sailboat light kit

Open to the Public!

Boat Lights

Boat Cabin Lights

Boat Courtesy Lights

Boat Docking Lights

Boat Navigation Lights

Boat Spotlights

Boat Spreader Lights

Boat Stern Lights

Marine Flashlights

Underwater LED Lights

Marine Light Bulbs

Sea Dog LED Utility Light

Sea Dog Marine LED Utility Light These surface-mounted LED courtesy lights are constructed of injection-molded Delrin for strength, heat resistance and dimensional stability. Installs with four #6 FH fasteners (not included). Comes standard with low amp...

T-H Marine Underwater LED Lights

T-H Marine High Intensity Underwater LED Lights These T-H Marine Underwater LED Lights are designed to be used above or below the water line and feature low power draw and no high heat. With 180 Lumens, they have a greater light output and a...

T-H Marine LED Slim Line Utility Light

TH Marine Slim Line LED Utility Strip Light These surface mount LED Utility Strip Lights are great for lighting or decorating interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. Long...

Portable LED Boat Stern Light w/ Suction Cup

Innovative Lighting Portable LED Boat Stern Light w/ Suction Cup This Portable LED Boat Stern Light w/ Suction Cup is designed to withstand the marine environment with its molded one piece white body build with shock resistant...

Portable LED Boat Bow Navigation Light w/ Suction Cup

Innovative Lighting Portable LED Boat Bow Navigation Light w/ Suction Cup This Portable LED Boat Bow Navigation Light w/ Suction Cup features molded brass threaded mounting bushings with shock resistant neoprene accents. Rated at 100,00 hours LED...

Attwood Replacement All-Round Boat Stern Light

Attwood Replacement All-Round Boat Stern Light This Attwood Replacement All-Round Boat Stern Light features a clean translucent lens that provides a 2-mile 360° illumination for boats up to 65.6' (20m). The Frosted Globe uses a...

T-H Marine LED Courtesy Lights

TH Marine LED Oblong Courtesy Lights TH Marine LED Courtesy Lights are very attractive stainless steel bezel courtesy lights that can be used virtually anywhere. The bright polished stainless provides a very rich look. They are great for accent...

Attwood Frosted Globe All-Round Boat Navigation Light

Attwood Frosted Globe All-Round Boat Navigation Light This Attwood Frosted Globe All-Round Boat Navigation Light uses a standardized lamp that is commonly available in marine, auto, and convenience stores. It provides a 2-mile 360 degree...

4-LED Courtesy Light - Surface Mount

Innovative Lighting 4-LED Courtesy Light - Surface Mount This courtesy light from Innovative Lighting is a multi-functional marine light with four bright LEDs. These lights are shock and vibration proof and remain cool to the touch while in use. They...

Stainless Steel Drain Plug Underwater LED Light

Gen3 Marine Stainless Steel Drain Plug Underwater LED Light Upgrade the lighting on your boat with the Gen3 Marine LED Drain Plug Light. Easy to install, this underwater light replaces your current 1/2" garboard drain plug - no drilling necessary! Built...

Wholesale Marine LED Aluminum Flashlight Kit

 Product Description: Marine CREE LED Aluminum High Output Flashlight Case material:Durable aircraft-grade aluminum Water resistant CREE LED Bulb 900 Lumens Max - Output Varies based on battery voltage Telescoping to focus light beam from...

Attwood LED Articulating All-Round Boat Stern Light

Attwood LED Articulating All-Round Boat Stern Light This Attwood LED Articulating All-Round Boat Stern Light features improved lens technology and a cleaner light transmission. It is 30% brighter than traditional LED lights and has 60% lower mass...

Portable Clamp-On Boat Bow and Stern Lights

Attwood Portable Clamp-On Boat Bow and Stern Lights The Attwood Portable Clamp-On Boat Bow and Stern Lights feature a water-resistant, shatterproof polycarbonate lens. They are composed of shock-proof composite housing and have durable, portable LED...

Perko 36" All-Round Boat Navigation Light

Perko 36" All-Round Boat Navigation Light This Perko All-Round Boat Navigation Light helps preserve night vision and provides a reduced glare. With a black polymer top and collars, the amount of light wasted outside of the visibility zone is...

T-H Marine Led Recessed Puck 3''

TH Marine Recessed LED Puck Lights Great for lighting under cabinets, cockpits, headliners, and compartments Recessed Mounting Gives Clean Profile Look Circuit board completely sealed in epoxy to resist water, corrosion and vibration Low amp draw...

