16 ft o'day sailboat

Boat Profile

O’Day Day Sailer

A proven performer for 61 years

From Issue   July 2019

T he production of small boats was booming in the 1950s on both sides of the Atlantic, and really took off in the late ’50s with the introduction of fiberglass. Famed designers Uffa Fox and George O’Day teamed up in 1956 to create the O’Day Day Sailer. Fox is credited with introducing the technique of planing to dinghy racing and designed many significant classes of boats, including the International 14. The story goes that Fox wanted a pure racing dinghy but O’Day wanted the small cuddy added to increase appeal to the recreational market in the U.S., so Fox designed the planing hull and O’Day designed the cuddy. The resulting Day Sailer was a 16’9” centerboarder with a displacement of 575 lbs, which makes for a light load to tow behind the family car. The fractional sloop rig includes a generously sized spinnaker for exciting downwind sailing.

The first Day Sailer was sold in 1958 and immediately became popular in the recreational and racing markets. It was later designated as the Day Sailer I as four different models have since been built, with over 10,000 boats hitting the waterways. Day Sailer (DS) models I through III have been built by eight different manufacturers, with the current Day Sailer being a modified DS I with a few DS II attributes, such as the internal foam flotation and cuddy thwart. The original DS models I, II, and III were built from 1957 to 1990 by the O’Day Company in Fall River, Massachusetts. The DS I and modified versions of it were later built by Can-AM Sailcraft, Rebel, Spindrift, Precision, McLaughlin, Sunfish/Laser Inc. The current builder of the DS I+ is the Cape Cod Shipbuilding Company (CCSC) in Wareham, Massachusetts, holder of the exclusive license since 1994. The Day Sailer Class Association owns the molds that are currently used by CCSC.

The long side benches in the cockpit provide uncrowded seating for six. The sole is above the waterline and is self-bailing.

The early DS I can be identified by wooden thwarts, seats, and cockpit sole, a centerboard lever, open cuddy, and a transom deck. The DS II came out in 1971 with built-in foam flotation. The cuddy opening is smaller than the opening on the DS I because it also acts as a thwart, and a thinner transom allows mounting a small outboard motor without the need for a bracket. The Day Sailer I and II are considered class legal for one design racing, but the DS III is not considered race-legal due to higher freeboard on the transom, which was a departure from Fox’s hull design. O’Day built the III from 1985 to 1990, so to race in One Design regattas it is important to buy a DS I or DS II. The current Day Sailer in production is a modified version of the DS I with improved self-rescuing capabilities, two sealed air tanks, and a cuddy flotation tank with a smaller hatch.

The Day Sailer, no matter which model, is a very versatile boat, easy to rig, sail, transport, and store. With the mast down the boat and trailer take up just a few feet more than an average family car, so can be stored in most garages, though the mast may need to be stowed diagonally. At the ramp, the Day Sailer can be rigged in under 30 minutes: step the mast, add the boom, bend on the jib and main, clip the pop-up rudder onto the transom, and sort out the sheets.

Stepping the mast is the biggest challenge. The 23′4″-long racing mast is stepped through the top of the cabin onto the maststep fixed to the floor of the cuddy, and that can be tricky for one person. The mast does not weigh much, but it is helpful to have a helper at the foot of the mast to guide it into the cuddy opening. The good news with this arrangement is that once the mast is stepped, it is secure, and there’s no rush to attach the forestay.

A mast hinge, a popular option, makes raising the mast much easier.

About 75 percent of the new boats are delivered with a hinged mast, eliminating the awkward gymnastics of stabbing the mast through the cuddy. Once the mast is raised and the forward hole on the hinge pinned, securing the forestay to the bow fitting takes the strain off the hinge. Side stays can then be tightened to take out the slack, but no more than hand tight. Stays that are too tight can damage the hull. Tighten the nuts on the turnbuckles and tape over any cotter pins.

There are different sheeting arrangements for the boom. Some boats have sheets attached in the middle of the boom; the sheet on a DS II starts from a traveler on the transom and ends forward on a swivel cam cleat mounted to the centerboard case. The DS II boom also has a spring in the gooseneck that allowed for roller furling— disconnect the sheet, pull the boom aft, and roll the sail onto the boom. A reefing claw has to be added to connect the sheet to the sail-wrapped boom, but this design is not optimum, nor is the wad of rolled-up sail by the boom’s gooseneck. A better arrangement is to add a conventional set of reefpoints to the mainsail. The boom also has a vang to improve sail control.

The 6′ 3″ beam gives the Day Sailer good stability, enough to keep the boat under someone standing on the foredeck.

The jib on the racing version of the DS is a standard affair, attached with hanks onto the forestay and raised with a halyard. Some skippers add a downhaul to lower the jib from the cockpit. Both the main and jib halyards are led aft on the top of the cuddy. The recreational version of the new DS I comes with a roller-furling jib, which we consider essential for sailing dinghies, especially if singlehanding. We have added a roller-furling jib to our DS II along with the mast hinge. We also added the hardware and rigging for a spinnaker, halyard, spinnaker pole, spinnaker pole control lines, sheet blocks, and jam cleats.

T he Day Sailer is a treat to sail; it handles well, tacks with ease, and powers up quickly with its large sail area. The planing hull is responsive to the tiller, and the wide beam makes it stable. The boat will roll quickly but then sets on a tack, holding it with stable and positive helm control. The centerboard can be easily adjusted from amidships.

We sail a Drascombe Lugger and a Sunfish; the Lugger drives like the family sedan and the Sunfish like our Mustang. The Day Sailer handling is closer to that of the Sunfish—when the breeze picks up, the mainsheet needs to be held in the hand and someone should be ready on the jibsheets. The jibsheets run through the coaming on the DS I and through small cars on the DS II. For the highest performance, skippers have added tiller extensions and hiking straps. There is an outhaul on the battened main; racing versions have barber-haulers and travelers added. Pop the spinnaker, and it will scoot along quite nicely in a light breeze.

The Day Sailer carries 100 sq ft in the main, 45 sq ft in the jib and, for sailing off the wind, another 95 sq ft in spinnaker.

The Day Sailer’s 7′ 4″-long cockpit provides plenty of room for three adults, or two adults and two kids. With four adults it gets cozy; there is not much moving around, so whoever is sitting next to the tiller or foredeck needs to know what to do. It is easy to depower the main, reef it, or furl the jib as needed.

The cuddy is spacious for storing picnic or camping gear, and it affords a space equivalent to a two-person backpacker tent for sleeping aboard for overnight cruising. Adding a topping lift makes the boom nice ridgepole for a boom tent; there’s plenty of room to sleep in the uncluttered cockpit. The Day Sailer has completed many endurance cruising events, such as the Texas 200, Florida 120, and the Everglades Challenge.

A small kicker can be added for auxiliary power. We have used both an electric trolling motor and gas outboard, with best results coming from a 2-1/2-hp four-stroke that pushed push the boat to 6 knots at one-third throttle. The DS I will require a bracket to support and outboard; the DS II transom is thin and sturdy enough for a direct mount. If we’re not going far from home, we occasionally skip the outboard and carry a paddle; with her low coaming we have paddled her a bit, even backward over the transom.

The transom of the Day Sailer II will accommodate an outboard for auxiliary power. The Day Sailer I will require a bracket.

D ay Sailers are easy to find and inexpensive, considering their capabilities. If you come across one, there are few important things to check. Make sure the centerboard moves in the trunk, see that the forestay tang and bow seam are not pulled up, inspect the cuddy deck for noticeable depression which would indicate failure of the maststep under the cuddy floor, and if it is a DS II look inside the flotation compartments. Rinse her off and get her ready to sail. There is a great Day Sailer Association with a web-based forum, and excellent parts availability.

Audrey and Kent Lewis enjoy time with CYANE, along with their small fleet of kayaks, canoe, sailboats, and lapstrake runabout. They blog about their adventures on smallboatrestoration.blogspot.com

Day Sailer Particulars

Length/16′ 9″

Draft, board up/9″

Draft, board down/3′ 9″

Displacement/575 lbs

Main/100 sq ft

Jib/45 sq ft

Spinnaker/96 sq ft

The Day Sailer is built by Cape Cod Shipbuilding Company . Prices start at $18,335 (less sails). For more information about the Day Sailer Class, visit the Day Sailer Association .

Is there a boat you’d like to know more about? Have you built one that you think other Small Boats Monthly readers would enjoy? Please email us!

Share this article

Join The Conversation

We welcome your comments about this article. If you’d like to include a photo or a video with your comment, please email the file or link.

Comments (35)

Great article Kent! I have a sister to your boat, right down to the racing mast and blue hull!! But since we’re moving to the Pacific NW, I’m about to sell it. I’m limiting myself to only 3 boats for the move (and it’s a hard sorting out!!!!). Great write-up about a fantastic boat! Thanks! Charlie

My father was George O’Day. It is nice to know the basic design that my Dad helped create is still vibrant 60 years later. I always find it interesting since Dad was a pure racing sailor that he designed a boat and saw the importance of appealing to the recreational aspect of sailing. He wanted to open the door to the bigger audience to share his passion of sailing.

I sailed with your father on a Hobie 16 at a Red Cross small craft instructor program. So much fun sailing with a legend.

Charlie we know it’s hard, the Day Sailer is such a timeless boat. If she has to change skippers, find her a good one.

Miss Beth, so wonderful to hear from a family member, it must have been quite an adventure to grow up around boating and racing. That Day Sailer hull was Cap’n Jack’s favorite, we enjoyed looking at it. Thank you for the insight into your family’s history.

Cheers, Skipper and Clark

I’ve had an O’Day for years, my first sailboat. I love sailing her around our little lake.

This boat is the best for a small family. In Brazil it’s a great option.

O’Day DS was my first brand-new boat. I was a “veteran”of maybe six months sailing in the late 1960s and she taught me to love sailing.

Great boat design. I’ve sailed different ones on and off over the years. Still a favorite.

Beth, your father made great boats as my father still has an O’Day 20 he bought new in ’76 and it’s still like new and a great sailing boat!

I recently bought a 1966 model after downsizing from a Viking 28. My father owned a Rhodes 19 and we sailed that boat for years on the western end of Lake Ontario. The design was similar, so the transition to the 16 was easy. I love the boat because even in high winds I can make a simple adjustment to the main with reef points. Solo sailing is fun and safe. I can see why so many were sold.

Hello, I just bought O’day sailboat. I do believe from what I’ve been reading that it’s a Daysailer 1. I was told this boat has never been registered and never had a kicker motor on it, I can’t find the metal tag on the transom but I see the two rivet holes where it should have been. Is there any other place on this boat to find the serial number? I would like to put a kicker on it and register it and, if not, is there a way to register this boat? Thank you for helping

The requirements to register a small boat that has not been registered before is different for each state. In NY, a boat is registered through the DMV. HIN numbers are placed on the right side of the transom. If you do not have one your boat was made prior to 1972.

Thank you for the reply, I’m working on getting a HIN number now.

Check with O’Day. Some manufacturers hide a second HIN onboard. Worth a shot.

My boat has a plate on the inside toward the front of the boat. On the bulkhead (might not be the right term) behind the mast. You’ll have to crawl into the cubby to see it. It’s a little plate 2″ x 4″ and shows Hull no. and Class no. The paperwork I have says the boat was made in 1967. Does anyone know the difference between Hull number and Class number?

Can anyone give me today’s value of a 1960 O’Day Day Sailer, #333, with a small motor that goes on the mount with sails that all sit on a Dilly trailer? It has all the original woodwork that my husband redid. It does not have a spinnaker but has the jib and main and a Proctor mast.

