- Octagon Brl
- Special Sights
- Rossi 92/Ranch Hand
- Rossi Rio Grande
- Laminate Black/Gray
- Laminate Brown/Tan
- Create Account
- Shipping & Returns
- Privacy Notice
- Conditions of Use
- Gift Certificate FAQ
- Discount Coupons
- Newsletter Unsubscribe
- New Arrivals
Skinner "BLACK GOLD" ~ $135
Skinner "GOLD" ~ $135
"STAINLESS" ~ $135
" ALL BLUE/BLACK" ~ $125
Copyright 2013-2023 Skinner Sights LLC / Andy Larsson - All Rights Reserved
- Sporting Goods
- Other Hunting
Front and Rear Ghost Ring FIRE SIGHT SET fits Rossi 92 44 Mag Octagon
Dovetail FIRE SIGHT SET
Fits Rossi 92 Lever Action
The day time sight that's lightweight , and yet very durable
It's the sight that brightens in low light situations.
Made from aircraft strength aluminum (front beads are made of steel)
DOVETAIL Ghost Ring FireSight SET for Rossi 92
Only Fits Rossi 92 24 inch Octagon Barrel in 44 mag Only Same Line of Sight as Rossi Factory Sights
Fits: Fits Post Braztech Rossi 92 Rifles with 3/8" dovetail
Does NOT fit Older Rossi's with a .40" dovetail unless
you shim or glue in place.
DOES NOT FIT MODELS WITH THE BARREL BAND SIGHT
Minor Fitting May be Required since the front sight dovetail
is very close to the barrel band.
Fully adjustable rear metallic FireSight Ghost fits
all standard 3/8 inch dovetails.
Rear sight is screw adjustable for elevation
and drift adjustable for windage;
has two , green, fiber optic dots
Front FireSight replaces existing factory sight insert
Front has red, fiber optic rod.
Brand new in Retail package
No gunsmithing required
Check out my other
- Condition: New
- Brand: Northwoods
- Model: Ghost Ring
- Country/Region of Manufacture: United States
- UPC: 0769272680203
PicClick Insights - Front and Rear Ghost Ring FIRE SIGHT SET fits Rossi 92 44 Mag Octagon PicClick Exclusive
- Popularity - 11 watchers, 0.0 new watchers per day , 840 days for sale on eBay. Super high amount watching. 11 sold, 0 available. More
Popularity - Front and Rear Ghost Ring FIRE SIGHT SET fits Rossi 92 44 Mag Octagon
11 watchers, 0.0 new watchers per day , 840 days for sale on eBay. Super high amount watching. 11 sold, 0 available.
- Best Price -
Price - Front and Rear Ghost Ring FIRE SIGHT SET fits Rossi 92 44 Mag Octagon
- Seller - 62,563+ items sold. 0.4% negative feedback. Great seller with very good positive feedback and over 50 ratings. More
Seller - Front and Rear Ghost Ring FIRE SIGHT SET fits Rossi 92 44 Mag Octagon
62,563+ items sold. 0.4% negative feedback. Great seller with very good positive feedback and over 50 ratings.
People also loved picclick exclusive.