Perko Fold Down Masthead Horizontal Mount Base

Perko Fold Down Masthead Horizontal Mount Base Fold down adjustable angle mounting base with plastic adapter for "V" or flat mounting surfaces complete with knob and end plug. Chrome plated zinc alloy and black plastic. Length: 2" Width: 1-1/2"

Wholesale Marine LED Aluminum Flashlight

Marine LED Aluminum High Output Flashlight Case material:Durable aircraft-grade aluminum Water resistant CREE LED Bulb 900 Lumens Max - Output Varies based on battery voltage Telescoping to focus light beam from flood to spot. Requires 3 AAA...

Attwood Stowaway Boat Stern Light w/ Base

Attwood Stowaway Boat Stern Light w/ Base This Attwood Stowaway Boat Stern Light w/ Base features a new, clean lens with 2-mile 360 degree visibility. The base extends just 3" below deck while the swivel cover protects the base socket when light is...

Attwood Replacement Boat Stern Light Lens

ATTWOOD® FIXED BASE ALL-ROUND LIGHT PONTOON BOAT REPLACEMENT GLOBE Two-mile, 360º light visibility for boats 12 to 20 meters (39.4 to 65.6 feet). For use on pontoons, hard tops & radar arches. Replacement Globe

Sea Dog Chrome Led Dome Light 6''

Sea Dog LED Dome Light 6" LED Dome Lights have very low current consumption at .068 amps at 12 volts and have extreme long life. LED Dome Lights give off very low heat and are resistant to vibration. LED Dome Lights have 18 white LED’s per light.

Boat Lights: Lighting for all Types of Boats

Boat lighting is an integral part of keeping your safe both onboard and on the water. Every vessel needs to be well equipped with various kinds of boat lights from cabin lighting, navigational lighting, spotlights, and flashlights. 

Having these will ensure the safety of everyone on board. Wholesale Marine has an extensive line of marine lighting for all your nighttime boating needs. Our boat light inventory includes a wide selection of LED, Xenon, Halogen, and Incandescent lights for various courtesy, navigational or underwater uses.

While Wholesale Marine carries an extensive line of LED lighting for boats and yacht lighting. We offer marine lighting fixtures from top brands like Attwood, Rigid Industries, Sea Dog, TACO Marine, and T & H Marine. These brands provide lighting and accessories for every situation. Our easy to use online parts finder makes finding the boat lights you need a breeze.

Our marine lights are manufactured and engineered to be corrosion resistant and made to the highest standards. Each light or light kit is easy to install. Many of our lights are LED with a proven LED electrical design and functionality. Wholesale Marine carries high quality LED marine lighting.

Marine Lighting for all Places

The safety of you and your passengers is no accident. Well-positioned boat courtesy lights can illuminate low ceilings or can be positioned to eliminate tripping hazards. Sea Dog's  Utility LED Courtesy Light is a great surface mount light for your galley or even your deck. Constructed from delrin material, these bright led boat lights are excellent as a counter or step light.

At some point, docking your vessel at night will be unavoidable. Boat dock lights and navigation lights are an easy to use solution to avoid damage and dock your craft. Illuminate blind spots with the Anderson Halogen Boat Docking Light Kit . These powerful 55W lights are housed in a tough black housing with hardened glass lens

When visibility on the water is low, ensure that you have the right marine navigation lights installed from Wholesale Marine. From yachts, to cruisers, small boats, PWC's or even kayaks we offer a variety of portable navigation lights. Side lights such as the  Perko Vertical Mount Side Light are equipped with a red and green marine navigation lights.

Boat spotlights help provide smoother navigation when taking your boat out at night, and every boat should have a spotlight and flashlight on board. For smaller vessels, the Jabsco 135 SL RC Searchlight is a mounted spot light comes with a remote control and 15’ of cable for easy installation.

Even if you are an avid boater, you may not be familiar with boat spreader lights. These are essentially courtesy lighting that originally had been mounted to the spreaders on a sailboat mast, hence the name. Need an economical solution? We suggest  Sea Dog’s Halogen Flood Light .

Underwater Boat lights are a great way to accessorize and add aesthetic appeal to your boat, help anglers when fishing, and also provide additional safety. The Attwood Light Armor Underwater 3-LED Light is easy to install and designed to perform in the harshest conditions.

Stern lights not only provide extra lighting for safety, but also can extend recreation time when out for a day of boating, for fishing, or for night runs. Stern light bases can be easily installed to update and upgrade existing watercraft as needed. For smaller craft, consider Attwood’s economical 3-Pin Round Straight Pole Base .

