Class Contact Information
Click below
Class Email
Class Website
One-Design Class Type: Keelboat
Was this boat built to be sailed by youth or adults? Both
Approximately how many class members do you have? 300
Photo Credit:Patrick Tregenza
Photo Credit: Bill Brine
Photo Credit: Alyce Athay Croasdale
About Shields
Conceived by Cornelius Shields in the 1960’s as a fiberglass renewal of his cherished IOD class, this Sparkman and Stephens design remains the finest one-design sailboat ever produced. With active fleets sailing throughout the Northeast, Chesapeake Bay, Lake Michigan and California, Shields are raced by sailors who love to compete. At 30′ this 4,ooo lb. keelboat will impress you with its ability perform on windward legs and will delight the crew with its ability to drive deep while running. Don’t dismiss this as “just another pretty boat” until you have experienced the essence of one-design racing in a Shields. Very affordable, Shields sailboats have remained true to their original charter and maintain strict class rules on sail purchases to create a level playing field for all competitors. If you are interested in owning a Shields or starting a fleet, please contact us at [email protected]
Shields Class Foundation – Information- https://shieldsclassfoundation.org
Boats Produced: 259
Class boat builder(s):
Cape Cod Shipbuilding
Approximately how many boats are in the USA/North America? 175
Where is your One-Design class typically sailed in the USA? List regions of the country:
New England, Great Lakes, Chesapeake Bay and California
Does this class have a spinnaker or gennaker? Yes
How many people sail as a crew including the helm? 3-5
Ideal combined weight of range of crew: 900
Boat Designed in 1962
Length (feet/inches): 30′ 2 1/2″
Beam: 6′ 5 1/4″
Weight of rigged boat without sails: 4600
Draft: 4’9″
Mast Height: 39′ 4 5/8″
Back to One-Design Central
Copyright ©2018-2024 United States Sailing Association. All rights reserved. US Sailing is a 501(c)3 organization. Website designed & developed by Design Principles, Inc. -->
IOD Class Norway
Norwegian Association for IOD sailors and enthusiasts
The Isegran IOD story
The IOD (International One Design) sailboat has a rich history dating back to the early 20th century. The design of the IOD class was influenced by the Universal Rule, a rating rule developed in the early 20th century to handicap different designs of racing yachts. The idea was to create a level playing field for boats of different sizes and designs to compete against each other.
The IOD class specifically originated in 1936 when a group of American sailors spearheaded by Cornelius “Corny” Shields of Larchmont (NY) Yacht Club, commissioned the renowned Norwegian designer Bjarne Aas to create a 33-foot keelboat that would be suitable for both cruising and racing. The inspiration was Bjarne Aas 6 Metre “Saga” that Shields fell in love with on Bermuda. Aas came up with a design that combined classic lines with modern features, and the first (wooden) IOD boats were built in the Bjarne Aas shipyard on the island of Isegran, Norway to ensure maximum equality.
Over the years, the IOD class has seen some modifications, but the basic design principles have remained largely unchanged. The class has maintained its strict one-design philosophy to ensure that all boats are as equal as possible, placing the emphasis on the skill of the sailors rather than the technical specifications of the boats.
The class gained international popularity, and soon IOD fleets were established in various countries. The class rules were established to ensure that the boats remained true to the original design, promoting fair competition. The IOD class became known for its elegant appearance, seaworthiness, and competitive racing.
Today, the IOD class continues to thrive, with fleets racing in various locations around the world. The class has become a symbol of classic yacht racing, and many sailing enthusiasts appreciate the timeless design and competitive spirit of the International One Design sailboat.
Bjarne Aas and Cornelius Shields
We noticed you're visiting from Norway. We've updated our prices to Norwegian krone for your shopping convenience. Use United States (US) dollar instead. Dismiss
Published on August 10th, 2015 | by Editor
International One-Designs were conceived out of love
Published on August 10th, 2015 by Editor -->
It was a classic case of coup de foudre, as the French call it: love at first sight.
The year was 1936, and the Larchmont (NY) Yacht Club’s famed racing skipper, the late Cornelius “Corny” Shields — dubbed “the gray fox of Long Island Sound” for his competitive spirit and wily knowledge of the Sound’s tricky tides and weather — was racing in Bermuda when he caught sight of a brand new, 6-meter yacht, “Saga,” built by Norwegian boat designer Bjarne Aas.