AmeriGlo Ghost Ring Night Sight for Glock Gen 3 & 4 20 21 29 30 31 32 36 GL-126
AmeriGlo Ghost Ring Night Sight for Glock Gen 3 & 4 17 19 22 23 26 34 35 GL-125
Ameriglo Ghost Ring Tritium Sight Set For Glock Low GEN 1-4-GL-225
AmeriGlo Ghost Ring Night Sights Glock 17 19 22 23 24 26 27 33 34 35 37 - GL-125
XS WS Ghost Ring Marlin 336 1894 30AS Integral Ramp Front Rear Sight ML-0012-5
Aro Tek Night Ghost Ring Sight Set Standard +2 Rear .180 Front for Glock Pistols
AmeriGlo Ghost Ring Night Sight Set For Glock Low-Green Tritium-GL-125
Ameriglo Ghost Ring Tritium Sight Set For Glock Low GEN 1-4-GL-325
AmeriGlo Ghost Ring Night Sight Set For Glock High-Green Tritium-GL-126
Ameriglo Ghost Ring Night Sights For Glock 45/10 Green Front/Rear Gl126
Ameriglo For Glock Ghost Ring Green/White Outline Front & Green Rear Sights
AmeriGlo GL125 2-Piece Front and Rear Ghost Ring Sight - Black
Ameriglo Ghost Ring Tritium Sight Set For Glock High GEN 1-4-GL-226
Fire Skull Dead Left 3M Sticker Usa Made Marine Fire Soldier Vehicle Ghost Rider
Ameriglo Ghost Ring Sight Set White Front Green Tritium Rear For Glock - GL5125
Ameriglo Ghost Ring Sight Set LumiGreen Front Green Rear For Glock Gen 5 GL5325
AmeriGlo GL125 Ghost Ring for Glock 17/19/22/23 Green Steel Pistol Night Sight
Ameriglo Ghost Ring Tritium Sight Set For Glock High GEN 1-4-GL-226 attachment
Ameriglo Tritium Night Sight Set Glock Ghost Ring Green Front/Rear GL-126
AmeriGlo GL125 Ghost Ring Sights Fits Glock 17,19,22,23,24,26,27,33,34,35,37,
Ameriglo Ghost Ring Night Sight Set Green Tritium For Glock Gen 1-4 17 - GL125
Benelli m1 m2 m3 nova supernova ghost ring Front and Rear Sights
AmeriGlo Ghost Ring Night Sight Set For Glock Low-Green Tritium GL-125
Ghost Fiery Fire Skull Face Black Eyes Vinyl Decal Graphic Hood Wrap Car Truck
Ghost Fiery Fire Skull Face Black Eyes Hood Wrap Vinyl Decal Graphic Car Truck
- Mark Forums Read
- View Site Leaders
- Team Boolits
- Advanced Search
- Guns & Shooting
Rossi 92 sights
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
- Jump to page:
Thread: Rossi 92 sights
- Show Printable Version
- View Profile
- View Forum Posts
I have an older 92 with the barrel band front sight and square notch rear. They are getting a little tough for my older eyes. What are you guys using instead?
Founder of the Single Shot section. A government big enough to give you everything you want is big enough to take everything you have. 8 in the 10 ring, then I get a PING. Love my Garand.
Open up the rear sight to get more light around the front sight, if that's an option.
"In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire' The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery NRA Benefactor 2008
I am 70; had a 92 for a few years, but as I get older the further down the barrel the rear sight seems to get. I have a Williams 9436 rear sight but have not installed it yet; as it requires drilling and tapping. Thinking about getting one of the Skinner pep sights that replaces the safety.
Britons shall never be slaves.
My 45 colt had the sight on the front band. Is your rifle one without the, additional extra safe safety, on the top of the bolt? I put a marbles bullseye on mine and it is awsome. http://www.marblearms.com/rear-sights.html The dove tail on mine was extra wide so I made some brass shims from 0.005 stock to tighten things up. Jaaymar
I'm using a Dr. Pearson no drill tactical rail with a 4x lighted recital scout scope.Tried a red dot but like the scope better.Rail take 5 minutes to install.
Have a link?
Originally Posted by Jaaymar My 45 colt had the sight on the front band. Is your rifle one without the, additional extra safe safety, on the top of the bolt? I put a marbles bullseye on mine and it is awsome. http://www.marblearms.com/rear-sights.html The dove tail on mine was extra wide so I made some brass shims from 0.005 stock to tighten things up. Jaaymar I have seen those. Are you happy with the sight picture?
I had a hard time with the bullseye sight from Marlbles. I use progressive lenses and that sight gave me a hard time. Still have it if you want to give it a go. My suggestion is to use fire sights or get a red dot sight. https://store.stevesgunz.com/ I have a Noe scope mount on mine https://noebulletmolds.com/site/prod.../scope-mounts/ w/ a Burris 2x scope. This set up doesn't give a good cheek weld, more of a jaw weld, so I'm thinking of switching to a red dot. Don't get a tube type but a reflex, it will sit lower to the rifle. PM if you have questions.