Our boating specialists are here to help you Monday through Friday from 8:30 AM until 4:30 PM EST at 877-388-2628. We are here to assist you with all your boat lighting needs. We also offer the Captain's Club Rewards program for points that can be used towards future purchases. Most orders have same-day shipping. Order today.

Oops, something went wrong. Please try again.

You are now logged in!

Best LED Navigation Lights

Last Updated by

Daniel Wade

May 3, 2023

‍ Key Takeaways

• Navigation lights offer safety to you and other boaters
• You must understand how boat navigation lights rules are important
• Bow light and stern light are red and green respectively
• Pontoon boat navigation lights are similar to other marine navigation lights and their use
• The best boat navigation lights will vary based on a variety of factors to you

‍ Boating at night requires proper lighting in order to ensure safe travels. So what are some of the best LED navigation lights?

Brands such as Shangyuan, Linkstyle, Partsam, and Obcursco make high quality LED boat navigation lights. Each brand will have a variety of factors that make them the best LED boat navigation lights such as price, quality of materials, and a super bright light.

In my years of experience some brands are definitely better than others. Price appears to be a driving factor but keep in mind what the boat lights intended use is for and how it applies to your situation.

Table of contents

‍ The Top 12 Best LED Boat Navigation Lights

Using LED boat lights is a smart choice for those who frequently sail or engage in open water activities. These are especially needed to obtain sufficient lighting for both the interior and exterior of their boat during night or dawn trips.

Partsam LED Lights

The Partsam round chrome light is a waterproof LED boat navigation light that doubles as an interior boat cabin light. It is made from top chrome bezel and high-grade plastic that make it durable and lightweight.

It comes with mounting screws and is easy to install with its flush mount. It is also compatible with 12 volt DC power.

• Waterproof and durable against all elements
• Can be used in both interior or exterior of your boat
• Installation is easy and it is super bright
• Not meant to be submerged especially in salt water
• Cannot dim the lights

Shangyuan Boat Navigation Lights LED Strip

The Shangyuan LED boat running lights are versatile and reliable for use all over the boat. These are especially used for:

• Stern lights
• Starboard and port sides

These LED boat navigation lights are ideal for small boats, kayaks, pontoons, and sailboats. The 3.8-inch LED strips are green for the starboard side and red for the port side. They meet maritime requirements and are battery-powered.

These running lights can withstand harsh marine conditions and provide exceptional brightness and performance. The slim ABS casing needs careful screw tightening to avoid cracking. They are easy to install and durable even in harsh environments during hunting and winter seasons.

• Be seen on the water with proper navigation lights
• Energy efficient
• Overtightening the screw can damage light casing
• Meant for small boats

Obcursco LED Navigation Lights Kit

Obcursco makes a great boat navigation light kit. This LED navigation light is perfect for low light settings and rough weather with a 12v DC power and IP67 waterproof rating.

It is corrosion-resistant and impact-proof thanks to the ABS material while tightly sealed LEDs ensure full waterproofing. With easy installation using 3M adhesive it is a versatile option for boats and land use alike.

• Easy to adjust lights
• Waterproof and has durable materials
• Easy to install
• Might need to glue the lights in addition to the 3M tape
• Does not include instructions

Linkstyle Marine Boat Navigation Lights

Linkstyle's marine LED boat navigation lights are a durable and versatile option for various boat types. Its corrosion-resistant design features waterproof red and green LED units, an ABS plastic casing with a stainless steel enclosure, and polycarbonate-lenses lamps.

The lightweight and easy-to-install design is ideal for hunting and fishing. The 225-degree mounting angle ensures maximum luminance and safety compliance. These IP65 waterproof safety lamps use 16 LED bulbs powered by a 12V battery to widen visibility during reduced visibility conditions.

• Lightweight and durable to outdoor marine conditions
• Easy installation
• Ideal for smaller boats
• Installing wrong may cause navigation issues
• Not meant for larger boats

OPT7 Aura PRO LED Kit

The OPT7 Marine LED Kit is for hassle-free and waterproof boat lighting. It features SoundSync bass-activated technology, a handheld remote, and one-touch color selection with advanced dimming options.

The kit contains four LED strips, connectors, extension wires, power harness, mounting kit, and other accessories. This beats looking for everything individually but the price point might deter some buyers wanting a simple setup.

• Super bright lighting
• Easy to install and plug into 12 volt power
• Comes with remote and various light features
• Remote is not the best quality
• Might be overpriced for those wanting a simpler LED kit

Interwebz Boat Bow Navigation

Interwebz has waterproof LED bow navigation lights in red and green for boats that can be connected to a 12-volt battery or a standard pole. Proper labeling is required for night trips.