My daughter and I are looking for an older (less expensive) sailboat. Not sure where your at , we are South of Boston. The O’Day is our first choice. If you are going sell, please reply to this comment. Thanks

[I’ll connect sellers to John. Ed.]

16′ O’Day Day Sailor with trailer and motor

2013 DS for sale in Sharon,MA. needs work on floatation tanks

At 30 years old, I just bought my first sailboat which is a 1965 DS I. The boat has sat for a few years and she needed a good power-washing plus painting of the hull and inside the cubby and several new lines. I’m completely inexperienced with sailing (plenty of time cleaning boats, though) and couldn’t be happier to learn on such a beautiful vessel. Thanks for this article! It’s great to get some background info. Plus, plenty of words to highlight as I expand my boating vocab.

Day Sailers are easy to find? I guess you know where to look (certainly no offers in Craigslist). I have not been lucky enough to come across a good one that is 10 to 20 years old. I live in Massachusetts. Would you mind sharing where to look for one?

I have an O’Day day sailer 16.5 ‘ up for the taking. Our family had years of good times sailing and camping with It. Great family boat. Wooden seats and rails. Needs some work. In central Massachusetts

I am assuming you have gotten rid of your O’Day day sailer – if not, I may be interested. I’m new to sailing at 57 years young! I just took lessons at KYC here in Blue Hill, ME and am looking for a great starter boat that I can learn in and have fun on the bay.

Thanks, Kelly

Actually, I just bought a 1989 DS2 from Craigslist, on trailer, for $300. It needs only minor work and a lot of cleaning. I hope to float it Saturday to see if it sinks like a rock (I know it has flotation), and will need glass work, but I could see nothing amiss while on the trailer.

So, never say never.

Hi Laranja, I just read your comment about trying to find a used O’Day Day Sailer. I live in Wareham where Cape Cod Shipbuilding is located, they are the current builders of the Day Sailer. They usually have used boats available. I have a 1971 DS, a wonderful boat.

I have a 2013 DS for sale in Sharon,MA. needs work on floatation tanks

Fantastic article

Interested in purchasing a fine example that was actively sailed

I agree with the many positive comments above. Great article! I was a longtime owner of an O’Day Widgeon (14′), and after many boat-less years I’m pleased to have purchased a 1984 O’Day Daysailer II just last week. It’s in good condition, and after sourcing a few needed part, I’ll enjoy it on lakes here in Georgia. Thanks for the great article, which has served as an orientation of sorts for me as to what to expect when I launch her for her maiden voyage under my ownership. A long-time marketing and sales executive, I’m naming her SAILS CALL!

I just got a DaySailer, thought it was a 67 DS1 but the transom is thick with a box on the port side by the transom so not sure now DSII?

I just today bought and brought home to MA a 1966 O’Day Day Sailer (as shown on the registration from NH), and it has a thick transom with lidded box on the port side. Also has a wide cuddly opening and wooden cowling and thwarts as described above for a DSI.

We’re down sizing from a 53′ Pearson to an O’Day 18 that someone offered us. I have no qualms about the sailing, but the temperature of the water here (Massachusetts to Connecticut) worries me very much, after a lifetime in the tropics. Are these dry boats when sailed conservatively?

I have a 2013 Cape Cod built DS for sale in MA. Needs some work on floatation tanks.

I just sold our Venturer 22 and picked up (rescued) an O’Day 16 DS. A couple weeks in the shop and it looks ready to sail. One question: the roller reefed main (boom) does not “lock in.” I suppose I could jiffy reef it but does anyone have experience with the roller reefing boom? Am I missing a part (the claw) or do I just not get it.

I want to buy an O’Day sail 17′

We have a 1976, 17′ foot O’Day DSll (?) on trailer that we are transferring to another family member. We are trying to figure out the best way to get it from Oregon to New Hampshire. Any ideas out there?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Stay On Course

More From This Issue

From The Editor

Suitable for Framing

here’s an interesting exhibition of art at the Georgetown Historical Society in Georgetown, Maine. Some of the pieces on display are an unusual pairing of abstract painting and wooden boat...

Whitehall Tender

Shenandoah Whitehall

The construction went quickly. Every major project I’ve ever begun has a hidden “gumption trap”—a difficult and unrewarding challenge that sucks the will to persist right out of me. This…

The Day Sailer, no matter which model, is a very versatile boat, easy to rig, sail, transport, and store. With the mast down the boat and trailer take up just…

Dallying Downeast

We’d started at Deer Isle, where we had lived and worked for 14 years, and we planned to paddle a big figure-eight: first down to Portland and back, and then…

A Cartop Water Tank

Bringing the pressure up to 40 psi is sufficient to propel the remaining 4 gallons of water out of the tank. The nozzle I have on the hose will shoot…

Product Reviews

DeWalt’s Benchtop Planer

We researched benchtop planers and decided the DeWalt DW734 would meet our requirements. Its 12-½” wide bed could handle the 12”-wide garboard that we needed to replace, and its 6”…

Quickloader Retractable Ratchet Straps

The QL15 model has two black, rubber-coated metal S-hooks, one of which is on a 9-1/2” piece of 1” polyester webbing, and the other is at the end is a…

Reader Built Boats

DREAM WEAVER

Neither Claudia nor Jacob came into that class with much experience in marine design beyond scanning online videos and blogs. For guidance on construction they studied Nick Schade’s The Strip-Built…

More Boat Profile

Super Sailfish

In 1946, Alex Bryan and Cortlandt Heyniger had combined bits of their first names to create Alcort, Inc., and the first sailboat that they designed, in 1947, was the 11’7”…

Shrimper 19

British builder Cornish Crabbers says the Shrimper 19 was the best seller in its line of sailboats ranging from 17′ to 30′ for decades, though now the roomier and much…

AdvancedFrame Sport Kayak

I kept coming back to the sweetly designed 10′ 6″ AdvancedFrame Sport Special Edition from Advanced Elements. With its semi-enclosed cockpit, moderate 32″ beam, and enthusiastic reviews, it seemed a…

Oughtred’s Auk

The Auk is an Iain Oughtred design that dates back to 1984. He was “just looking at traditional boats and trying to produce an ideal version of an 8′ tender.”…

Subscribe Today!

Become a subscriber today and you’ll recieve a new issue every month plus unlimited access to our full archive of backlogged issues.

Already a subscriber?   Sign In

Subscribe For Full Access

Flipbooks are available to paid subscribers only. Subscribe now or log in for access.

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

Is this 16' Daysailer worth the time?

• Thread starter LandLockedNewf
• Start date Aug 7, 2013
• Oday Owner Forums
• Day Sailers

LandLockedNewf

Hi All, I was recently given a 16' O'Day Daysailer. My brother's in-laws bought it and the trailer about 10 years ago and it's been in storage ever since. As the pictures show, it's in desperate need of some fibreglass and wood work (and soap!). The hull number is 1985, class 249. As far as I can tell I've got most of the major bits and pieces. The mast, boom, daggerboard and rudder. I've got the sails but they were just stored in a garbage bag, and I've yet to give those a good inspection. Structurally, the hull looks to be in pretty good shape. There's some stress cracks around the opening to the cuddy. There's going to be some fibreglass work to do. I think the 'gelcoat' (I'm not even sure if it's gel coat or just multiple layers of paint) on the hull will have to me all sanded down and new gel coat applied. All the interior wood will have to be redone. I read that extra floatation was added to later models of these boats to make them easier to right after capsizing. I'm a bit concerned when I look at most pictures of Daysailers and see the fibreglass bench seats. Is there additional floatation under there and should that be a concern to me. If I wanted to get a little outboard motor to put on this, any suggestions as to the size and type of motor. I'm wondering, when you guys look at this, what would be your main concerns or recommendations? Do you think it's worth the time? I'm in no big rush to get it on the water, I'm approaching it more as a nice project to keep me out of the wife's hair! Although I've grown up around boats, I've never sailed but the idea really appeals to me... especially after watching some of the YouYube videos people have posted. It just looks like too much fun. Any input would be appreciated. Thanks  

Attachments

Looks like your finished project will be just like the axe I have that belonged to Abraham Lincoln. Except for 2 new heads and 3 new handles it's the same axe!  

First of all, the fiberglass will be fine. Nearly indestructible. The gelcoat might be a different story, but polyurethane paint can fix that. You'll be looking at a lot of wood work, which is cool, because you can upgrade all that ugly painted plywood to something nicer, maybe sapele. And the coamings can be brand new mahogany, with beautiful brightwork. You're probably going to need new sails, but there are plenty of Daysailers out there, so sails are probably reasonable, and about $1100. As for a motor, anything gas will push that along fine. You might want to go with the 2.5hp Lehr for propane. Or the little Honda 2hp air cooled, if you don't mind that it's noisy. Or the 2.5hp 4stroke Tohatsu/Nissan/Mercury. Or get really spendy with a Torqeedo. They are popping up all around our marina, and folks seem to love them. Have even spotted Troqeedos on a Precsion 21 and Com-Pac 19. If you want to restore a boat, go for it. Just expect it to be time consuming and expensive. But time-wise, you've got the right idea: you don't much care when you've got it finished, so you can take all kinds of time to do it right. Brian  

What jimmyb said. I remember talking to a kayaking friend once, who used to do sailboat reviews in Wooden Boat magazine. I told him I wanted to build a sailboat (at the time, I was very enamored of the Stevenson Super Skipjack.) He asked me, "Do you want to build a boat, or do you want to sail?" HIs reasoning is that if you're trying to build a boat to get into sailing cheap, then you should go find an inexpensive used boat with minimal needs (as much as "inexpensive" and "minimal needs" have an inverse relationship...) and then go sailing. But if you're into building boats more than sailing, then, build a boat. As jimmyb points out, if you're into restoring boats, enjoy yourself, it can be a very rewarding experience. But if you're into sailing, pass on that Daysailer. Brian  

Sunbird22358

Well, the only thing I'll add at this time is that Hull# 1985 CLass# 249 would be a 1959 or maybe 1960 DAY SAILER. In other words, built during the first or second year of production....... fixed up, she is worth something! Fixed only enough to go sailing.... she is still priceless to you. If you were to lose interest....... an ad on the Day Sailer Class Web Site will bring many inquiries.... www.daysailer.org The early boats had wooden seats and you may notice that the sides of the cockpit extend to the hull bottom, unlike later boats.... that area contains the foam and was meant to trap air as well for flotation, one concern might be the hatch cut into the section under the after deck, but that could be resealed or maybe a watertight hatch fitted. I have added a few pictures of 1958-9 models to help explain what I'm refering to. The seats on the later DS I boats did have flotation foam under them, but they did not have the foam under the side decks like the 1958-9 models. The Day Sailer II model (introduced 1971) has the closeable cuddy and molded-in cockpit that is "self-bailing" these changes were made to allow much easier self-rescue from a capsize, the DS I may be harder to recover fro ma capsize, but that would not stop me from owning one! There is plenty of flotation in even the early DS I to float the boat and ocupants, although check to be sure it isn't waterlogged.... if so, replacing hte foam is a good idea (just not easy to do!) Installing inspection ports that can be sealed to allow access to those under-deck areas wil lhelp to dry out any dampness. The best way to recover from a capsize is to not go over in the first place. When sailing the DS I, it is a good idea to only use the mainsail if it is windy, the boat will sail fine without the jib (just raise the centerboard a bit to balance the sail area to the postion of hte CB), also; ALWAYS hold the mainsheet in your hand while sailing! Yo ucan use a camcleat to hold the tension, but keep the sheet in hand ALWAYS... that way you can let the sail out quickly if a gust hits and prevent a capsize. Sitting on the windward (high) side while sailing keeps these boats up and a tiller extension is a great help.  