“The minute I saw Saga, I fell in love with her,” Shields later wrote. “I thought she was the most beautiful boat I had ever seen. I loved her shape, her sheer, her dainty transom, and her long, straight counter. It was terrible. All I could think about on the way back to the States were the lines of that darned boat. She literally haunted me.”
With an eye toward replacing his aging home fleet of Sound Interclubs with more modern vessels, Shields contacted Aas and asked him if he might consider creating a new class of One-Design boats along the same lines as Saga, though somewhat shorter than her 37 feet. (Confusingly, the term “6-meter” does not refer to the boat’s length, but its designation under the “International Rule,” a complex, yacht-racing formula involving waterline length, hull configurations, sail area, and other factors.)
The result of this fateful alchemic collaboration was the 33-foot International One-Design (IOD) racing sloop, a boat with “lines as clean as a smelt’s and each and every line perfect for its purpose,” as the late English boat-builder Uffa Fox described Aas’s creation. The boat’s full-length, edge-glued planking of Oregon pine (later, African mahogany) was so elegantly and seamlessly crafted, her hull looked “like the side of a porcelain bathtub,” as Shields recalled.
Of the nearly 300 original wooden One-Designs built by Aas between 1936 and 1970, together with later fiberglass models made in Maine and Bermuda after Aas’s death in 1983, around 150 still race in a total of a dozen yacht clubs around the world from Bermuda to Norway, Sweden to the British Isles, in Nantucket, Marblehead, Northeast Harbor, and Long Island Sound. Recognized as among the best IOD sailors the world over are theowners of the Fishers Island Yacht Club’s fleet of 11 One-Designs, which sail out of West Harbor. – The Westerly Sun, read on
Tags: International One Design , IOD
Related Posts
Conversations with Classic Boats →
IOD North American Championship 2019 →
2019 IOD World Championship →
Sail Canada Sailor of the Month →
© 2024 Scuttlebutt Sailing News. Inbox Communications, Inc. All Rights Reserved. made by VSSL Agency .
- Privacy Statement
- Advertise With Us
Get Your Sailing News Fix!
Your download by email.
- Your Name...
- Your Email... *
- Name This field is for validation purposes and should be left unchanged.
History of the International One Design Class – 86 Years
St. francis yacht club – speaker: herb motley, author; historian, retired president of international one design world class association.
Herb Motley of Marblehead recently completed his 45th year of racing in the International One Design Class. Herb will share insights from his 10 years of research leading to the 75th Anniversary publication of a class history. He had the good fortune to crew for 10-time World Champion Bill Widnall, sailing in every port IODs can be found. He was twice-elected World President of the IOD World Class Association. His granddaughter, Abi Borggaard, competes on the Tulane University intercollegiate sailing team, so the trend continues. The IODs first came to San Francisco in 1953. The most notable IOD skipper from San Francisco was the famous Jake Wosser who won the Worlds, a then-unprecedented three times.
Related posts:
- St. Francis Yacht Club – “Commodore” Tompkins
- Cowes Regatta (1961)
- Coronet Arrives in Mystic
- Sparkman & Stephens “Edlu II”
Leave a Comment Cancel
Your email address will not be published. Required fields are marked *
Email Address:
Save my name, email, and website in this browser for the next time I comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed .
- O’pen Skiff Purchase Page
- ILCA – Element 6
- RS Sailboats
- Sunfish – Recreational
- Sunfish – Race Version
- Sunfish Sails
- LaserPerformance Sunfish Parts Price List
- 420 – Zim Sailing
- Finding the Right Laser Rig: Formula
- Racks by Dynamic Dollies and Racks
- Load Rite Trailers
- Load Rite Sunfish Trailer
- **NEW** LoadRite for Sailboats
- Sunfish Dolly by Dynamic
- Optimist Dolly by Dynamic
- How to Apply Laser Sail Numbers
- Applying Laser Sail Numbers
- North Sails for LaserPerformance Dinghies
- About/Contact
The Optimist Dinghy – sailed by kids since 1947
Rewind the clock back 66 years:
Beginings: In 1947, the Clearwater Florida version of the “Soapbox Derby” called the “Orange Crate Derby” was sponsored by the Clearwater Optimist Club . Optimist member, Major Clifford McKay promoted the idea, and it finally made some headway with other members. He contacted local boat builder, Clark Mills about the idea and asked Mills to design a small sailboat that could be made for under $50.