It has stylish mounting options for the boat's rub rail with a black cover that blends in with the exterior surfaces. Suitable for various boats such as bass, ski, and fishing boats, the lights are weatherproof with an IP68 rated silicone casing.

• Easily seen lighting
• Has six foot cord to connect anywhere on the boat
• Great weatherproof rating
• Likely have to use marine grade silicone to keep it secure

PryEU Daylight White

The PryEU Daylight White 6000K is an energy-efficient and versatile waterproof lighting fixture that uses 3M double-sided foam tape for secure attachment. It has a 12v DC voltage compatibility and consumes only 1.5 watts and makes it ideal for marine interiors and other spaces.

Installation is easy but it involves surface cleaning and sticking it to the adhesive backing. A three year warranty plus 60 days replacement and fast delivery with customer support are provided by the manufacturer.

• Excellent energy efficiency
• Solid waterproof rating
• Easy to install and has three year warranty
• Might need silicone to help make it stay
• Lights cannot be dimmed

Amzonly LED Navigation Lights

AMZONLY LED boat navigation lights are a versatile and top-rated kit with red and green LEDs for the bow and port side and white for the stern. They have three flashing modes and a magnetized screwdriver for easy battery changes.

This IPX5 weather-resistant light kit comes with four LEDs, 12 3-volt batteries, three elastic straps, one long armband, and a 12-month return policy. This is suitable for kayaks, yachts, motorboats, and pontoons and they can be used as a flush mount navigation light, masthead light, taillight, running light, or flashing light.

• Easy to install kit with everything you need
• One year return policy
• Solid waterproof and weatherproof capabilities
• Not intended to be submerged or soaked

Leaningtech LED Boat Navigation Lights

The LEANINGTECH Marine LED is a waterproof and adaptable lighting choice for boats that is known for its brightness, energy efficiency, and USCG compliance. Its durable construction from ABS plastic and chrome plaid zinc ensures both lightweight and waterproof properties with an IP65 rating.

It can serve various purposes that as a source of lighting for different types of boats. It can also serve as a bow, running, or stern light.

• Great brightness
• Easy to install and is made from quality materials
• Has multiple functions for use
• Gauge for wires is a bit small
• Some reports say it did not hold up well in salt water conditions

Osinmax Boat Navigation Light

The Osinmax LED boat navigation lights is a top-rated energy-saving set that uses a 3W LED bulb and 12V DC power. With green and red lenses it offers masthead-like running lights that ensure you will be seen up to two miles.

The housing is waterproof with an IP67 high-density seal ring made of foam silicone rubber that helps prevent short circuits from splashes. The lights comply with maritime navigation, wildlife, and fisheries regulations, and install easily with one screw.

• Low power consumption and is super bright
• Designed to keep water out
• Can be used as courtesy lights
• Might need to add silicone to adhere the back side
• Might be difficult to install on some boats

Lumitec SeaBlazeX Boat Navigation Lights

To attain premium illumination you should opt for the Lumitec SeaBlazeX LED with 12-24V DC power that emits 4,000 lumens. Its marine-grade bronze housing enables convenient flat surface installation.

It offers versatile programmable features such as cross-fade and strobe. Perfect for subaquatic use, preventing discoloration, it is available in blue, green, white, and white/blue hues.

• Durable in salt water conditions
• Solid underwater submersion capabilities
• Bright lights in various colors
• Cannot dim lights
• Somewhat expensive compared to similar brands

Five Oceans Boat Navigation Lights

Boaters prefer Five Oceans' marine LED boat navigation lights for clear visibility up to two miles. These dual-function green and red lights serve as stern, flushing, and bow lights.

They are made of lightweight ABS plastic and alloy covers.They are also brighter and longer-lasting compared to other boat navigation lights.

These low-tension safety lights connect to a 12V power source for energy efficiency and superior visibility. With a UV-resistant feature and a lifespan of about 50,000 hours they are top choice. No additional sealing is required thanks to their rubber seal.

• IP66 protection and endure splashes
• Easily install the 3W bi-color LEDs at a 225-degree angle using the included screws
• Bright boat navigation lights that can be seen two miles away
• Does not look as appealing as other boat navigation lights

What to Expect from LED Boat Navigation Lights

To simplify your selection process when looking for LED lighting fixtures to accessorize, you will need to research a variety of factors based on your needs. If you wish to upgrade or replace your boat navigation lights here are some key factors to consider.

Lighting Capability

LED lights have evolved to meet diverse lighting needs with some producing clear white light and others providing brightness from any direction. Lumens is the term used to describe the amount of light generated by a particular brand of LED lights.