Jack's Boat, Old & Retored It's definitely worth it if you have the time.We restored an Oday wildfire about the same size, but it takes some time & ingenuity.:dance:  

is it sailable right now? are all the parts and pieces there, rudder, rigging and sails? sailing a small boat is a lot of fun, and if you can work on it a bit at a time while you get some time sailing with it also, then its worth it. but if you have to spend $1000-2000 and a years labor on it before its usable, then NO..... 'cuz you can buy a fixer upper about that size that is ready to sail for that price.... and never underestimate the cost that it will require to get the boat in the condition you would like it to be, or the time, because even small boats are voraciously hungry for both...  

tricyclerob

"and never underestimate the cost that it will require to get the boat in the condition you would like it to be, or the time, because even small boats are voraciously hungry for both..."[/QUOTE] Truer words were never spoken. That being said, you can spend a lot making her as close to "perfect" as possible, or spend the minumum to make it useable and safe. Many parts of the "safe" you may have to do the same things regardless of the condition. The big thing is, You have to enjoy the process of resurection. I spent waaay too much restoring a 1970 O'Day Mariner, but I fell in love with her "at first sight" and really enjoyed doing the work. So to me it was worth it but I can't stress you have to "enjoy the work" - too much. Before and after. robj p.s. How do you make a $600 boat worth $3000? Spend $6000 on it!  

"Is it worth the time?" I just bought a $600 1973 29-foot sailboat. Paid $1,000 to have it hauled to my home. The hull and deck are solid. The hardware and rigging were recent and good quality. The sails were still crisp. It came with quality stands. The inside needs to be redone. In fact, the previous owner started redoing it and had most things disassembled before sadly dying. Since it cannot be sailed at the moment, the price was very low. I enjoy the maintenance and refurbishing portion of ownership as much as I enjoy sailing. A friend looked at the boat and said it needs "a lot of work". She was looking at the interior which in my opinion can remain very spartan for a long time as long as the hull, deck, and rigging are functional and to spec. But her comment reflected her concept of what was important. Many people will discourage you if the boat does not look sailable. You get to choose whether you want to make it safe and sailable (not too costly if the hull, deck, and rigging are in decent shape) or whether you want to do a full restoration (very expensive often with little payback). From your pictures, you will probably need to replace the wooden benches. It is not a difficult task if you have any woodworking and epoxy/fiberglass skills. Styrofoam blocks can be used for added floatation under the seats. Attach the blocks to the underside of the seats, not the floor of the cockpit so they won't absorb water. Do things in small steps. Don't try to redesign the boat but do make incremental changes that make sense since technology and materials have changed since this boat was designed. I think it would make a fun project and have some "historical" value since it is an early hull number.  

First, I'd point the trailer into the wind, rig the mast and sails and confirm that everything was there and mechanically worked (rudder and center board solid). If so, hose it out, spend 15 minutes cobbling together some sort of seat, and I would take it to a local safe spot on a light air day and try her out near shore. Then, if I liked it at all, I go after tier 1 projects. New seats. Sail repairs and a light cleaning (some stains are permanent and removing them can destroy an old sail). Any repairs to the rigging and such that became evident. Let a sailor look at it and tell you what matters for safety; there are many things that would be nice but 90% are cosmetic. Finally, if the above is all fun and a second sail is good, figure out the winter projects. Beats watching TV. Worry about a motor in the spring or in a year. Sail a place where it is not needed (there will be other no-motor trailer boats. I sailed my first boat (16') for 8 years with no motor.  

what thinwater said  

Like Thinwater suggested, rig the mast, sure all the parts are there, same for rudder, etc.. New lines will probably be needed as the old ones, are well, old. You don't want to get out somewhere and find out the lines looked good but snapped with strain. Same with the rigging which can be a safety issue. You really don't want the mast coming down on your head. Check the stays for "meat-hooks", strands of the wire sticking out. If you find that, the rigging really should be replaced. D+R Marine has tons of parts for O'Days with reasonable prices, and Rudy is a great guy to deal with. http://www.drmarine.com It looks like the floors are plenty good enough for patterns, so your cost there would be a sheet of plywood and some paint, as long as the stringers are solid enough to screw to. Same for the seats. If you are not looking to "restore", nothing says you couldn't use plwood with some limber holes for drainage for the seats as well. That, and a gallon of paint would go a long way. [Google "house paint for boats" if money is an issue] As far as the appearence of the hull, if it's been painted I would not worry about trying to remove old paint and re-gelcoating, just sand, primer and repaint. If it's not been painted, it's pretty amazing how well old gelcoat can be restored. I think way too many jump right to paint when there's plenty of life left in the gelcoat. There's a bunch of discussions of this in the "Ask All Sailors" forum. If you do the minimal, seats, floor, paint and general clean-up, and decide it's not for you, it would make her much more sale-able so you would probably get most of your money back. It's looks like a very do-able project to me. robj  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

10 Best Small Sailboats (Under 20 Feet)

Last Updated by

Daniel Wade

December 28, 2023

Compact, easy to trailer, simple to rig, easy to maintain and manage, and affordable, the best small boats all have one thing in common: they offer loads of fun while out there on the water.

So whether you're on a budget or just looking for something that can offer ultimate daytime rides without compromising on safety, aesthetic sensibilities, alternate propulsion, and speed, the best small sailboats under 20 feet should be the only way to go.

Let's be brutally honest here; not everyone needs a 30-foot sailboat to go sailing. They come with lots of features such as electronics, entertainment, refrigeration, bunks, a galley, and even a head. But do you really need all these features to go sailing? We don't think so.

All you need to go sailing is a hull, a mast, rudder, and, of course, a sail. And whether you refer to them as daysailers, trailerable sailboats , a weekender sailboat, or pocket cruisers, there's no better way to enjoy the thrills of coastal sailing than on small sailboats.

There are a wide range of small boats measuring less than 20 feet available in the market. These are hot products in the market given that they offer immense thrills out on the sea without the commitment required to cruise on a 30-footer. A small sailboat will not only give you the feel of every breeze but will also give you the chance to instantly sense every change in trim.

In this article, we'll highlight 10 best small sailboats under 20 feet . Most models in this list are time-tested, easy to rig, simple to sail, extremely fun, and perfect either for solo sailing or for sailing with friends and family. So if you've been looking for a list of some of the best small sailboats , you've come to the right place.

So without further ado, let's roll on.

Table of contents

{{boat-info="/boats/hunter-15"}}

The Marlow-Hunter 15 is not only easy to own since it's one of the most affordable small sailboats but also lots of fun to sail. This is a safe and versatile sailboat for everyone. Whether you're sailing with your family or as a greenhorn, you'll love the Hunter 15 thanks to its raised boom, high freeboard, and sturdy FRP construction.

With high sides, a comfortable wide beam, a contoured self-bailing cockpit, and fiberglass construction, the Hunter 15 is certainly designed with the novice sailor in mind. This is why you can do a lot with this boat without falling out, breaking it, or capsizing. Its contoured self-baiting cockpit will enable you to find a fast exit while its wide beam will keep it steady and stable no matter what jibes or weight shifts happen along the way.

This is a small sailboat that can hold up to four people. It's designed to give you a confident feeling and peace of mind even when sailing with kids. It's easy to trailer, easy to rig, and easy to launch. With a price tag of about $10k, the Hunter 15 is a fun, affordable, and versatile boat that is perfect for both seasoned sailors and novices. It's a low-maintenance sailboat that can be great for teaching kids a thing or two about sailing.

Catalina 16.5

{{boat-info="/boats/catalina-16-5"}}

Catalina Yachts are synonymous with bigger boats but they have some great and smaller boats too such as Catalina 16.5. This is one of the best small sailboats that are ideal for family outings given that it has a big and roomy cockpit, as well as a large storage locker. Designed with a hand-laminated fiberglass sloop, the Catalina 16.5 is versatile and is available in two designs: the centerboard model and the keel model.

The centerboard model is designed with a powerful sailplane that remains balanced as a result of the fiberglass centerboard, the stable hull form, and the rudder. It also comes with a tiller extension, adjustable hiking straps, and adjustable overhaul. It's important to note that these are standard equipment in the two models.

As far as the keel model is concerned, this is designed with a high aspect keel as the cast lead and is attached with stainless steel keel bolts, which makes this model perfect for mooring or docking whenever it's not in use. In essence, the centerboard model is perfect if you'll store it in a trailer while the keel model can remain at the dock.

All in all, the Catalina 16.5 is one of the best small sailboats that you can get your hands on for as low as $10,000. This is certainly a great example of exactly what a daysailer should be.

{{boat-info="/boats/hobie-16"}}

There's no list of small, trailerable, and fun sailboats that can be complete without the inclusion of the classic Hobie 16. This is a durable design that has been around and diligently graced various waters across the globe since its debut way back in 1969 in Southern California. In addition to being durable, the Hobie 16 is trailerable, great for speed, weighs only 320 pounds, great for four people, and more importantly, offers absolute fun.

With a remarkable figure of over 100,000 launched since its debut, it's easy to see that the Hobie 16 is highly popular. Part of this popularity comes from its asymmetric fiberglass-and-foam sandwiched hulls that include kick-up rudders. This is a great feature that allows it to sail up to the beach.

For about $12,000, the Hobie 16 will provide you with endless fun throughout the summer. It's equipped with a spinnaker, trailer, and douse kit. This is a high-speed sailboat that has a large trampoline to offer lots of space not just for your feet but also to hand off the double trapezes.

Montgomery 17

{{boat-info="/boats/montgomery-17"}}

Popularly known as the M-17, The Montgomery 17 was designed by Lyle C. Hess in conjunction with Jerry Montgomery in Ontario, California for Montgomery Boats. Designed either with keel or centerboard models, the M-17 is more stable than most boats of her size. This boat is small enough to be trailered but also capable of doing moderate offshore passages.

This small sailboat is designed with a masthead and toe rail that can fit most foresails. It also has enough space for two thanks to its cuddly cabin, which offers a sitting headroom, a portable toilet, a pair of bunks, a DC power, and optional shore, and a proper amount of storage. That's not all; you can easily raise the deck-stepped mast using a four-part tackle.

In terms of performance, the M-17 is one of the giant-killers out there. This is a small sailboat that will excel in the extremes and make its way past larger boats such as the Catalina 22. It glides along beautifully and is a dog in light air, though it won't sail against a 25-knot wind, which can be frustrating. Other than that, the Montgomery 17 is a great small sailboat that can be yours for about $14,000.

Norseboat 17.5

{{boat-info="/boats/norseboat-17-5"}}

As a versatile daysailer, Norseboat 17.5 follows a simple concept of seaworthiness and high-performance. This small sailboat perfectly combines both contemporary construction and traditional aesthetics. Imagine a sailboat that calls itself the "Swiss Army Knife of Boats!" Well, this is a boat that can sail and row equally well.

Whether you're stepping down from a larger cruiser or stepping up from a sea kayak, the unique Norseboat 17.5 is balanced, attractive, and salty. It has curvaceous wishbone gaff, it is saucy, and has a stubby bow-sprit that makes it attractive to the eyes. In addition to her beauty, the Norseboat 17.5 offers an energy-pinching challenge, is self-sufficient, and offers more than what you're used to.

This is a small, lightweight, low-maintenance sailboat that offers a ticket to both sailing and rowing adventures all at the same time. At about 400 pounds, it's very portable and highly convenient. Its mainsails may look small but you'll be surprised at how the boat is responsive to it. With a $12,500 price tag, this is a good small sailboat that offers you the versatility to either row or sail.