Design Phase: Mills started sketching and soon ran into a basic limitation. Plywood comes in eight foot sheets. So, he knew the boat had to be less than eight feet. Since it was hard to put a pointed bow in an eight foot boat, he designed it as a pram. Clark Mills noted that the size and shape of the world’s largest class was dictated by the dimensions of a sheet of plywood and by McKay’s $50 budget. Mills chose a sprit rig, to allow some shape in the poorly designed, often home-sewn sails of the era. Mills vividly recalls the very first Optimist hull. “It wasn’t pretty, because Major McKay wanted it fast, for the next Optimist Club meeting. I hammered it together in a day and a half with 10 penny galvanized nails, slapped on a coat of paint, and called her an ‘Optimist Pram.’ We rigged her up in the hotel lobby where the Optimist Club met.”
Birth of the IOD: The Optimist was mainly a Florida phenomenon until 1958, when Axel Damgaard, the captain of a Danish tall ship, visited the United States and was inspired by the design. With Mills’ permission, he took an Optimist back to Europe, modified it, and renamed it the International Optimist Dinghy. The IOD had a battened sail and much simplified running rigging. The new design spread quickly, first through Europe then all around the world.
The Decline of the Pram: The IOD collided with a large, established fleet of Optimist Prams in the U.S. As more and more IODs landed on the shores of the U.S., regattas were scheduled for both Prams and IODs. As late as 1985, separate regattas were held for both boats. Many sailors from the 1970s and 1980s owned two boats, to sail in both types of regattas. In the early 1980s, the scales were tipping in favor of the IOD. The number of Prams steadily declined and, by the mid 1980s, Pram racing opportunities had dried up.Today, Prams are occasionally found in learn-to-sail and community sailing programs but they are no longer an organized class and are virtually never raced.
Image shows the design changes from the 1947 Optimist to the modern IOD: For more history and images visit Wooden Optimist
The originator of the design: Clark Mills recounts the story of the Optimist Pram in Clearwater, Florida:
Share this:.
- Click to email this to a friend (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to print (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on LinkedIn (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Reddit (Opens in new window)
THE MELGES 15!
THE ROCKET! Built in the USA
SUNFISH – SAIL A CLASSIC!
Recent Posts
Hours & Info
Search products.
Contact us:
Any questions about the sailboats we sell, or the services we provide? We’re always eager to talk sailing and would enjoy helping you with any of your sailing needs. Contact Us
Designed by WPZOOM
Boat Details
- Sail With Us
- IOD Class Links
- Bermuda Links
- Executive Committee
Written by Super User on 08 March 2012 . Posted in History .
The Bermuda IOD Fleet
A Bit More History
Class history.
Specifications
LOA | 33'5" |
LWL | 21'5" |
Beam | 6'9" |
DSPL | 7,100 lbs |
Draft | 5'4" |
History of the IOD Class
The Bermuda International One Design Fleet is the oldest actively raced sailing fleet in Bermuda, with a history of over 60 years of competitive world-class racing. The International One Design (IOD) is a graceful, classic design which was the first class to be recognized by the International Sailing Federation in the Classic Yacht category. The IOD design has its roots in a Six-Metre yacht named “Saga”, built in 1935 for Eldon and Kenneth Trimingham of Bermuda. The six metre design was modified to make the boat easier to handle as a one design class racer. The first five Bermuda IODs arrived in 1938. Since then, IOD fleets have been established internationally, and now actively race in Norway, Sweden, Scotland, the east and west coasts of the USA, and Bermuda.
The Bermuda IOD Fleet’s racing schedule spans March to November each year, and includes over 30 events. The IOD is the boat of choice for the prestigious King Edward VII Gold Cup Match Racing event held each year in Hamilton Harbour. The International One Design can inarguably be considered the most recognized sailing fleet in Bermuda.