Angle of the Lights

To avoid eye damage it is crucial to factor in the beam angle when purchasing LED boat lights. Read reviews from past customers to gauge the intensity of the light directed at you or from an angle. Strong LED lighting fixtures can harm your eyes so be cautious.

Energy Efficiency

Comparing the percentage of energy needed to produce sufficient light is crucial when selecting lighting fixtures such as LED lights. Higher lumens per watt make LED lights more cost-effective in terms of energy consumption.

Red Light Output

Excessive heat generation in boat LED lights is a significant concern for buyers. To ensure optimal lighting quality it is crucial to consider the heat output of the chosen LED light.

Ease of Installation

Multiple installation techniques for navigation lights cater to different boating needs but mount components should be ensured for both wired and battery-operated choices. Mounting options range from screws to armbands.

Wired lights are recommended for safety while small boats can benefit from the versatility of battery-operated LED lights. The chosen installation method impacts functionality, service life, and safety, ultimately safeguarding lives and property.

LED light prices will vary depending on select features such as materials used and the manufacturer's design availability. Choosing a manufacturer depends on the buyer's budget and preferences for the intended use of the boating adventure.

Customized features and extended warranty may result in higher prices. To obtain the finest LED light bargain you should scrutinize LED boat lighting warranties that typically span from one to seven years. Do not settle for one that is the cheapest option since it might not suit your intended use or last as long as you may hope.

Quality Materials

To ensure the longevity of LED lights it is crucial for prospective buyers to consider the material used. If the material is prone to rust then the light will eventually corrode.

Always check the manufacturer's material-composition and avoid products made primarily of alloy coating. You should for opt for a top-grade metal or alloy material from a reputable LED light brand.

Your lighting source must be tightly sealed and capable of withstanding harsh weather and moisture. When using LED lights for marine and saltwater expeditions, verify the IP rating.

Look for an IP67 rated LED product. This means it confirms its ability to endure any weather conditions and even some underwater submersion.

Why You Need LED Boat Navigation Lights

LED navigation lights offer numerous benefits. They primarily are designed to allow safe transport on the waterways so that other boats can see you.

Choose quality LED lights for greater energy efficiency and significant cost savings compared to incandescent bulbs. LED lights have diverse uses on land and sea, being useful for lighting homes, businesses, and buildings.

Marine LED cabin lights have become popular as decorative lighting inside homes, while others use LEDs for entertainment, transportation, spotlighting, or reading. LEDs are considered essential lighting tools in any setting.

Other reasons to have efficient ones include:

• Easy installation and durable marine-grade construction
• Versatile performance options based on different brands
• Improved visibility for boat status and navigation
• Helps prevent accidents caused by extreme weather and reduced visibility
• Retain compliance with wildlife and marine laws
• Multiple usage options in other marine applications

Differences in LED Boat Navigation Lights

The boat light packaging is compact upon delivery and LED lights operate similarly to incandescent bulbs. They are initially designed for lighting boats but a lot of these lights now serve multiple purposes and come in various types.

• Navigation: Are essential for indicating the position and direction of sea vessels. Usually with red and green lights in addition to white.
• Anchor: The anchor light serves to locate and signal the presence of a docked vessel
• White: Provides adequate lighting all around the boat
• Deck: These lights offer lighting in areas that you walk through often
• Dock: Serve as bright illumination for boaters or mariners during departure or arrival at a marina
• Underwater: These are submerged or placed near water to lure sea creatures during nighttime fishing expeditions.
• Search: Search lights are essential for boat users to locate objects on deck or in water.

Which Colors Do You Need for Your Boat?

Boat navigation lights consist of red sidelight for port side and green sidelight for starboard side. White lights serve as anchor, masthead, or stern lights.

If you cannot remember how to tell the two apart you can always think of port red wine. There is a saying that you can easily remember such as “there is no red port wine left”. This way you do not have to worry about the starboard side since it works itself out in the phrase if you can remember the port side.

Navigation lights are unnecessary for illumination during normal boat motion except in low visibility conditions. If you decide to use other lights on your boat make sure that they are not in use during lower light conditions so that other boaters are not confused by your setup.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Most Recent

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Popular posts.

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

Burns Brighter. Lasts Longer. Built Tougher.

• Looking for Something? QUICK FIND
• --> 800-847-1359
• Need Help? Call Us: 800-847-1359

Your shopping cart is currently empty.

Hi-Performance Super Bright LEDs for RVs, Semi-Trucks, Wreckers, Motorcycles, Boats, Golf Carts, Cars and More!