{{boat-info="/boats/sage-marine-sage-17"}}

If you've been looking for a pocket cruiser that inspires confidence, especially in shoal water, look no further than the Sage 17. Designed by Jerry Montgomery in 2009, the Sage 17 is stable and should heel to 10 degrees while stiffening up. And because you want to feel secure while sailing, stability is an integral feature of the Sage 17.

This is a sailboat that will remain solid and stable no matter which part of the boat you stand on. Its cabin roof and the balsa-cored carbon-fiber deck are so strong that the mast doesn't require any form of compression post. The self-draining cockpit is long enough and capable of sleeping at 6 feet 6 inches.

The Sage 17 may be expensive at $25k but is a true sea warrior that's worth look at. This is a boat that will not only serve you right but will also turn heads at the marina.    

{{boat-info="/boats/laserperformance-laser-sb3"}}

Having been chosen as the overall boat of the year for 2008 by the Sailing World Magazine, the Laser SB3 is one of the coolest boats you'll ever encounter. When sailing upwind, this boat will lock into the groove while its absolute simplicity is legendary. In terms of downwind sailing, having this boat will be a dream come true while it remains incredibly stable even at extraordinary speed.

Since its debut in 2004, the Laser SB3 has surged in terms of popularity thanks to the fact that it's designed to put all the controls at your fingertips. In addition to a lightweight mast, its T- bulb keel can be hauled and launched painlessly. For about $18,000, the Laser SB3 ushers you into the world of sports sailing and what it feels to own and use a sports boat.

{{boat-info="/boats/fareast-18"}}

As a manufacturer, Fareast is a Chinese boat manufacturer that has been around for less than two decades. But even with that, the Fareast 18 remains a very capable cruiser-racer that will take your sailing to the next level. In addition to its good looks, this boat comes with a retractable keel with ballast bulb, a powerful rig, and an enclosed cabin.

Its narrow design with a closed stern may be rare in sailboats of this size, but that's not a problem for the Fareast 18. This design not only emphasizes speed but also makes it a lot easier to maintain this boat. Perfect for about 6 people, this boat punches above its weight. It's, however, designed to be rigged and launched by one person.

This is a relatively affordable boat. It's agile, safe, well-thought-out, well built, and very sporty.

{{boat-info="/boats/chuck-paine-paine-14"}}

If you're in the market looking for a small sailboat that offers contemporary performance with classic beauty, the Paine 14 should be your ideal option. Named after its famous designer, Chuck Paine, this boat is intentionally designed after the classic Herreshoff 12.5 both in terms of dimensions and features.

This is a lightweight design that brings forth modern fin keel and spade rudder, which makes it agile, stable, and faster. The Paine 14 is built using cold-molded wood or west epoxy. It has varnished gunnels and transoms to give it an old-time charm. To make it somehow modern, this boat is designed with a carbon mast and a modern way to attach sails so that it's ready to sail in minutes.

You can rest easy knowing that the Paine 14 will not only serve you well but will turn heads while out there.

{{boat-info="/boats/wd-schock-lido-14"}}

Many sailors will attest that their first sailing outing was in a Lido 14. This is a classic sailboat that has been around for over four decades and still proves to be a perfect match to modern small boats, especially for those still learning the ropes of sailing.

With seating for six people, the Lido 14 can be perfect for solo sailing , single-handed sailing, or if you're planning for shorthanded sailing. While new Lido 14 boats are no longer available, go for a functional used Lido 14 and you'll never regret this decision. It will serve you well and your kids will probably fall in love with sailing if Lido 14 becomes their main vessel during weekends or long summer holidays.

Bottom Line

There you have it; these are some of the best small sailboats you can go for. While there are endless small sailboats in the market, the above-described sailboat will serve you right and make you enjoy the wind.

Choose the perfect sailboat, invest in it, and go out there and have some good fun!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Sailboats 16 Ft

Sailboats 16 Ft Boats for sale

ODAY DAYSAILER 16 FT.

Bethany Beach, Delaware

Model DAYSAILER 3

Category Daysailer Sailboats

Length 16.0

Posted Over 1 Month

ODAY DAYSAILER 3, 16 FT., 8 FT. COCKPIT, SWING KEEL, VERY GOOD CONDITION, EASY LOAD TRAILER, VERY GOOD CONDITION, BOAT IS LOCATED IN REHOBOTH BEACH, DE. SOLD AS IS, NO RETURNS, ANY QUESTIONS CALL 302-537-2141 OR 201-745-5934

1980 Gulfstar 50 ft Ketch

Miami, Florida

Make Gulfstar

Model 50 Ft Ketch

Category Sailboats

1980 Gulfstar 50 ft Ketch Vessel 1980 Gulfstar 50 Ketch - Grace Engine/Fuel Type: Single / diesel Hull Material: Fiberglass Located At: Riviera Beach City Marina, FL 33404 Slip: N54 Price: $225,000 Dimensions LOA: 50 ft Beam: 13 ft 10 in LWL: 39 ft 8 in Maximum Draft: 5 ft 10 in Bridge Clearance: 57 ft Displacement: 35000 lbs Ballast: 12000 lbs Headroom: 6 ft 6 in Engine Engine Power: 100 HP Engine Brand: Yanmar Year Built: 2007 Engine Model: 4JH3HTE Engine Type: Inboard Engine/Fuel Type: Diesel Engine Hours: Less than 500hrs Propeller: 3 blade AutoProp propeller, lubed 9/2016 Drive Type: Direct Drive Transmission: New ZF 25M 9/2016 Tanks Fresh Water Tanks: 1 Fiberglass 220 Gallons Fuel Tanks: 1 Fiberglass 70 Gallons Fuel Tanks: 1 Fiberglass 60 Gallons Holding Tanks: 1 Plastic 10 Gallons Accommodations Number of single berths: 6 Number of double berths: 2 Number of cabins: 3 Number of heads: 2 Seating Capacity: 16 Electronics Raymarine Radar Raymarine Chart Plotter w/Navionics chart card Simrad Depth Sounder Simrad Knot Meter Simrad Wind Indicator and Masthead Sitex GPS CPT Auto Pilot Uniden VHF Ritchie Binnacle Compass Digital TV Antenna Long Range Bullet Wifi Radio Antenna Electrical System Blue Sea 12 Volt DC and 120 Volt AC 2 Bus Panel PN 8086 GoPower 3000 Watt Pure Sine Wave Inverter GoPower Remote Panel for 3000 Watt Inverter GoPower 75 Amp Converter/Charger 1 Shore Power to Inverter Selector Switch 3 Odyssey PC1800-FT 225 AHR AGM batteries 2 100 Watt Folding Solar Panels 1 30 Amp Solar Controller 1 Remote Timer for Refrigeration Control DC LED Lighting Throughout w/dimmers DC LED Lighting in cabinets and lockers 2 50' 30 Amp 120 Volt shore cords 1 50 Amp 240 Volt AC to 2 30 Amp 120 Volt AC splitter All electrical systems re-wired 2015 Propane safety shut-off switch in galley Hull Solid GPR hull Awlgripped white 1999 Keel: Cut-away cruising keel Cruising Speed: 7 knots Maximum Speed: 11 knots Deck Equipment KiwiGrip Non-Skid Beige decks 2015 Ideal Vertical Windlass with Wildc