The Bermuda IOD Fleet welcomes new skippers and crew who wish to sail.
Written by Super User on 30 March 2012 . Posted in Skippers & Crew .
Sail # | Name | Hull Colour | Owner | Location |
---|---|---|---|---|
2 | Ariel | White | Penny Simmons | Agar's Island |
5 | Encore | Red | Bob Duffy | Pitt's Bay |
6 | Blitz | White | George Cubbon | Agar's Island |
10 | Bounty | White | Walker's | Soncy Bay |
11 | Solna | Dark Green | Patrick Cooper | Soncy Bay |
14 | Gaylord | Grey | IOD Class Association | Watlington Island / Timlins |
15 | Privateer | Dark Green | Michael Richold | Pitt's Bay |
16 | Vrengen | Turquoise | Craig Davis | Soncy Bay |
17 | Falcon | Dark Blue | Rick Thompson | Soncy Bay |
18 | Dalliance | White | Kevin Horsfield | Whites Island |
20 | Impulse | White | Walker's | Soncy Bay |
21 | Peppercorn | Yellow | Walker's | Agar's Island |
22 | Slingshot | White | Preston Hutchings | Whites Island |
23 | Shadow | Black | Walker | Agar's Island |
Review of IOD
Basic specs..
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.
Unknown keel type
The keel is made of lead. Compared with iron, lead has the advantage of being 44% heavier, which allows a smaller keel and hence less water resistance and higher speed.
The boat can enter most marinas as the draft is just about 1.62 - 1.72 meter (5.31 - 5.61 ft) dependent on the load. See immersion rate below.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for IOD is 1.41, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 6.2 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for IOD is about 90 kg/cm, alternatively 504 lbs/inch. Meaning: if you load 90 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 504 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
What is L/B (Length Beam Ratio)?
What is a Ballast Ratio?
What is Displacement Length Ratio?
What is Relative Speed Performance?
Maintenance
When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 18m 2 (193 ft 2 ). Based on this, your favourite maritime shop can tell you the quantity you need.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
Mainsail halyard | 31.1 m | (101.9 feet) | 10 mm | (3/8 inch) |
Jib/genoa halyard | 31.1 m | (101.9 feet) | 10 mm | (3/8 inch) |
Spinnaker halyard | 31.1 m | (101.9 feet) | 10 mm | (3/8 inch) |
Jib sheet | 10.2 m | (33.4 feet) | 12 mm | (1/2 inch) |
Genoa sheet | 10.2 m | (33.4 feet) | 12 mm | (1/2 inch) |
Mainsheet | 25.4 m | (83.5 feet) | 12 mm | (1/2 inch) |
Spinnaker sheet | 22.4 m | (73.5 feet) | 12 mm | (1/2 inch) |
Cunningham | 4.9 m | (16.1 feet) | 10 mm | (3/8 inch) |
Kickingstrap | 9.8 m | (32.2 feet) | 10 mm | (3/8 inch) |
Clew-outhaul | 9.8 m | (32.2 feet) | 10 mm | (3/8 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for IOD it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.
International One Design
Fleet information.
Upcoming races
Klm iod askeröfjorden, annual meeting iod.
Learn more about us
What and where.
- Print This Page
- Text Size
- Scroll To Top
Welcome to the MC Sailing Association
Upcoming Events
2024 regatta results.
“HISTORY OF THE SCOW” Film Proposal Woody Woodruff has been sailing scows a long time and is using his talents as a film producer to make a documentary film on scows: The Project Donate Here
© MC Sailing Association, Inc. 2024. All Rights Reserved.
SAILING SCHOOL
12 knots sailing courses.
Weather forecast
Learn how to read clouds and winds like a pro
Competent Crew
Introduction to sailing. Learn how to become an active crew
Bareboat Skipper
Recreational sailing yacht skipper of vessels up to 78 feet
Issued documents
10 days live aboard course on power or sailing yacht. The key objective of the course is to teach candidates to become a recreational sailing yacht skipper and be able to charter and handle big cruising yachts on their own.
Ideal for those who already have little sailing experience and would like to learn coastal navigation.