Originally Posted by cabezaverde I have an older 92 with the barrel band front sight and square notch rear. They are getting a little tough for my older eyes. What are you guys using instead? I had an older Rossi that came to me missing the front barrel band - made a replacement from a chunk of steel, and made the sight blade about double width - then a wide square notch cut in the rear sight - it worked good and didnt alter the look of the gun - does yours have a steel front band ? maybe could TIG or braze up the blade and make it wider ? D & T the reciever for a williams peep Tang rear sight is an option The big headache is the barrel band front sight - you dont have any windage on a bolt mounted peep or a cheaper tang sight - the reciever mounted peep is a good option but I hear some Rossi's are tough steel to D & T
Originally Posted by kungfustyle I had a hard time with the bullseye sight from Marlbles. I use progressive lenses and that sight gave me a hard time. Still have it if you want to give it a go. My suggestion is to use fire sights or get a red dot sight. https://store.stevesgunz.com/ I have a Noe scope mount on mine https://noebulletmolds.com/site/prod.../scope-mounts/ w/ a Burris 2x scope. This set up doesn't give a good cheek weld, more of a jaw weld, so I'm thinking of switching to a red dot. Don't get a tube type but a reflex, it will sit lower to the rifle. PM if you have questions. Mine is older and not drilled or tapped.
. FWIW, Winchester Model 92's & Model 94's used the same sights, and the sights meant for those guns can be readily used on the Browning & Rossi Model 92's. Generally, the mounting of a receiver peep sight on a Model 92 raises the line-of-sight, thus requiring a taller front sight to achieve zero - quite an issue with the barrel band front sight. I was able to keep the issue front, and zero the rifle, by mounting a Williams receiver sight intended for the Winchester Angle Eject 94AE atop the rear section of the Model 92 receiver sidewalls (1 D/T'd hole in each sidewall top) - and YES, the metal was one of the toughest I've ever had to D/T. That particular receiver sight is usable with the issue front sight because it carries the horizontal aperture bar behind the sight base, ILO atop the base - so I merely put a dab of orange paint onto the top rear face of the issue front sight blade.
Now I lay me down to sleep A gun beside me is what I keep If I awake, and you're inside The coroner's van is your next ride
Doesn’t someone make a peep sight that fits the rear sight dovetail?
Steve gunz used to have sights for Rossi on his web site. I wouldn't mind having a way to mount a Burris fastfire on one of the old rossi's
I installed a Williams 5D reciever sight for a Winchester 94 on a Rossi- but on the right side of the action because of the saddle ring. I had to reverse the aperture windage slide but it worked fine. For a barrel sight I liked replacing the factory rear sight with a Dockendorff wheel adjust sight. A FastFire could be mounted on the barrel by custom fitting a Weaver base to a drilled and tapped dovetail blank. I've been thinking about this one lately.... Sent from my SM-A716U using Tapatalk
Originally Posted by cabezaverde Doesn’t someone make a peep sight that fits the rear sight dovetail? I bought a ghost ring sight from Steve’s Gunz. It fit in the rear dovetail. It’s a great addition for very little money.
Marbles tang w/ windage adj. for Rossi 92 w/ factory front sight. Works great!
Originally Posted by engineer401 I bought a ghost ring sight from Steve’s Gunz. It fit in the rear dovetail. It’s a great addition for very little money. Can't find on his site.
I went with an old 5D peep rear sight and a white dot in front. For the front make a small divit on the front sight and fill with enamel.
Originally Posted by KCSO I went with an old 5D peep rear sight and a white dot in front. For the front make a small divit on the front sight and fill with enamel. So you did drill and tap?
Have you looked under the rear sight? Mine was drilled and tapped for a forward mount scope. I also tried the Steve's Gunzs peep sight that replaced the mickey mouse safety on top of the bolt. Siamese4570
- Private Messages
- Who's Online
- Search Forums
- Forums Home
- Classics & Stickies
- Frequently Asked Questions
- Hunting with CB's
- Deep Theological Discussion
- Cookin' Recipe's
- Helping Hands
- In Remembrance
- Testing Area
- Black Powder Paper Patching
- Boolit Lube !
- Case Forming / Re-forming
- Cast Boolits
- The Star Equipment Corner
- Casting and Reloading Hand Tools
- Casting & Reloading for Shotguns
- Coatings and Alternatives
- Lead and Lead Alloys
- Molds...Maintenance and Design
- Reloading Equipment
- Shot Loads For Pistols
- Smokeless Paper Patching
- Black Powder Substitutes
- Factory & Surplus Powder
- CB Loads / Military Rifles
- CB Loads, Your Favorite Cartridge
- Equipment Reviews and Discussion
- Factory Rifles
- Get-Togethers, Competition and Results
- "The Barrel Works"
- Military Rifles
- Rimfire Area
- Single Shot Guns
- 3D PRINTED RELATED ITEMS
- Wheelguns, Pistols and Handcannons
- Vintage Ammo
- Vintage Boxes - Gear, Shell, Case, Primer
- Vintage Gun Books
- Vintage Powder Cans / Tins
- Vintage Reloading Gear
- Vintage Reloading Manuals
- Vintage Rifle & Range Scopes
- Group Buy Discussion
- GB RUN BY Lakehouse2012
- GB RUN BY bluejay75
- GB RUN BY Wasalmonslayer
- GB RUN BY 2 dogs
- Closed Buys/Waiting for delivery/in shipment
- Group Buy Results
- Group Buy Archives
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
- Cast Boolits Home
- Privacy Statement
The Forum for the Rossi Enthusiast! This site is not associated with RossiUSA/Braztech nor is RossiUSA/Braztech responsible for this site's content.