1997 BENETEAU OCEANIS CC 40 FT.

New Rochelle, New York

Make BENETEAU

Model OCEANIS CC 40 FT

Length 40.0

1997 BENETEAU OCEANIS CC 40 FT.Specs Designer: Groupe Finot - Armel Briand Keel: Bulb Hull Shape: Monohull Dimensions Beam: 12 ft 9 in LWL: 36 ft 9 in Maximum Draft: 5 ft 6 in Displacement: 18740 lbs Ballast: 5300 lbs Headroom: 6 ft 3 in Dry Weight: 18740 lbs Engines Total Power: 50 HP Engine 1: Engine Brand: Yanmar Year Built: 1997 Engine Model: Yanmar Engine Type: Inboard Engine/Fuel Type: Diesel Engine Power: 50 HP Perfect cruising boat Full cockpit enclosure 5 KW NextGen generator with sound shield (super quiet) 2 heads 2 air condition units Main / Forward and Aft Cabin New cockpit cushions Algae X fuel polisher Custom made bunk beds Xantrex Link Pro Battery Monitor Xantrex 40 Smart Battery Charger Fresh Water Tanks: (132 Gallons) Fuel Tanks: (53 Gallons) Flex O Fold Bronze folding prop Asymmetrical Spinnaker and Sock TV / Cd player Digital Fridge / Freezer Thermostat VacuFlush Toilet 35lbs. CQR and 33 Bruce anchors and rope chain Simpson Lawrence chain / rope windless 2 8D Gel Batteries and Separate Starting Battery Back up High Capacity Bilge Pump PHI /PSS Shaft Seal Accommodations Number of single berths: 6 Manufacturer Provided Description: The specification for the Oceanis 40CC: the design of an ideal long-distance cruising yacht for a couple, but with the capability of accommodating four or five people in the greatest comfort. Being on board a powerful, reliable boat that also has high performance is an essential part of the pleasure of cruising. The Oceanis 40CC's hull is remarkable for its long waterline, big volumes and efficient wing-bulb keel. As far as her construction is concerned, there are no compromises: the structural inner mounding, glued and laminated to the hull, distributes any stresses from the rigging and keel. This technology combines reliability and strength and also provides perfectly finished locker interiors that are easy to maintain. One of the principal advantages of a central cockpit is the incomparable safety derived from the height of the cockpit, which is surrounded on all sides. There is a step of the coaming on the Oceanis 40CC to make it easier to get up the two teak-covered bench seats in the cockpit. There is a wheel mounted pedestal in the middle of the cockpit. Genoa and mainsail halyards and the lines for the two furlers are brought back onto powerful stoppers that free the halyard winch, whenever necessary. All handling lines are to hand. The Oceanis 40CC's deck is totally logical, simple and efficient, with steps in the transom (standard bathing ladder), liferaft fixing point on aft coachroof, solid aluminum bulwark the full length of the hull, as well as an aluminum rubbing strake. The numerous opening hatches and Dorade vents are positioned in such a way so as not to impede movement on deck. The chainplates for the upper and lower shrouds, which are positioned right against the coachroof, also leave the side decks completely free for easy access to the foredeck for the sunbathing area and the electric windlass. In the interior, the warm atmosphere (cherry finish) on board the Oceanis 40CC is essential to a good quality of life on board. To starboard, the saloon table and the raised settees ensure a pleasant "sea view" from inside the boat. Opposite to port, is the navigation station: chart table with stowage, bookshelves, 16-function electrical control panel, and all the room you need for on-board electronics. In the forward cabin, your guests have a large double berth, hanging locker, many other lockers and an en suite head compartment. In the passageway to port, which runs alongside the large engine compartment, the Oceanis 40CC's galley has everything you would normally find in the best-equipped kitchens: freezer, refrigerator, double stainless steel sink with hot and cold pressurised water, three-burner gimballed stove and many cupboards and drawers. As for the master cabin, all the incomparable advantages of the centre cockpit in terms of comfort and space have been fully exploited: large double berth with access from both sides, vanity-desk with mirror and lockers, large hanging lockers and your own head compartment with WC and separate shower. The Oceanis 40CC is truly the product of in-depth study into the expectations of ocean-going leisure sailors. A successful marriage of classicism and modern technology. Equipment List Oceanis 40CC Specifications - Standard Equipment On Deck - Stainless steel stemhead fitting with 2 fairleads and roller. - Open stainless steel pulpit - Leroy Sommer 1000W electric windlass with up - down control - Self-bailing anchor well with twin opening hatches and eye bolt for mooring line - Bulwark surrounding the deck with teak cap - 8 anodized aluminum mooring cleats: 2 forward, 2 midships, 4 aft - Forestay chainplate with slats on the stemhead fitting - 2 chromed bronze lower shroud chainplate, 2 Beneteau streamlined chromed bronze shroud chainplates - Anodized aluminum identified fuel and water fillers - Stainless steel stanchions with two sets of covered stainless steel lifelines - Lateral opening lifelines - 4 teak handrails on coachroof - 4 dorade vents - Forward cockpit coaming for windscreen, rigid top or sprayhood - 2 genoa sheet tracks with adjustable cars - 2 genoa sheet turning blocks - Mainsheet track with adjustable car - 1 Lewmar 40C STO halyard and maneuvering winch - 4 Spinlock XL double stoppers for halyards and maneuvering lines - 2 Lewmar 48C STO genoa sheet winches - 1 Lewmar 40C STO mainsheet winch Center Cockpit - Hydraulic steering wheel pedestal mounted or on forward port cockpit bulkhead - Control panel on cockpit bench seat facade - Teak slatted cockpit benches - 1 winch handle box - 2 chromed bronze winch handles - 2 sidedeck lockers (one for propane bottle) - 2 lockers for mooring lines and fenders on transom - Fixing points on aft coachroof for liferaft - 2 - 18-12 S-S backstay chainplates - 2 - 18-12 S-S pushpit with 2 teak seats, closed by sheathed lifelines - Emergency tiller - Transom with teak slatted skirt - Teak slatted step in transom - Folding 18-12 S-S swim ladder with wooden steps - Cockpit shower -- Aluminum rubbing strake either side of hull Spars - Rigging - Keel stepped mast and anodized aluminum boom - Mast with main furling system - 2 sets of spreaders angled aft 10 degrees - Spinnaker pole - Partner fitting with articulated blocks for returning halyards to cockpit Standing Rigging - Stainless steel rigging: upper shrouds, lower shrouds, 2 backstays - Twin groove forestay with Profurl genoa furler - Lateral rigging with discontinuous rigging to first set of spreaders Running Rigging - 1 main halyard, 1 genoa halyard - 1 mainsheet with blocks, 2 genoa sheets - 1 maneuvering line for genoa furler - 1 line for furling main, 1 line for unfurling main - 1 boom halyard - Sails - Furling Dacron main - Furling Dacron genoa with UV protection strip Interior Accommodation - Cherry interior Companionway - 15 mm Altuglass sliding hatch - Twin wooden companionway doors - 2 cherry wood stained handrails - 4 molded wooden steps with anti-skid strip, on polyester engine cover - Hanging locker to starboard of companionway Salon Starboard - Nav. station - Chart table with chart stowage and molded wood fiddle - Bookshelves - Lockers - 12V, 16 functions hinged electrical panel - Hinged panel for onboard electronics - Large tool drawer - Drawers - Seat - Opening 15" x 8" porthole in coaming with curtain - Halogen lamp with independent switch - Red watch light Salon Area - Settee - Lockers along hull sides - Wood hull lining - Reading lights - Fixed 6'7" x 8" porthole with curtain - Vent To Starboard - Raised deck salon for panoramic visibility - Shaped settee with cushions with 5.5" thick, medium density foam and backrests - Salon table with stainless steel base - Lockers and cupboards along hull sides - Wood hull lining - Lockers underneath settee - Halogen lighting with independent switch - Fixed porthole 6'3" x 10" with curtain - Opening Plexiglas panel in coachroof 23" X 23" with curtain - Padded deckhead lining - Bookcase - bar Galley in Port Gangway - Antium work surface with molded wood fiddle - Twin rectangular S-S sinks - Chopping board over sink - Hot - cold water mixer tap - Foot pump for icebox discharge - Trash bin - 3 sliding vegetable baskets - S-S oven with 3 burner gimbaled stove and S-S protection bar - Cutlery drawer - 2 cupboards to port, lockers along the side of hull - Top loading 2 compartment freezer - fridge,with 12V evaporator - 2 opening portholes 15" x 8" in coaming with curtains - Lighting by halogen lamps with independent switches and fluorescent tube - Dust box Aft Owner's Cabin - Central double bed 6'7" x 4'11", 4.7" thick mattress - 2 symmetrical hanging lockers - Stowage space - lockers along side of hull to port and starboard - Lockers - Step either side of the bed for easy access - Vanity - desk with mirror - Wood hull lining - Padded deckhead lining - 2 opening portholes 15" x 8" in coaming with curtains - 1 opening porthole 15" x 8" in transom with curtain - 1 opening porthole in aft coaming 27" x 8" with curtain - 2 dorade type vents - Lighting from halogen lights with independent switches and reading lights Aft Owner's Cabin Head - Compartment molded in one piece to be waterproof and easy to clean - Marine toilet with polyester lid - Bathroom accessories - S-S wash basin with hot - cold water mixer tap - Mirror - Cupboards - lockers - Stall shower with hot - cold water mixer tap - Electric pump for used water - 2 opening portholes in coaming 15" x 8" - Halogen lamp with fluorescent tube Forward Owner's Cabin - 6'3" x 4'7" double bed, 4.7" thick mattress - Drawer and lockers beneath bed - Hanging locker - Wood hull lining - Padded deckhead lining - 1 opening porthole in coaming (23" x 18") with curtain - 1 opening porthole in coaming (13" x 7") with curtain - Halogen lamps with independent switches and reading lights - 1 dressing table with mirror and shelves Forward Head Compartment - One piece molded compartment for waterproofing and easy maintenance - Marine toilet with polyester lid - Bathroom accessories - Wash basin with hot - cold mixer tap - Shower - Mirror, cupboard - Electric pump for discharge of water - Opening porthole in coaming 23" x 18" - Fluorescent tube lighting Engine Compartment - Engine 50 hp diesel - Single lever engine control - Engine chassis integral with hull liner - Engine control panel in cockpit - Engine compartment insulated by lead foam - Space for generator in engine compartment - 53 gal. fuel tank - Fuel - water filter on fuel circuit - Stainless steel shaft protected by skeg - Triple bladed prop Electrical Circuit - 12V Electrical circuit - 2 - 125 amp batteries for service with circuit breaker - 1 - 95 amp engine battery with circuit breaker - 110V-220V 45 amp H battery charger - 12V 16 function Electrical panel with 12V plug - Options conduits - Overhead halogen lighting, reading lights and fluorescent tubes - Cockpit lighting - Navigation lights - Masthead light - Deck spot - 110V-220V shore power plug (specify when ordering) - Electrical panel 110V-220V (specify when ordering) - 4 - 110V-220V sockets (specify when ordering) Water Circuit - Manual bilge pump - Electric bilge pump - 132 gal. fresh water capacity in 2 rigid tanks with hull liner - Valves for tank selection - 11 gal. water heater run off engine and shore power - Pressurized fresh water unit with compression tank - 2 electric discharge pumps for showers Propane Circuit - Box for propane bottles (2 bottles) in side lockers with air vent (conforming to US regulations) - Circuit breaker Miscellaneous - Certificate of Individual Bureau Veritas approval - Maintenance kit - Owner's manual - Owner's briefcase. Oceanis 40CC Optional Equipment - Teak interior - Teak decks - Forward cockpit steering position - Lewmar electric 30EST maneuvering winch - Polyester coachroof dodger - Fixed davits - Engine driven refrigerator - Ardic heating with 3 outlets - Gennaker - Gennaker gear SAILBOAT IS LOCATED IN NEW ROCHELLE NY SAILBOAT IS ON LAND FOR WINTER STORAGE BUT IT CAN BE PUT IN THE WATER FOR POTENTIAL BUYER......

Cape Dory 28 ft. 1984

Houston, Texas

Make Cape Dory

Length 28.0

Cape Dory 28, 1984Length: 28'Engine/Fuel Type:Single / dieselKemah, TXHull Material: FiberglassUS$ $26,500 Designed by Carl Alberg, this Cape Dory 28' has handsome, traditional lines emphasized by a perfect blend of white fiberglass, teak trim and bronze ports. Her self tending club footed jib makes Karma easily sailed to windward, and her full keel provides balance in heavy weather. The tiller keeps you in tune with the wind, and, when moored, lifts out of the way for a more spacious cockpit. If you're looking to sail the bay, with a crew or on your own, this well maintained Cape Dory. New Refit in 2009: Repainted; rewired; new bowsprit;2014: New trans; engine repainted; new teak & holly sole2011: New air condition. New interior cushionsDodger Additional Specs, Equipment and Information:Boat Name Karma DimensionsLOA: 28 ft 2 inBeam: 8 ft 11 inLWL: 22 ft 2 inMinimum Draft: 4 ft 0 inDisplacement: 9000 lbsBallast: 3500 lbs EnginesTotal Power: Diesel Universial M18;15 HP Engine 1:Engine Brand: UniversalYear Built: 1984Engine Model: Model 18Engine Type: InboardEngine/Fuel Type: DieselPropeller:Drive Type: Direct DriveEngine Power: 15 HPNew shifting cables TanksFresh Water Tanks: 2 Plastic (30 Gallons)Fuel Tanks: 1 Aluminum (20 Gallons) Hull, Deck and Cockpittraditional Carl Alberg designed hull, a full keel with attached rudder and tiller steering. The hull is constructed of solid fiberglass laminate and the deck has a balsa core with fiberglass laminate overlay. Eight opening bronze ports and two deck hatches keep the interior cabin airy and cool. The white deck has tan non-skid, and is accented with a teak toe rail. Inside the toe rail is a double lifeline system with stainless steel stanchions, all connecting to a stainless steel bow rail and stern rail. The cabin house top has teak eye brows above the bronze ports, teak hand rails, teak tracks for the companionway sliding hatch and a teak dorade box for the cowl vent.The cockpit can easily accommodate four adults when underway. The mainsheet attaches aft of the cockpit and with the tiller stored up, the cockpit opens up for more guests. Interior Cabin LayoutFrom the cockpit, step down into the salon area. Behind the steps you'll find the galley stainless steel sink. To port is a propane stove; to starboard you'll find the built-in icebox.The salon has a port and starboard settee and dining table. The port settee opens to a double berth; behind is a pilot berth. The starboard settee is a single berth with a storage shelf behind. The dining table folds and can be stored up against the midships wall when not in use.Following the salon is the head to port and a hanging locker to starboard. At the bow is a traditional v-berth; two single berths or with the center filler piece, one double berth.Teak and holly sole throughout and accent high gloss bright work create a warm cozy atmosphere below decks. Rigging, Sails and CanvasSweet Pea is sloop rigged with a self tending club footed jib.Aluminum spars with 3/8" 1x19 Stainless Steel Standing RiggingLewmar #16 two speed winch, port and starboard in cockpitLewmar #6 winch, on cabin topMain Sail, in very good conditionSelf Tending Jib, original 1984 in good conditionLight Air Sail (relatively new in excellent condition)Roller furling gibwisker pole Navigation Equipment and ElectronicsautopilotDepth sounderMarine VHFFluid Damped Magnetic Compassmany extras Electrical SystemTwo 12 volt DC Lead Acid Batteries (Group 31) New 20152 Electrical Panel with 6 circuit breakers ea.Battery switchElectric bilge pumpWeems & Plath Auto Mac 2 Alternator ColtrollerWest Marine Battery Charger Status/Monitor Additional InventoryDanforth Anchor and CQR anchorMOB / Life SlingPropane Grill, attaches to sternStainless Steel Boarding LadderOutboard BracketDocklines and fendersBoat HookFire Extinguisher