- navigation at sea
- collision regulations
- practice at sea 200nm
- Skipper on a yacht up to 78ft. / 24m
- 20 miles offshore in day time
- in moderate weather conditions
5-day sailing course on board of a cruising yacht. The main objective of the course is to teach basic sailing terminology, parts and functions, basic sail trim, helm commands, seamanship and safety.
Ideal for candidates with little to no previous sailing experience who wish to train to become an active crew member on a power or sailing yacht.
- no special requirements
- Crew on a yacht up to 78ft. / 24m
- in sight of land and in fair weather
- only with professional skipper
Choose your sailing program. Where to start?
Introduction to sailing, on the coast.
Sailing knots - 3 hours
Understanding of the boat - 3 hours
On the water
Basic keelboat - 3 hours
Basic cruising
Safety on board - 3 hours
Live aboard sailing boat - 5 days
Live aboard power boat - 7 days
Bareboat cruising
Mandatory shore-based course for navigation and collision regulations at sea
Passage planning
Collision regulations
Practice at sea
Sailing boat - 10 days
Motor boat - 7 days
Advanced coastal cruising
Take additional shore-based courses prior to practice at sea
Long-term passage planning
Tidal navigation
Night sailing
Celestial navigation
Live-aboard course in tidal waters
Sailing yacht - 7 days
Upcoming courses
Blue water sailing practice
from ₽18,630
Availability
Competent crew
from ₽10,890
Marine weather forecasting
from ₽1,350
“Perfect boat”
A trust company. Very professional, one small problem we had with an error displayed on one of the oil pressure motors. They came after us and fixed the problem. We had a Lagoon 40 (2021) a very good boat.
Sailing School
1-208-882-4534
- Our Facility
- Why Choose Us
- Privacy Policy
- Pre-Arrangements
- Pre-Arrangements Form
- The Talk of a Lifetime
- Veterans Overview
- Veterans Headstones
- Veterans Burial Flags
Making Arrangements
Grief Support
When Death Occurs
Funeral Etiquette
Social Security Benefits
Frequent Questions
Links of Interest
Click on the questions below to reveal each respective answer.
New Section - add your content below
Why have a funeral.
Funerals fill an important role for those mourning the loss of a loved one. By providing surviving family and friends with an atmosphere of care and support in which to share thoughts and feelings about death, funerals are the first step in the healing process. It is the traditional way to recognize the finality of death. Funerals are recognized rituals for the living to show their respect for the dead and to help survivors begin the grieving process.
You can have a full funeral service even for those choosing cremation. Planning a personalized ceremony or service will help begin the healing process. Overcoming the pain is never easy, but a meaningful funeral or tribute will help.
What does a Funeral Director do?
- Pick up the deceased and transport the body to the funeral home (anytime day or night)
- Notify proper authorities, family and/or relatives
- Arrange and prepare death certificates
- Provide certified copies of death certificates for insurance and benefit processing
- Work with the insurance agent, Social Security or Veterans Administration to ensure that necessary paperwork is filed for receipt of benefits
- Prepare and submit obituary to the newspapers of your choice
- Bathe and embalm the deceased body, if necessary
- Prepare the body for viewing including dressing and cosmetizing
- Assist the family with funeral arrangements and purchase of casket, urn, burial vault and cemetery plot
- Schedule the opening and closing of the grave with cemetery personnel, if a burial is to be performed
- Coordinate with clergy if a funeral or memorial service is to be held
- Arrange a police escort and transportation to the funeral and/or cemetery for the family
- Order funeral sprays and other flower arrangements as the family wishes
- Provide Aftercare, or grief assistance, to the bereaved
What do I do when a death occurs?
The funeral home will help coordinate arrangements with the cemetery.
- Father's Name
- Mother's Name
- Social Security Number
- Veteran's Discharge or Claim Number
- Marital Status
- Contact your clergy. Decide on time and place of funeral or memorial service. This can be done at the funeral home.
- The funeral home will assist you in determining the number of copies of the death certificates you will be needing and can order them for you.
- Make a list of immediate family, close friends and employer or business colleagues. Notify each by phone.
- Decide on appropriate memorial to which gifts may be made (church, hospice, library, charity or school).