Skip to content
- Board index The Firearms 92
XS ghost ring sight on new Rossi 92
Post by pistolcalrookie » 11 Aug 2014 11
Re: XS ghost ring sight on new Rossi 92
Post by pistolcalrookie » 14 Aug 2014 10
Post by Ranch Dog » 14 Aug 2014 12
Post by Archer » 15 Aug 2014 08
Post by Ranch Dog » 15 Aug 2014 13
Archer wrote: XS??
Post by Archer » 16 Aug 2014 03
Post by phoenix1151 » 22 Aug 2014 20
Post by Archer » 23 Aug 2014 00
Post by pistolcalrookie » 15 Sep 2014 12
Post by Rooster59 » 15 Sep 2014 17
Return to “92”
- ↳ Registration, Rules, and Information
- ↳ Member Introductions
- ↳ Topic Bucket
- The Firearms
- ↳ 92
- ↳ Circuit Judge
- ↳ Ranch Hand
- ↳ R95 & Rio Grande
- ↳ Revolvers
- ↳ Single Shots
- ↳ All Other Rossi's
- ↳ All Non-Rossi Leverguns
- ↳ All Other Firearms
- ↳ Factory Stuff
- ↳ Handloading
- ↳ Software
- ↳ Bullet Casting
- The Firing Line
- ↳ Cowboy Action
- ↳ Field/Hunting Stories, Tales, & Topics
- ↳ The Shooting Range
- The Support
- ↳ DIY Gunsmithing, Projects, & Tips!
- ↳ RossiUSA web site
- ↳ RossiUSA Advertisements & Catalogs
- ↳ Shop Rossi
- ↳ Rossi Customer Service Experiences
- Buy, Sell, Trade, or Pay It Forward - Member to Member Transactions
- ↳ Rossi Firearms
- ↳ Other Firearms
- ↳ All Other Items
- Board index
- All times are UTC+01:00
Powered by phpBB ® Forum Software © phpBB Limited
Privacy | Terms
The Scout Rifle Forum
Need a rifle sling? http://www.andysleather.com
- The Scout Rifle Forum »
- General Discussion »
- Lever Actions »
- Rear ghost ring sight options for the Rossi 92
Author Topic: Rear ghost ring sight options for the Rossi 92 (Read 6665 times)
0 Members and 1 Guest are viewing this topic.
- Posts: 2179
Re: rear ghost ring sight options for the rossi 92.
I have the Steve's guns on my R92 and I like it. I also have the scope mount and run a TRS25.
- Posts: 1441
Quote from: meangreenlx50 on September 10, 2019, 09:16:52 PM I have the Steve's guns on my R92 and I like it. I also have the scope mount and run a TRS25.
- Posts: 2210
- Posts: 1487
Yeah, Mean, which rail are you using? The right rail for the forward mount on the Rossi 92 is the P892 (picture below). It has a rise from rear to front that matches the barrel taper through the rail mounting area. Sadly, the P892 has been out of production for years. You can still find the P801 which has the same screw hole pattern, but it has no rise and would raise the point of impact well into or above the adjustment range of most Scout scopes. Rossi obviously doesn't think much about forward scopes.
Lots of good ideas from Noe, but it's way too tall. And the countersink holes are too deep to mill it down to the right height.
- SMF 2.0.19 | SMF © 2021 , Simple Machines | Mods by SMFSimple.com SMFAds for Free Forums
Bad Behavior has blocked 416 access attempts in the last 7 days.
This page requires cookies. Do you agree with the usage of cookies? Yes No
- Search Search
- You have no notes.
- Forgot your password?