Marine LED Light Kit

Check out the Lighting Builder for a more customized experience.

Leave a Review

Led light kit for boats.

Light up your boat with a Boogey Lights® LED light kit! Designed specifically for outdoor use this LED light kit is incredibly bright. Our low profile hi-intensity LED strips are perfect for mounting just about anywhere in a boat that isn't submerged. They produce a smooth, even glow of light to give your boat that custom look. Our LED light kits provide both functional lighting as well as decorative, accent LED lighting.

PRODUCT HIGHLIGHTS

Available in eight different single colors and three multi-color configurations. The base Pontoon Boat LED light kit consists of two, 4' LED strips each with a 15' power lead on your choice of Black or White PCB.   You can control the lighting with the included RF hand-held wireless remote or use your bluetooth enabled smartphone and our free IOS or Android APP. Powered by 12vdc. IP65 rated. Not intended for use under-water. If mounting in an area where lights will be exposed to salt water, we recommend mounting in a protective channel such as our Mini T-12 aluminum channels and diffusers. 

AVAILABLE OPTIONS

LED Color : Select the LED color you want from the drop down box. There are eight possible single color options (Red, Green, Blue, White, Orange, Amber, Pink, Magenta) and three multi-color options (RGB, RGBW, RGBA). Selecting the LED color option will adjust the available options you can select based on your color selection. See CONFIG tab for more detail on the multi-color options.

Controller Configuration: Select the type of LED strip and switch/controller combination you want from the drop down. Note that our controller options all offer our new GEN2 (G2) LED controller. See CONFIG tab for more details on these options.

Kit Configuration: Select the LED strip lengths from the drop down. See CONFIG tab for more details on these options.

PCB Color: Select BLACK or WHITE PCB. Details on why this might be important to you are below. Note: RGBW, RGBA and RGBWW are only available in Black PCB.

Optional - Add Extra 3M Adhesion Primer: All of our lighting kits come with 3M adhesion primer sufficient to do the installation. Some folks however prefer to order extra; just in case.

LENGTH CONSIDERATIONS

The maximum length of a single LED strip is 16'. The laws of electricity won't allow it to go longer with today's LED 12vdc technology without sacrificing brightness and durability. If you want to go longer than 16' (e.g. 20'), you have two options. One is to simply center the 16' LED strip in that 20' space. Boogey Lights are already very bright so for most folks, having enough light is never a concern. That said, some prefer to have full coverage of the entire 20' area. In that case it's possible to cover that entire 20' span using two LED strips. In the case of a 20' span you could use the stock 16' and add a 4' add-on led strip . Or, order two - 10' LED strips.  Regardless of how you break up the 20' span, the two LED strips (totalling 20') are installed such that the two LED strips butt together; end to end, which gives the illusion of a single 20' LED strip. Both power leads will need to be routed back to the LED controller or power source.

For shorter lengths, use the KIT CONFIGURATION drop down box which offers these lengths: 16', 14', 12', 10', 8' and 4'. Regardless of the length, each led strip includes a 15' power lead hard wired to one end of the LED strip. There are no connectors. Single color LED strips have 2 conductor power lead. RGB has 4 conductor power leads. RGBW and RGBA have 5 conductor power lead. Single Color and RGB led strips are 3/8" wide (10mm). RGBW and RGBA are 1/2" wide (12mm). All are 1/8" high/thick. Be sure to click on the CONFIG navigation tab on this product page. It includes details and explanations for all of the options offered on the LED COLOR and the KIT CONFIGURATION drop down boxes.

SINGLE ZONE OR DUAL ZONE?

This kit offers both SINGLE ZONE and DUAL ZONE controller options. As the names suggest, a Single Zone controller has just one single lighting zone. All LEDs wired to the controller are on one zone. Whatever color or feature set you apply will be what you get on all leds. Pretty simple. With our Dual Zone controller, you can set up and operate two distinct lighting zones which can be operated and controlled individually or together. With the Duty Dual Zone LED Controller you have more flexibility as to how you want to control your Boogey Lights. On a Dual Zone controller each lighting zone is capable of supporting up to 1500 LEDs for a total of 3000 LEDs. It will work with your Android® or iOS® Smartphone. It will also work with the included M7 Style RF wireless remote. Details on features are below.

LED CONTROLLER FEATURES

Bluetooth + rf combo wireless control.

The LED Controllers offered in this kit are our GEN2 Single Zone and Dual Zone Heavy Duty Bluetooth COMBO LED Controllers. COMBO means they can be operated using either the included M7 RF wireless hand held remote OR your Bluetooth enable smartphone (and our free APP). Both will work. The RGB version is capable of displaying 16 million different color combinations. The GEN2 RGBx version can display even more color combinations depending on the type of LED strips connected to them. In addition, lighting effects on the Bluetooth controller are significantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smartphone screen so you can adjust the speed and intensity to get the lighting the way you want it.