- Gather obituary information you want to include such as age, place of birth, cause of death, occupation, college degrees, memberships held, military service , outstanding work, list of survivors in immediate family. Include time and place of services. The funeral home will normally write article and submit to newspapers (newspaper will accept picture and they will be returned intact).
- Arrange for members of family or close friends to take turns answering door or phone, keeping careful record of calls. If Social Security checks are automatic deposit, notify the bank of the death.
When I call, will someone come right away?
If you request immediate assistance, yes. If the family wishes to spend a short time with the deceased to say good-bye, that’s perfectly acceptable. Your funeral director will come when your time is right.
Should I choose Burial or Cremation?
Burial in a casket is the most common method of disposing of remains in the United States, although entombment also occurs. Cremation is increasingly selected because it can be less expensive and allows for the memorial service to be held at a more convenient time in the future when relatives and friends can come together.
A funeral service followed by cremation need not be any different from a funeral service followed by a burial. Usually, cremated remains are placed in urn before being committed to a final resting place. The urn may be buried, placed in an indoor or outdoor mausoleum or columbarium, or interred in a special urn garden that many cemeteries provide for cremated remains. The remains may also be scattered, according to state law.
Why have a public viewing?
Viewing is a part of many cultural and ethnic traditions. Many grief specialists believe that viewing aids the grief process by helping the bereaved recognize the reality of death. Viewing is encouraged for children, as long as the process is explained and the activity is voluntary.
What is the purpose of embalming?
Embalming sanitizes and preserves the body. Embalming makes it possible to lengthen the time between death and the final disposition, allowing family members time to arrange and participate in the type of service most comforting to them.
Does a dead body have to be embalmed, according to law?
The Federal Trade Commission says, "Except in certain special cases, embalming is not required by law. Embalming may be necessary, however, if you select certain funeral arrangements, such as a funeral with viewing. If you do not want embalming, you usually have the right to choose an arrangement that does not require you to pay for it, such as direct cremation or immediate burial."
Why are funerals so expensive?
When compared to other major life events like births and weddings, funerals are not expensive. A wedding costs at least three times as much; but because it is a happy event, wedding costs are rarely criticized. A funeral home is a 24-hour, labor-intensive business, with extensive facilities (viewing rooms, chapels, limousines, hearses, etc.), these expenses must be factored into the cost of a funeral.
Additionally, the cost of a funeral includes not only merchandise, like caskets, but the services of a funeral director in making arrangements; filing appropriate forms; dealing with doctors, ministers, florists, newspapers and others; and seeing to all the necessary details. Funeral directors look upon their profession as a service, but it is also a business. Like any business, funeral homes must make a profit to exist.
Do I have to make different funeral arrangements if I choose cremation?
It really depends entirely on how you wish to commemorate a life. One of the advantages of cremation is that it provides you with increased flexibility when you make your funeral and cemetery arrangements. You might, for example, choose to have a funeral service before the cremation; a memorial service at the time of cremation or after the cremation with the urn present; or a committal service at the final disposition of cremated remains. Funeral or memorial services can be held in a place of worship, a funeral home or in a crematory chapel.
What can be done with the cremated remains?
With cremation, your options are numerous. The cremains can be interred in a cemetery plot, i.e., earth burial, retained by a family member, usually in an urn, scattered on private property, or at a place that was significant to the deceased. (It would always be advisable to check for local regulations regarding scattering in a public place-your funeral director can help you with this.)
Today, there are many different types of memorial options from which to choose. Memorialization is a time-honored tradition that has been practiced for centuries. A memorial serves as a tribute to a life lived and provides a focal point for remembrance, as well as a record for future generations. The type of memorial you choose is a personal decision.
What is memorialization for a cremation?
You might choose ground burial of the urn. If so, you may usually choose either a bronze memorial or monument. Cremation niches in columbariums are also available at many cemeteries. They offer the beauty of a mausoleum setting with the benefits of above ground placement of remains. Many cemeteries also offer scattering gardens. This area of a cemetery offers the peacefulness of a serene garden where family and friends can come and reflect.
Can we scatter the cremated remains?