The Nicest 42’ Aft-Cabin Cruising/Chartering Sailboats - Located in Costa Rica

Make Gulfstream

Model Aft Cabin

Category Cruiser Motorcycles

Length 42.0

The following is from when we had purchased her just two years ago. She is Literally, one of the Nicest 42’ Aft-Cabin GulfStream Blue Water Sailboats Ever Built and in Absolutely Excellent Condition ‘Beautiful & Spacious’, Loaded with Extras including ‘Central-Air Conditioning’ and Costa Rican Flagged. A Perfect Business Opportunity She’s Completely Renovated and Fully Equipped for Live Aboard, Tourist Business or for Comfortable and Safe Extended Cruising She is ‘Beautiful & Spacious’ Inside and Out including ‘Central-Air’ Costa Rican Flagged and offers a Perfect Business Opportunity New Exotic Wood Interior including over $75,000 in Upgrades and Electronics Sailing capabilities: Offshore Cruising and without limitations. This GulfStream-42 is in Excellent ‘Ready to Go’ Condition. She only needs someone to Appreciate and Enjoy Sailing with her. Please see attached pictures for details. She is Flagged and located in Costa Rica, Certified and All Taxed are Up to Date. We purchased this Beautiful Sailboat last year from a local sailor with 20-years of extensive offshore sailing experience but since we have had little time to enjoy her, we have decided to let her go to someone who would appreciate her as much as we have and has more time to enjoy a Lifetime of Wonderful Memories. BOAT DESCRIPTION: COMPLETELY UPGRADED AND FULLY EQUIPPED GulfStream-42 'Center-Cockpit' in Tip-Top Condition. Central Air-Conditioning, 6'8" Head Room with 2 private cabins, Two Full Bathrooms with Private Showers. Walk-through Aft Master Suite. Costa Rica Registered and Flagged. Title transferable through a Costa Rica Corporation. Perfect Income for Tourism. Boat is in overall excellent condition and well prepared for extended blue-water or costal excursions. Electricity is provided by both Shore Power, Solar and her onboard "4.5kw Northern Lights" generator. Interior/Cabin: Central Air-Conditioning provided throughout with a Comfortable and very roomy 'Walkthrough' Aft Cabin Stateroom with private head and shower, Forward V-birth with Private Head and Shower with lots of head room. Enjoy watching Movies or local Television Channels from her ‘Sharp 26" 720p HD LCD Television’. She sleeps 6 with lots of storage, Universal Gas Stove/Oven, fridge/freezer, very Spacious Cockpit, Newly Painted Bottom and Deck. General remarks: All New Navigation Electronics including the INTERPHASE (1,200') Forward Looking Sonar, Garmin 5208 8.4" 'Touch Screen' GPS, Garmin 18" HD Radar. She is an Excellent Sailor, Very Comfortable, Roomy, Extremely Strong and Well Built, Well Kept boat. Perfect for Chartering, Single Handling or as a Spacious Family Boat. Sails: 1992 and in very good condition. DETAILED SPECIFICATIONS Description GulfStream built many designs but this one's tough to beat as an outstanding cruising design. Her cutaway full keel and skeg-hung rudder offers uncompromising performance between comfort and stability. She's ready to store your provisions aboard, cast off her lines and make way for an Experience of a Lifetime. Dimensions LOA: 42/00 ft/in LWL: 33/00 ft/in Beam: 12/00 ft/in Maximum Draft: 4/10 ft/in Displacement: 22000 lbs Bridge Clearance: 56/00 ft/in Galley REFRIGERATION/FREEZER: Adler Barbour 2.8A@12vDC STOVE: Universal SS three-burner propane stove with oven (LPG) with GAS ALARM SINK: Single SS WATER SYSTEM: Pressure SEAWATER WASHDOWN WATERMAKER: New and Never Activated Powersurvivor-35 Accommodations A very spacious, cruise-friendly, Live Aboard interior lay-out! Provides Central Air-Conditioning throughout. The Aft Master Stateroom has a full-width KING-SIZE BED with Private head/shower. The Forward Stateroom has a roomy v-berth and storage in lockers, drawers and bins. The guest head is to port. The salon features a H-shaped dinette and a spacious L-shaped galley to port and an adjacent settee to starboard. The navigation stations is center and to starboard. Engine ENGINE: 50Hp Perkins-4107 diesel, completely overhauled 1998 HOURS: 150 hours since rebuild. New April, 2012 Heat Exchanger SPEED: Cruising Speed: 6mph / Maximum Speed: 8mph Electronics CHARTPLOTTER: New Garmin 5208/GSD22 FISH FINDER: Sounder/Fish-Finder BlueChart G2 2012 Garmin Vision VSA002R South America West Coast BlueChart G2 2012 Garmin Vision VUS031R Southwest Caribbean RADAR DOME: Garmin GMR 18 HD 18" Radar Dome DEPTH/TEMP: Garmin B60-12, 12 Degree Tilted Element Transducer VHF: Icom IC-M80 & Garmin VHF 200 Marine Radio HANDHELD Uniden MHS75 New Submersible Two-Way VHF Radio SONAR: 1,200' INTERPHASE COLOR TWINSCOPE FWD LOOKING SONAR STEREO: Dual MXD50 AM/FM/CD Marine Receiver AM/FM/CD WIND SPEED & DIRECTION: Horizon Standard AUTO PILOT: Alpha Marine Spectra "Top of the Line AP" KNOT METER/LOG: Horizon Standard COMPASS: Danforth Constellation (at helm) Electrical ELECTRICAL SYSTEM: 12vDC/120vAC AIR CONDITIONER: Mermaid 16,000btu Air Conditioner GENERATOR: 2008 Northern Lights Generator (710 hrs) BATTERIES: 3-marine deep cycle House Batteries - 2-Starter Batteries - Both New May, 2012) AMP HOURS: 100Ah each BATTERY PARALLEL SWITCH: (2) Yes BATTERY MONITOR: Sterling ProReg D Marine 12/24 Volt Advanced Regulator DOCKSIDE CABLE: 50' 30-amp INVERTER: Power Bright 1,500w (New May, 2012) INTERIOR LIGHTING: 12vDC ALTERNATOR: Powerline Series 25 - 120amp (+ Control) BATTERY CHARGER: Progressive Dynamics 40 AMP Marine Charger PD2140 OTHER: 1-250W Mono-Crystalline Solar Panel Mechanical Equipment PROPELLER: Three-blade bronze BILGE PUMPS: New April, 2012 (1) New Rule 3000 automatic RAW WATER SEA STRAINERS: New April, 2012 Bronze FIRE EXTINGUISHING: Manual dry chemical FUEL FILTERS: (1) Racor STEERING: Wheel, cable to quadrant FUEL SHUT OFFS: Diesel, LPG FRESH WATER COOLING: Yes ENGINE ROOM HEAT EXTRACTOR TRANSMISSION: Hydraulic Borgwarner MASTER TOILET: Thetford Tecma 'Silence Plus' Electric Toilet - (New) GUEST TOILET: Jabsco 'Manual' Toilet - Guest Bathroom (New) HOLDING TANK: None WIND VANE SELFSTEERING: None FIRE SAFE: (New) Sails & Rigging SAILS: 2-Main (extra as backup); 1-Genoa (Roller Furling); Spinnaker ROLLER FURLING: Hood 808-SL (New) TOTAL SAIL AREA: 691 sq. ft. MAST: Aluminum, keel-stepped STANDING RIGGING: SS wire (New) SPINNAKER POLE: (1) WINCHES: (2) Barlow-16 at the mast with Barlow-2 wire main halyard winch. Lewmar 48 2-speed and a single Barlow-16 winch. Deck & Ground Tackle ANCHORS: 45lb. Bruce; 45# CQR, 40lb Grapnel stern anchor TOE RAILS: FG LADDER: Folding SS and Plastic swim BOW PULPIT: SS ANCHOR WINDLESS: 'MAXWELL' (12vDC) ANCHOR TACKLE: Two Forward Compartments. Bay-1: 250' Grade-40 High Test Genuine ACCO Brand Windless Anchor Chain Bay-2: 90' Grade-40 HT ACCO Chain with 300' of 1" Rode DINGHY & MOTOR: 2009 9.5 Caribe-C9 10' Hard Bottom Inflatable with Evenrude 15-h.p. Outboard. Both serviced April, 2012 ANCHOR DAVIT/ROLLER: Double SS LIGHTS: Deck-mount Navigatin, Masthead Tricolor, Spreader COVERS & CURTAINS: Custom aluminum Bimini with full enclosure, cockpit and aft deck awnings LIFELINES & STANCHIONS: Double SS wire on SS stanchions DECK MATERIAL: FRP with integral nonskid BOARDING GATES: P&S Safety Equipment LifeSling Overboard Rescue System 7-Adult & 2-Children Life jackets Exclusions Owners' personal effects She's located in Costa Rica and Import as well as all other Taxes are Fully-Paid and Up-to-Date. FYI: Import Taxes in Costa Rica for Sailboats are 65% of their Book Value. We've Invested over $125,000 since owning her however,she could be yours today for only $109,000 Reasonable Offers Considered.

1979 Hunter 30 FT Sloop Priced to move

Dingmans Ferry, Pennsylvania

Make Hunter

Model 30 FT Sloop Priced To Move

1979 Hunter 30 FT Sloop Priced to move This is a 1979 Hunter 30FT Sloop powered with a 27 HP Yanmar 3 GM Diesel Engine! Designed by John Cherubini. Priced to move! SPECIFICATIONS: LOA: 30ftLWL: 25ft-9inBEAM: 10ft-1in DISPLACEMENT: 9700DRAFT: 5ft-2in BRIDGE CLEARANCE: 45ft- 6in BALLAST: 4100 LBS ENGINE: Yanmar 27hp Model: 3GM CRUISING SPEED: 6 MAX SPEED: 7 TANKAGE: Fuel: 12 Water: 30 ACCOMMODATIONS: Traditional layout with a good V-berth forward (V-berth cushions missing), full sized head with shower, hanging locker. In the Salon there are settee berths and a dinette that folds up to the bulkhead. There is an L shaped galley and quarter berth with a small chart table at its head. Headroom 6ft- 4inBeautiful woodwork throughout Ample stowage in drawers and lockers16,700BTU Ocean Breeze Marine AC with heat and Programmable ThermostatGalley with refrig. Box and stoveSwim ladderNice cushions including new cockpit cushionsTeak and Holly sole in SalonCockpit Bimini SAILS AND RIGGING: Standing Rigging 6 years oldRoller Furled JibMain Sail with coverNewer Jib sheetsUpgraded Safety LinesPedestal SteeringFixed Fin ballasted KeelNew complete bottom paintStorm Jib bagged insideLots of Boat related item spares and supplies ELECTRONICS: Two Ship to Shore Radios: ICOM IC-M602 VHF Radio with DSC, AND STANDARD HORIZON VHF RadioShip Compass *** BOAT LOCATED IN: Whitney, Texas (76692) ***

16 ft Capri sail boat and trailer

Montgomery, Texas

Model Day Sailer

Length 13.0

1987 Capri13 sailboat, sunshine yellow and white. Sail, rudder and removable keel. Very light boat, weighs 128 lbs. All in working order, sold as is, where is. Trailer is old looking and needs painting, but is functional with lights & license. Capri Sailboats was established in 1972 as a Californian-based builder of small to medium sized sailboats. Ideal for leisure sailing, Capri Sailboats offered fiberglass watercrafts only 8 feet in hull length. Operating under the Catalina Yachts company since formulation, the Capri Sailboats brand was disbanded after 1999.