Key Features & Capabilities

• Our GEN2 LED Controllers are based on the Bluetooth 5 chip set family which provide fast response times and the best possible RF/Bluetooth transmission distance.
• The SUPER and HEAVY DUTY GEN2 Controller can support Single Color, RGB, RGBx and RGBxx LED strips with both RF and Bluetooth control.
• The HEAVY DUTY controller versions include two antennas: a screw-on 2" stubby antenna and an extended magnetic mount antenna with 15' of wire for optimal reception on any vehicle.
• Use the included RF wireless remote to quickly turn on/off/dim your Boogey Lights. You can also select up to 7 different preset colors using the RF remote as well as access 7 different lighting features.
• Use your smartphone to operate your Boogey Lights®: On, Off, Dimming, Color Selection, Brightness, Speed, Color Programming, Timers
• Adjust the color sliders or color square to select the color you want.
• Access additional lighting features (e.g. strobing, flashing, breathing, morphing) modes using the 7 Function Keys.
• Save your favorite lighting configuration using Pre-Sets
• Countdown Timer and a 24 hour On/Off Timer function
• Quick-Switch feature for use with RGBx LED strips.
• Password protection to stop others from connecting to your LED controller.
• Programmable Color Rotation mode offers the ability to program the controller to display two or three colors of your choice and then rotate those colors in sequence.
• Assign a 'nick name' to your controller so you can easily find it when scanning.
• Set the APP to auto-connect to your LED controller every time you launch the APP on your phone
• DOWNLOAD the GEN2 LED Controller Operating Manual & Wiring Diagrams
• DOWNLOAD the GEN2 Bluetooth Operating Manual
• DOWNLOAD the GEN2 M7 RF Wireless Remote Operating Information
• VIEW the GEN2 LED Controller Series Product Page
• VIEW the GEN2 BLUETOOTH APP Information Page

COLOR OPTIONS & CONSIDERATIONS

This light kit is offered in eight single color options and in three multi-color configurations: RGB, RGBW (RGB + warm white) and RGBA (RGB + amber). For the single color options the LED controller wireless RF remote will give you the ability to turn the LEDs on/off as well as dim, flash, strobe and breath (and change the speed at which those features work). With the bluetooth APP, you can perform these same functions as well as save presets. For the multi-color options, you have the same capabilities however the feature set is significantly expanded since you also have the ability to change/adjust/tweak the colors you want to display. With the included RF wireless remote you can change between 7 pre-set colors (Red, Green, Blue, White, Light Blue, Lime Green/Yellow, Hot Pink/Purple) and functions of on/off, blending, strobing, breathing, flashing, fading and dimming. You can also use your Bluetooth enabled smart phone to create a custom look. The Bluetooth APP allows you to program the RGB diodes of any of our RGB, RGBW and RGBA strips with over 16 million different color combinations plus three pre-sets. Also, the Bluetooth APP offers 2 and 3 color rotation programming along with two timer features. Click the BLUETOOTH APP navigation tab on this product page for significantly more information on both the Bluetooth capabilities and APP functionality (including a video showing how the Bluetooth APP works)

RGBW: On the RGBW led strip, in addition to RGB, you get one extra diode which is Warm White. That warm white diode has a Kelvin temperature of 2400 which means it has a yellowish look giving it a warmer, softer, candle like look (see photo below). That fourth diode on the RGBW led strip can be wired directly to our GEN2 LED Controller which supports RGBx LEDs. As an option, you could also wire that fourth diode to a completely separate on/off switch. Your choice. You could also use the Quick-Switch feature with this fourth diode too.

RGBA: On the RGBA led strip, in addition to RGB, you get one extra diode which is AMBER. That fourth diode on the RGBA led strip can be wired directly to our GEN2 LED Controller which supports RGBx LEDs. As an option, you could also wire that fourth diode to a completely separate on/off switch. Your choice. You could also use the Quick-Switch feature with this fourth diode too.

Using the Quick-Switch Feature . The Quick Switch feature is available on our GEN2 SUPER, HD SINGLE ZONE and HD DUAL ZONE LED Controllers.  Whatever color LED you have connected to the GREY output wire of the GEN2 Controller is the color that will display when the Quick Switch is triggered with 12vdc +.  The most common use for this configuration is with commercial vehicles who want to be able to instantly turn off whatever color they're running and turn on a DOT compliant AMBER which is on our RGBA LED strips but it could be used for other applications too. For these installations, the yellow trigger wire is connected to a toggle switch or other wireless switch that activates the AMBER leds.   You can also do the same thing with the RGBW product.   When the Quick Switch trigger wire is not energized, the LED controller operates the RGBxx diodes normally.