If you wish to have your ashes scattered somewhere, it is important to discuss your wishes to be scattered ahead of time with the person or persons who will actually have to do the cremation ashes scattering ceremony, as they might want to let your funeral professional assist in the scattering ceremony. Funeral directors can also be very helpful in creating a meaningful and personal ash scattering ceremony that they will customize to fit your families specific desires. The services can be as formal or informal as you like. Scattering services can also be public or private. Again, it is advisable to check for local regulations regarding scattering in a public place-your funeral director can help you with this.
If I am cremated, can I be buried with my spouse even if he or she was in a casket?
Yes — Depending upon the cemetery's policy, you may be able to save a grave space by having the cremains buried on top of the casketed remains of your spouse, or utilize the space provided next to him/her. Many cemeteries allow for multiple cremated remains to be interred in a single grave space.
What do I need to know about income tax when I lose a spouse?
Uncertainty about income tax issues can add to the stress experienced from the death of a spouse. You should meet with your family attorney and/or tax advisor as soon as possible to review your particular tax and estate circumstances. Bring a detailed list of your questions to the meeting. If you do not have an attorney or tax advisor, call the IRS toll-free at 800-829-1040 for answers to specific tax questions.
Is there financial help if I need it?
There are a number of options available, including:
- Determine if the deceased person qualifies for any entitlements. Check with the Social Security Administration, the Department of Veterans Affairs, and with your State Fund. Many people are entitled to get financial assistance with their funeral costs from these agencies if they qualify.
- Review all insurance policies the deceased person has, including life insurance. Some life insurance policies have coverage clauses for funeral related costs.
- Find local charities providing financial help for funeral expenses. Search for non profit organizations and for churches in your area.
- Talk to your funeral director about cremation options - these can be much less expensive depending on your choices.
In this section
A year of daily grief support.
Our support in your time of need does not end after the funeral services. Enter your email below to receive a grief support message from us each day for a year. You can unsubscribe at any time.
- Скидки дня
- Справка и помощь
- Адрес доставки Идет загрузка... Ошибка: повторите попытку ОК
- Продажи
- Список отслеживания Развернуть список отслеживаемых товаров Идет загрузка... Войдите в систему , чтобы просмотреть свои сведения о пользователе
- Краткий обзор
- Недавно просмотренные
- Ставки/предложения
- Список отслеживания
- История покупок
- Купить опять
- Объявления о товарах
- Сохраненные запросы поиска
- Сохраненные продавцы
- Сообщения
- Развернуть корзину Идет загрузка... Произошла ошибка. Чтобы узнать подробнее, посмотрите корзину.
COMMENTS
The International One Design (IOD, International) is a class of sail boat developed in 1936 for yacht racing. It is a 33-foot open-cockpit day sailer used for day racing, rather than for overnight or ocean races. Popularised prior to the Second World War, the International One Design class is considered a classic one today.
Boats; FEEDBACK; News. ISABELLE FARRAR WINS FIRST-EVER WOMEN'S IOD INVITATIONAL FIVE ... Bermuda International Race Week Spring 2025 EYC Women's IOD Invitational September 2024 Nantucket Celebrity Invitational August 2024 UPCOMING REGATTAS. October 4-6, 2024 IOD NORTH AMERICAN INVITATIONAL BERMUDA. Spring 2025 BERMUDA INTERNATIONAL RACE WEEK ...
A boat with a BN of 1.6 or greater is a boat that will be reefed often in offshore cruising. Derek Harvey, "Multihulls for Cruising and Racing", International Marine, Camden, Maine, 1991, states that a BN of 1 is generally accepted as the dividing line between so-called slow and fast multihulls.
IOD Fleet Captain: Vin Marshall. The International One Design is a 10-meter day racer that was created in the mid 1930s. It is the first class to be awarded International Classic Yacht Status by World Sailing. ... In addition to a wonderful racing platform, the boat is widely recognized as one of the more elegant and stately reminders of ...
PART ONE The International One Design was conceived in 1936 by Corny Shields and built by Bjarne Aas in Norway. Fourteen boats were shipped to the Northeast ...
About Shields. Conceived by Cornelius Shields in the 1960's as a fiberglass renewal of his cherished IOD class, this Sparkman and Stephens design remains the finest one-design sailboat ever produced. With active fleets sailing throughout the Northeast, Chesapeake Bay, Lake Michigan and California, Shields are raced by sailors who love to compete.