- 0 Continue shopping The product was successfully added to your shopping cart Your shopping cart is empty Proceed to checkout Continue shopping
European Distributor of famous US Brands
Customer Service +49 (0)9384 88 212 00
Marble Arms Sight Ghostring/Bullseye Short Blade
Prices incl. VAT plus shipping costs
Ready to ship today. Delivery time 1-3 workdays
Product information Sight Ghostring/Bullseye Short Blade
- Your questions
- Further products by Marble Arms
Customer rating for "Sight Ghostring/Bullseye Short Blade"
Sehr gutes visier für "ältere" augen.
Sehr gutes Visier für "ältere" Augen, leichte Nacharbeiten für meine Rossi Puma erforderlich (2/10 mm mußten am Schwalbenschwanz des Visiers mit der Schlüsselfeile "gekürzt" werden)
Sehr schneller Versand und Lieferung
Die Ware kam verdammt schnell in Österreich an! Da kaufe ich gerne wieder ein!! Die Visier selbst ist einfach perfekt!! MfG
Ghostring/Bullseye rear sight.
Brilliant rear sight gets you on target quickly. Easy to fit and easy to zero. Really great Customer care also.
Das Teil sieht sehr gut aus, passt aber leider nicht. Es muss zuerst noch nachgearbeitet ( Schlüsselfeile) werden. Die Qualität stimmt.
Sehr schnelle Lieferung nach AT. Passt perfekt und war schnell auf meiner Rossi M92 montiert
Optimal zur Jagd über die offene Visierung. Zusammen mit einem HIViz-Leucht-Korn Spitze. Passte auf eine Marlin 336 mit etwas Feilen stramm in die Führung.
Danke für die schnelle Lieferrung. Mfg.Th. R.
Excellent sight - Simple to Use
Ideal for rapid acquisition of foresight
The fields marked with * are required.
Lyman Peep Sight No.2 Win&Brow 1886
Magnum research front sight fiber hoch bfr, magnum research front sight fiber extra high bfr, marble arms sight ghostring/bullseye long blade, marble arms folding sight sporting short blade, marble arms sight full-buckhorn short blade, hiviz rear sight fiber adjustable rifle, marble arms sight semi-buckhorn high long blade, marble arms sight flat top classic long blade, marble arms folding sight flat standard height, marble arms tang sight set rossi 65+1892, taurus sight target no.17 rossi m92, marble arms slot blank black rifle, marble arms sight full-buckhorn long blade, marble arms sight flat top classic short blade, marble arms sight semi-buckhorn long blade, lyman peep sight no.2 win-1892/1894, marble arms sight flat top high long blade, lyman peep sight set marlin 30/336/1894+95, lees gunsmithing spring kit taurus & rossi m92, marble arms front sight .500" gold brass 1/16", taurus sight buckhorn no.17 rossi m92, marble arms sight flat top high short-blade, hiviz front sight fiber 4-color henry rifle, marble arms sight semi-buckhorn short blade, hiviz front sight fiber .500" rifle, hiviz front sight fiber .420" rifle, fioptics mount rail rossi m92, lpa sight fiber green octagon rifle, marble arms tang sight set uberti 1873, hiviz front sight fiber .380" rifle, taurus front sight 8mm target m92, marble arms tang sight set win-1873 miroku, xs sights sight set ghostring marlin 1895, marble arms sight ghostring/bullseye fixed, lyman peep sight no.2 uberti 1873, wolff gunsprings spring pak rp marlin la-rifle, marble arms sight semi-buckhorn high short blade, marble arms ramp front sight fiber .410" orange, lpa sight target black rifle.
There was a problem loading comments right now. Please try again later.
- Amazon Newsletter
- About Amazon
- Press Center
- Investor Relations
- Amazon Devices
- Amazon Science
- Start Selling with Amazon
- Sell apps on Amazon
- Supply to Amazon
- Protect & Build Your Brand
- Become an Affiliate
- Become a Delivery Driver
- Start a Package Delivery Business
- Advertise Your Products
- Self-Publish with Us
- Host an Amazon Hub
- › See More Ways to Make Money
- Amazon Visa
- Amazon Store Card
- Amazon Secured Card
- Amazon Business Card
- Shop with Points
- Credit Card Marketplace
- Reload Your Balance
- Amazon Currency Converter
- Your Account
- Your Orders
- Shipping Rates & Policies
- Amazon Prime
- Returns & Replacements
- Manage Your Content and Devices
- Your Recalls and Product Safety Alerts
- Conditions of Use
- Privacy Notice
- Your Ads Privacy Choices