Rebel 16 Mark II Sailboat with Aluminum Trailer

Angola, Indiana

Length 16.6'

Stable fiberglass sailing boat carries six people (or 1170 pounds). Includes trailer, full rigging, and TWO suits of sails. One suit of sails is in like new condition, the other set is in very good condition. Serial number 1929 (built in late sixties to early seventies I believe). The centerboard swings up into the cockpit, so you can change the depth to dock in shallow water. The rudder also swivels up if it hits an obstruction. The trolling motor in the photos is not included. There is, however a permanent motor mount on the stern. The boat will take up to a 5hp motor, but my 30lb. thrust trolling motor drives it around just fine. The boat is located on West Otter Lake, Angola, IN. Buyer with the selling price in cash or Pay Pal payment can drive it away. (Trailer takes an 1 7/8" ball hitch.) The following article from Sailing Magazine gives a great description of Rebel sailboats. You can access the original on SailingMagazine.net. Rebel 16 2008 January 8 By Staff This nimble and tough classic is perfect for a daysail or a day of racing This year the boat that holds claim to being America's first production fiberglass one-design will celebrate its 60th birthday. That the boat is still in production makes this milestone that much more remarkable. In 1948, fresh out of the Navy, Ray Greene began building a 16-foot family daysailer out of his Toledo, Ohio, shop using a revolutionary new material called fiberglass. The design of the boat was based on lines drawn by a local high school drawing instructor by the name of Alvin Younquist. With its wide, 6-foot, 7-inch beam and 110-pound steel centerboard the stable little boat known as the Rebel soon became a hit on the Midwest's inland lakes. And while Greene said he never intended to create a racer, thanks to the boat's performance-courtesy of a large 120-square-foot main and 46-square-foot jib on a fractional rig-it wasn't long before a competitive structure was built around the boat. By 1952 a class association had been firmly established and by 1963 the class boasted 138 active members. Not bad. Fleets started popping up across the Midwest, south into Kentucky and all the way down to Texas. Meanwhile, class members could be found sailing the inland lakes of the Eastern Seaboard from New York to Florida. After 25 years of building the Rebel, with more than 3,000 hulls produced, Greene was ready to call it quits and sold the works to a group of Chicago investors. Production of the Rebel continued at a steady pace during the 1970s, and was done under a number of names: Melling Tool Co., Rebel Industries and finally Spindrift One Designs. After Spindrift folded, the Rebel moved to Michigan in 1988 when Nickels Boat Works of Fenton took over with the production of the Mark V model. Nickels continues to build the Rebel, offering buyers a choice of a daysailer version for $9,860 or the optimum racing version for $11,872 less sails and trailer. A stainless steel centerboard now comes standard with the Rebel. Nickels also continues to be a great source for parts and accessories, as well as information, on the Rebel. One tough Rebel While there have been reports of problems with the foam flotation on older boats becoming waterlogged, that has been less of a problem on boats from the 1970s and later. Other than that, a buyer of a used Rebel should find few issues with the condition of this durable little boat. Indeed, boats 25 years and older will still top regatta leaderboards. "They're well made, very rugged boats that will last forever," said Al Vorel, National Rebel Association Commodore, who has been racing the same boat, No. 3914, for almost 20 years. "You don't have to run out every 5 to 10 years to buy a new boat." This is one of the reasons for the longevity of the class. Boats tend to stay in the family, passed down from parent to child, with the younger generations wanting to keep the racing going. "My mother races, and my daughter sometimes races, so there are times we'll have three generations on the course," Vorel said. This also, of course, keeps a lot of boats off the market, and finding a used Rebel can be a bit of a challenge. But thanks to the Internet, it's possible to locate a few sellers. Prices can vary from just under $1,000 for an older boat in need of some work to $3,000 or more for a later model. Buyers can typically expect to pay in the neighborhood of $1,500 for a pre-Nickels-era boat in good shape. We were fortunate enough to find a late 1970s Rebel listed for sale on www.craigslist.org. Better yet, the seller was within trailering distance. The offer on the boat was $1,400, so we drove out to take a look. The boat was well cared for, kept under a roof winters, and showed no structural damage. Other than some algae stains and scuff marks the finish looked good, and all the gear was there, including the main and jib, which the owner said he bought new about seven years ago. We did see some possible issues, including a rusty, pitted centerboard and a wooden rudder that looked to have some rotting. So we offered to pay the full $1,400 if the owner threw in the trailer, which he originally wanted an extra $200 for. The deal was closed and we drove off with the Rebel in tow. Rebel with a cause With the boat parked in our yard the first item of business we wanted to take care of was the rusty centerboard. Nickels offers a stainless steel replacement board, and we could picture how sweet the boat would look with a shiny new stainless fin. Unfortunately, these centerboards run close to $1,000; more than two-thirds the cost of the entire boat. So such an extravagant purchase didn't make much sense. Instead we set about rehabilitating the old board. We removed, with a bit of difficulty, the 110-pound board and set in on sawhorses. The first step was to remove the old paint using paint stripper, then power sanding. We then slathered on some Duro Naval Jelly to remove the rust, wiping down everything with paper towels then finishing up with a clean, acetone-soaked rag. Next, we filled in the pits and hollows with West Marine Surfacing Putty, and sanded everything smooth. We made certain the blade was fair by running a straight edge along the board. We also further faired the rounded leading edge of the board to within the class rule limits, which prohibit tapering less than 1/16th of an inch and more than one inch in from the leading edge. We then primed the board with several coats of Interlux Primocon primer, which when dried we wet sanded with 400-grit paper, and finished with a couple coats of Interlux VC-17m Extra bottom paint. With the centerboard done, we then turned to the rudder. An ice pick determined the wood was beginning to rot near the lower trailing edge. We probably could have rehabilitated the rudder as well, but since we had saved some money by not replacing the centerboard we decided to spring for a new rudder. We opted for a fiberglass blade, supplied by Nickels for $375. This cost covered just the blade, as the original aluminum rudder cheeks and hardware were still in good shape. While we were on the phone with Nickels, we decided to order all new running rigging to replace the weathered lines the boat came with. This included lines for the cunningham, boom vang, centerboard system, as well as sheets and halyards for both main and jib. The total for 112 feet of ¼-inch line and 105 feet of 5/16-inch line came to $100. Next we took a closer look at the standing rigging. The spars showed no defects, and with a bit of metal polish and elbow grease the rotating mast, boom and aluminum whisker pole looked good as new. The 1-by-9 stainless steel shrouds and forestay also showed no visible defects. We did, however, find the diamond stays on the mast to be tuned rather tight. According to the North Sail's One-Design tuning guide for the Rebel, an overly tight diamond can limit fore and aft mast bend, and can even cause negative pre-bend, where the mast bends forward at the tip. Since we want to have a competitive boat, we loosened the diamond tension and will readjust after doing some sea trials. As we said, we ultimately wanted to race our Rebel and didn't want a slow boat. So obviously the 7-year-old suit of sails had to go. This would be our biggest expense, and a new suit of sails would alone exceed the original cost of the boat. A new main and standard jib (a light air jib is also available) from North Sails set us back $1,615, which included $20 for class royalties but not shipping. Certainly this was a blow to our budget, but we rationalized it by thinking about the fun we would be having with some close racing come summer. Our last order of business was getting our bottom clean and smooth. We first scrubbed the hull down with a detergent then wet sanded everything below the rails to a slick surface with 1,200-grit paper. After a rinse and wipe down with the hose and clean towels we were satisfied we had a slick bottom. We finished off by treating all our hardware and moving bits to a little McLube Sailkote spray. We now have what we feel will be a contender on the course for our racing crew of two. Yet, with the roomy Rebel cockpit that can seat six, we're also looking forward to some lazy summer daysailing when friends and family show up. Either way, we'll certainly get our money's worth from this tough but nimble little classic. LOA 16' 1.5" LWL 15' 10" Beam 6' 7.5" Draft 3' 4" Weight 700 lbs, Sail area 166 sq. ft.

16' day sailer w/trlr, cabin, mainsail, and self-furlling jib -- Priced to sell!

Niantic, Connecticut

Make Compac Yacht

Model 16/2 (extended Bow For Larger Jib)

Length 16.2

1988 16.2ft Compac Yacht. Extended bow to accommodate larger jib. Self-furling jib, standard jib, and mainsail all included. Interior and exterior in okay condition. Needs new bottom coat paint. This boat has sailed all over Long Island Sound, from Niantic Bay to Plum Island. My father is done with it and I am trying to pass it on to a new owner. A little bit of work and this boat can be a nice day sailer.

sailboat 33 ft Tarten Ten Race boat Day Sailor with incredible trailer

Ada, Michigan

Make S&S

Model Tarten Ten

1978 S&S Tarten Ten in above average condition senior citizen owned. less that 100 actual hours of total actual use. comes with mast, jib, tiller handle and all deck railing is inside the boat. comes with a custom built trailer tri-axle 3 7k rated axles will hold up to 45 ft boat, has extender very heavy duty construction. add 16ft to ease launch. call 616 874 8235 for details paypal used for deposit only unless approved by seller. i do have a heavy duty cradle that is also on a trailer and ready for transport anywhere. the cradle is not offered with this action. may be purchased seperatly. the boat was appraised between 13 and 17 and the trailer was appraised at 10 to 12

sailboat 33 ft Taren Ten Race boat Day Sailer less than 100 hours diesel motor

1978 S&S Tarten Ten in above average condition senior citizen owned. less that 100 actual hours of use. i have a custom built trailer,, has extender very heavy duty construction. add 16ft to ease launch and a cradle that are options to the sale not offered in this post. call 616 874 8235 for details paypal used for deposit only unless approved by seller. have heavy duty cradle available if needed.

1969 Columbian 22 Sailboat

Patchogue, New York

Make Columbian

Model 22 Sailboat

1969 Columbian 22 Sailboat Thick hulled sailing vessel, sails in great shape, new awlgrip, rated for 8 passengers, shows Bristol, fixed keel draws 3 ft This vessel has sink and marine head below.  No disappointments, call Dave Glover immediately for more info and pixs.  1/19/16 PRICE REDUCTON, MUST SEE

1992 Hunter 37.5 Legend

Oviedo, Florida

Model 37.5 Legend

1992 Hunter 37.5 Legend Brand new listing. This is a lightly used and good looking Hunter 37.5 Legend with approx. 548 hours on the Yanmar 3HM35F diesel engine. This 37.5 Legend is one of Hunter's optimum size sailboats for comfort, space, strength and sailing performance. Cruise to the Bahamas in this sweet boat with the new Garmin touchscreen Echomap70 GPS and enjoy some island life! Maximum strength is achieved by a bonded full length internal frame and stringer system; chain plates then are anchored to this main frame system to carry the rig loads of this strong performance cruiser. The 12 ft. 10 in. beam and 6' 6" head room provides more than ample space and comfort. The hugh aft athwart berth and forward berth provide comfortable sleeping quarters for 4 adults with provisions for three more people to sleep in the main salon area. A comfortable size head with shower and vanity is located rear of center near master aft berth. The 16,400 lbs. displacement, 5,900 lbs. solid lead wing keel (4 ft. 11 in draft) makes for a comfortable sailing experience. Mystic Quest carries a 75 gal fresh water tank, 35 gal fuel tank and 25 gal holding tank. The vintage of this Hunter Legend still has the rich teak woods with thick teak trim and moldings, ash battens, cedar line lockers, corian galley and vanity counter tops. This is one of the last Hunter models with the costly but preferred full length extended aluminum toe rails. The original natural gas system was converted to propane system with locker and aluminum propane tank, electric solenoid on/off switch in custom teak mounting in galley. Dockside factory installed central AC system with ducts to vents in all boat compartments. Original factory Hood two line headsail furling replaced with Hood single line furling system.  Blister free bottom received 5 coats of Interlux 2000 barrier paint for extended blister free bottom in 2014. In the cockpit ther is top quality waterproof cushions (10) and a custom fitted vinyl cover. A custom designed cockpit table made from weather resistant starboard material. Mast head tri-light and standard running lights with the new touchscreen Garmin Echomap 70 GPS chart system. Ice box was converted to electric refrigeration and microwave is in a custom made teak shelf. The Dutchman's furling system was replaced with lazy jacks. The sails are original sails but are in good condition and were stored inside for most of their life. The auto pilot and wind gauge's are not working. The shower has never been used.