The IOD (International One Design) sailboat has a rich history dating back to the early 20th century. The design of the IOD class was influenced by the Universal Rule, a rating rule developed in the early 20th century to handicap different designs of racing yachts. The idea was to create a level playing field for…
6-Meter lineage, transformed into a "golden age" one design yacht, The International One Design, (IOD) is the brainchild of Cornelius Shields. Bjarne Aas "International One Design" Specifications: LOA: 33.16′ * LOD: 33.16′ * LWL: 21.42′ * Beam: 6.75′ * Draft: 5.16′ * Ballast: 4,100 lbs * Displacement: 7,100 lbs * Sail Area: 437.82 ft2 * … Read more "Bjarne Aas ...
The result of this fateful alchemic collaboration was the 33-foot International One-Design (IOD) racing sloop, a boat with "lines as clean as a smelt's and each and every line perfect for its ...
This yard is owned and operated by active IOD sailor, Lars Berntsson, who has built seven hulls to the exacting one design specifications of the class. Contact: Phone: 0304-661394 EMail: [email protected]. South Shore Marine. The North American Class builder is Shawn Mulrooney Owner/Operator of South Shore Marine in Chester Nova Scotia.
The new boat measured 21'5" on the water, with a 6'9" beam and draft of 5'4". She had a lead keel of over two tons, and displaced 7120 lb. She carried a lofty rig, with a 45' mast and 426 square feet of sail, only 50' less than a Six Meter. She was beautiful to look at, and promised to be a racer but easy to handle.
He was twice-elected World President of the IOD World Class Association. His granddaughter, Abi Borggaard, competes on the Tulane University intercollegiate sailing team, so the trend continues. The IODs first came to San Francisco in 1953. The most notable IOD skipper from San Francisco was the famous Jake Wosser who won the Worlds, a then ...
The IOD collided with a large, established fleet of Optimist Prams in the U.S. As more and more IODs landed on the shores of the U.S., regattas were scheduled for both Prams and IODs. As late as 1985, separate regattas were held for both boats. Many sailors from the 1970s and 1980s owned two boats, to sail in both types of regattas.
The Bermuda International One Design Fleet is the oldest actively raced fleet in Bermuda, and in 2012 celebrated a history of 75 years of competitive world-class racing. The IOD design has its roots in a Six-Metre yacht named "Saga", built in 1935 for Eldon and Kenneth Trimingham of Bermuda. The first five IODs arrived in Bermuda in 1938.
The l/b ratio for IOD is 4.94. Wide Slim 100% 0 50 100. Compared with other similar sailboats it is slimmer than 100% of all other designs. It seems that the designer has chosen a significantly more speedy hull design. This type of design is also referred to as 'needle'.
Learn more about the fleet and those who sail the boats. View albums of past events, follow upcoming races and track the season's score. Home. Calendar. Scoreboard. Media. Fleet. ... races or any other IOD related topics, feel free to visit us or reach out through any of our communication channels. Location. Almösunds Marina, Tjörn. Phone +46 ...
IOD (International One Design) - World Sailing
The MC Sailing Association originally formed in Shreveport LA, 1971. Since then, the MC class has grown to be one of the top one-design sailboat racing classes in North America. The scow design maximizes speed yet provides unmatched stability. There are more than 113 active fleets nationwide. An original design by the Melges family in 1956, it ...
5-day sailing course on board of a cruising yacht. The main objective of the course is to teach basic sailing terminology, parts and functions, basic sail trim, helm commands, seamanship and safety. Ideal for candidates with little to no previous sailing experience who wish to train to become an active crew member on a power or sailing yacht.
local_florist. 1225 East 6th Street. | Moscow, ID 83843. | Tel: 1-208-882-4534. |. Frequent Questions - Short's Funeral Chapel offers a variety of funeral services, from traditional funerals to competitively priced cremations, serving Moscow, ID and the surrounding communities.
Buying Format. Old Dutch Nickel Lined Solid Copper Moscow Mule Mug 14 Oz. Hammered ODI 428h. Brand New · Old Dutch. $5.00. or Best Offer. $8.30 shipping. Old Dutch Nickel Lined Solid Copper Moscow Mule Mug 16 Oz. Hammered ODI 428h.