2010 Jeanneau 45 DS

Make Jeanneau

Model 45 DS

2010 Jeanneau 45 DS Dimensions Year: 2010 LOA: 45 ft, Beam: 14 ft 4 in Draft: 5 ft 6in (shoal draft) Displacement: 22932 lbs,Ballast: 6514 lbs Headroom: 6 ft 4 in Accommodations Two Cabin version with two heads, large aft cabin master suite with private head and shower. Mattress with Froli Sleep System.Huge main salon with U shaped dining table. Galley with 3 burner stove and oven, refrigeration and freezer, double sinks, fridge. Beige Ultraleather cushions in main salon, dining table converts settee to double berth. Number of cabins: 2 Number of double berths: 3 Number of heads: 2 2 Electric heads with freshwater flushing or seawater flushing Creature Comfort Air conditioning / Heating reverse cycle -2 units, 9K and 16K reverse cycle Hot water tank with electric and engine heating Galley Double sinks Front and Top loading fridge Deep freezer with separate Compressor 3 burner stove and oven. Microwave Engine Yanmar 4JH4TE 75 Hp Turbo Diesel Engine Hours: approx. 270 Propeller: 3 blade folding propeller (Flexofold) and orig.3 fixed blade propeller as spare Bow Thruster 7 Hp Hull and Deck Wood cockpit floor and seats Wood folding cockpit table, varnished with cover Full Canvas, dodger, bimini, connector, Frame is heavy duty stainless, handrails on Dodger. Electric Anchor Windlass with 2nd control at helm Cockpit Hot and Cold Shower Wheel and Winch and instrument covers Life line gates midship Dual Leather wrapped wheels Sails and Sail Handling Furling main Roller Furling Genoa 140 Percent Electric 53ST Genoa Winches Coach Roof Harken 44ST Electric Winch Port side Coach Roof Harken 44ST Winch Starboard side All lines lead aft to Cockpit thru rope clutches Navigation Equipment Raymarine network with: Chart Plotter -Raymarine E 130W with Platinum charts Autopilot Depth sounder Log-speedometer Wind speed and direction Electronic Compass 4 ST 70 displays, one for autopilot, 3 free programmable VHF -Standard Horizon with DSC and remote mic at helm Magnetic Compass -Two Entertainment Equipment Stereo with Blue Tooth and remote control Bose Speakers in Cabin and cockpit speakers TV set (LED) with separate DVD Player in main salon Tanks Fresh Water: 2 Tanks (162 Gallons) Fuel: 1 Tank (63 Gallons) Holding Tanks: 2 Tanks (34 Gallons) Electrical Electrical Circuit: 12V 110V System with 50 Amp shore power inlet 2000 Watt Magnum Inverter and back-up charger with Remote Control Additional 110 Ah house battery 60 Amp Battery charger LED Navigation lights, LED Deck Light, LED interior lighti

1984 Endeavour 38

Deltaville, Virginia

Make Endeavour

1984 Endeavour 38 This 1984 Endeavour 38 Aft Cockpit,"Chameleon" is the definition of solid. She performs like a dream and is built with the state-of-the-art construction methods Endeavour is known for.  Her extraordinary deck space features inboard chainplates and genoa tracks allowing that fine trim for closehauled work.  Electronics on this beautiful boat include:Raymarine Chartplotter/Radar with cards for East Coast, Bahamas, and Eastern CarribeanST60 Wind, Depth, and SpeedAIS West Marine 1000Raymarine Autohelm 7000VHF Icom 502SSB Icom, Tuner, AntennaRadar Reflector The boat's electrical system includes:2 - 80 Watt Solar Panels2- 110 Power Cords with adapters for 35 and 50 AMP ServiceLink 10 MonitorStarting Battery and 410 amp hour House Bank (4 Golf Cart Batteries)Freedom HF 1800 Battery Charger/Inverter This 1984 Endeavour 38 has had a number of updates and upgrades over the years. Some rigging updates are:Profurl Roller Furling NEW in 2009MacPack w/Lazyjacks NEW in 2013Mainsail w/ battens NEW in 2009Inventory includes Genoa 130 and Jib 100NEW Rigging in 2009 Ground Tackle for the boat includes: 65 lb CQR Anchor, 45 lb Claw Anchor, 225 Ft 5/16 G-4 Chain, 100 Ft BBB Chain, 200 Ft Rope, Lewmar Electric Windlass, Jabsco Pro Max 5.0 Raw Water Washdown. Below, you have all your comforts of home! Cruise Air Drop In Air Conditioner, LED Lights throughout, Eno 3 Burner Propane Stove and Oven, and Frigaboat Refrigerator/Freezer. The equipment list for this boat goes on and on! Call Norton Yachts today to find out more on this boat or to schedule an appointment to see her! She is truly a beauty, and she is ready to go sailing!

Narrow Results

Current search reset all.

• Keyword: sailboats 16 ft
• Beneteau (3)
• MacGregor (2)
• BENETEAU (1)
• Bavaria (1)
• Cape Cod Shipbuilders (1)
• Cape Dory (1)
• Catalina (1)
• Cheoy Lee (1)
• Chrysler (1)
• Columbian (1)
• Compac Yacht (1)
• Endeavour (1)
• Ericson (1)
• Fountaine Pajot (1)
• Gulfstar (1)
• Gulfstream (1)
• HERITAGE YACHT CORP (1)
• Hobie Cat (1)
• Jeanneau (1)
• Macgregor 26S (1)
• Nor'Sea (1)
• Sailboats (11)
• Daysailer Sailboats (10)
• Sloop Sailboats (9)
• Cruiser Motorcycles (3)
• Cruiser Sailboats (2)
• Catamaran Sailboats (1)
• Florida (10)
• Michigan (3)
• Pennsylvania (3)
• Washington (3)
• Maryland (2)
• New York (2)
• North Carolina (2)
• Wisconsin (2)
• California (1)
• Connecticut (1)
• Delaware (1)
• Georgia (1)
• Illinois (1)
• Indiana (1)
• Louisiana (1)
• Massachusetts (1)
• Oklahoma (1)
• Rhode Island (1)
• Virginia (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1995 Sam L Morse Falmouth Cutter

Bellevue, WA

2003 Chaparral 320 Signature

Seattle, WA

2008 Correct Craft Nautique 236

2016 Sea Fox 186 Commander

Chickasaw, AL

2008 Century 2600

Cincinnati, OH

1995 Smokercraft Ultima

Goldendale, WA

2020 Yamaha AR 210

Kenneth City, FL

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Upcoming events

• Tri Regional Championships June 22, 2024 Quannapowitt Yacht Club, Wakefield MA
• Al Morris Regatta August 03, 2024 Cathlamet Marina - Cathlamet WA
• New England Championships August 17, 2024 Massapoag Yacht Club, Sharon, MA
• Constitution & Bylaws
• More NACR 2018
• Rigging Measurements
• Tuning Guides
• Rigging a Winning Day Sailer
• Parts & Supplies

DS1 Manual 

DS2 Manual 

Home > Find Your Sail > Search by Make and Model > O’Day > O’Day 16.8 Daysailer

O’Day 16.8 Daysailer

" * " indicates required fields

Step 1 of 3

Let's Get to Know Each Other

Let's connect, why it's important to partner with a designer on your o’day 16.8 daysailer sail.

The design is the most critical part of your new sail. Ensuring the sail fits and performs its best is a must for our crew. The Precision Sails Design team are experts at their craft. Unlike other sail lofts all of our sailors work one-on-one with a designer to perfect their O’Day 16.8 Daysailer sail.

No Two O’Day 16.8 Daysailer Sails Are Alike

There are many factors that affect the performance and design of your sails. Location, sailing experience, and weather conditions all come into play when picking the perfect sail. Two mainsails made for two O’Day 16.8 Daysailer’s in California and Florida will have different designs, sailcloth, and options based on what is best for the sailor.

Taking measurements is easy. All sailors work alongside our measurement team to measure and confirm their rig specs. This helps ensure your design is flawless and allows us to extend our Perfect Fit Guarantee to all of our sailors.

Discover the best cloth for your sailing needs, our sail details, or more about how Precision Sails is leading the sail-making industry with innovative new practices.

Proudly offering the largest selection of sailcloth in the industry, our team is always available to help you find your perfect sail. Whether you're a weekend sailor, coastal cruiser, or club racer our team is ready to walk you through the process.

Types of Sails

Precision Sail Loft specializes in producing headsails, mainsails, spinnakers, gennakers, and code zeros. So no matter the type of sail you’re looking for, we can help. Our sails are trusted by cruisers and racers alike from around the globe. Review the sail options and craftsmanship available to customize your dream sail.

Build & Process

Every sail we craft is produced to the highest standards with the best hardware, craftsmanship, and skill-set in the industry. Pair that with Precision Sails' approach to communication and your sailboat will be ready to set sail before you know it.

Unparalleled Commitment To Helping Sailors

As experts in design, communication, and production our team is ready to take on the task of making sails for your boat. Give us a call to get started.

“ I just received my asymmetrical spinnaker, with sock and turtle bag, along with a new 135 Genoa. The entire process was simple and both sales and the design team were in regular contact if there were any questions. The customer portal was easy to use and lets you keep track of where in the process your sails are. Great sails, great service -Graham Edwards (Facebook)

“ The whole team at Precision Sails was fantastic from start to finish. We’ve had a laminate main and genoa made so far and have a spinnaker on the way. They listened carefully to our needs and recommended a great sail cloth. We couldn’t have gotten more bang for our buck! -Noah Regelous (Google)

“ We received our spinnaker and launched it yesterday and I just wanted to let you know how pleased we are with it. The service we received from your company was exceptional and the quality of your product is second to none. We will certainly be return customers in the next few months to replace our main and jib sails and will recommend your company to all our sailing buddies. Once again-thank you.” -Daniel Jackson (Google)

“ we had good communication during the planning stages and the knowledgeable people at precision sails really got me fixed up good! The sails look and work fabulous! my boat sails better than it ever had! couldn’t be more pleased with the product AND the service!” -Fred Jelich (Facebook)

“ Our new furling jib for a Corsair 27 Had to be specially designed due to the height of the furler, but this was accomplished quickly and in short order we had our sail which fits beautifully and has a great shape. It’s everything we could have wanted, high tech design, thoughtfully executed and affordable.” -Nancy Y. (Yelp)

Request a O’Day 16.8 Daysailer Quote

Looking to buy a new headsail or mainsail for your O’Day 16.8 Daysailer? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.

Thanks for telling us a bit about yourself and your boat. Our team will send you a preliminary quote based on information we have gathered from sailors similar to you.

We will give you a call in order to narrow down the options on your quote and improve the accuracy. If you want us to call you at a specific time, feel free to schedule a time on our calendar!

Thanks for telling us a bit about yourself and your boat. Our team will reach out to offer some suggestions and get started on finding you the perfect sail!