USING 3M ADHESION PRIMER

To achieve the full adhesive strength of the 3M® tape affixed to the back of each strip 3M® Adhesion Promoter (aka Primer) must be applied to the mounting surface first. This is an important step to ensure a secure bond . The 3M® Adhesion Promoter creates a chemical bond between the tape and the mounting surface such that the LED strip will stay stuck (at least until you decide you want to remove it). Using any other solvent such as rubbing alcohol or acetone is not the same thing as using 3M® Adhesion Promoter. While these solvents will help clean the surface, they do not prime the surface. There is a difference. 3M® Adhesion Promoter is included with this kit although you may elect to purchase more if you'd like.

OTHER ITEMS YOU MAY NEED

No two installation scenarios are the same. Not everyone shares the same installation quality goals. Some folks are OK with twisting wires together, others want to solder them. Some folks are OK with running wires where they may be seen or unprotected to save money/time, others want a tidy, clean install without any wires showing. Some folks are OK with mounting their LED strips to whatever surface they can find, others want to take the time necessary to build out appropriate mounting surfaces to provide the best lighting effect on their vehicle. The point is it's not possible to provide all the materials necessary for all installation scenarios and quality goals. Our light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider THESE OTHER ITEMS .

Will Boogey Lights® Work with Other Brands?

The short answer is probably not. All Boogey Lights® RGB LED strips are COMMON CATHODE LEDS. They share a common ground and will only work with positively switched controllers. Most LED strips on the market today are COMMON ANODE because the controller technology used to power them is less expensive to manufacture. However they're not nearly as bright and are an overall inferior design when compared with COMMON CATHODE LEDs. For more information, click the button below.

NOTE: Warranty is void if used under-water or in salt-water environments.

WHY BOOGEY LIGHTS®?

Unlike most every other light kit out there, these light kits are ACCENT LIGHT KITS. When mounted properly, you'll never see the LED lights themselves. You'll only see the glow from the LEDs. If you're interested in learning more about WHY Boogey Lights are different than any other LED lighting system on the market, click here: WHY BOOGEY LIGHTS . We do a deep dive into the ten differences between Boogey Lights® and all the others.

Product Configuration Options

This product offers our new GEN2 family of LED Wireless Controllers. It's called the GEN2 or simply the G2 LED controller. These new G2 LED controllers have the same capabilities as our GEN1 LED controllers along with some new features, capabilities and design improvements. You can read more about these new features on our GEN2 COMBO LED CONTROLLER product page. You'll see these new G2 LED Controller being offered in the CONTROLLER CONFIGURATION drop down of this product page. The GEN2 controller can power single color, RGB, RGBx and RGBxx LEDs.

LED COLOR OPTIONS

This LED light kit is offered in eight single color options and in the following multi-color configurations: RGB, RGBW (RGB + warm white) and RGBA (RGB + amber). Single color simply means the LED strip is one color all the time. The color cannot be changed. The color you choose is the color you get. Multi-color means you can change or select different colors. All of the multi-color RGB options require an LED controller to operate. The advantage of RGB over a single color LED strip is that RGB gives you the ability to change colors as well as access other features such as dimming, flashing, breathing and color blending. With the bluetooth interface, you can save favorite color/feature sets as well as program 2 or 3 color rotation sequences. More detail about these advanced features can be found on the product page. With RGB you can choose between 7 (using the hand held wireless remote) and 16 million (using the bluetooth APP) different color combinations. RGBW includes all of the RGB colors and capabilities plus the addition of a warm white diode (2400 kelvin temp). Warm white is often referred to as a 'candle white' or 'soft white'. RGBA includes all of the RGB colors and capabilities plus the addition of an amber diode. Amber attracts fewer bugs than white. It's also not nearly as bright; easier on the eye at night which some folks prefer. We have included a photo of these different color temperatures of white on the main product page. Make your selection from the LED COLOR OPTION drop down.

CONTROLLER CONFIGURATION OPTIONS

The LED Controller Configuration Options offers the following SINGLE COLOR and MULTI-COLOR controller options as follows:

Single Color: No switches or controller. Select this option if you want a single color led strip (e.g. can't change colors -- just one color that you select from the LED Color option drop down) and you already have a means by which to switch the light on/off. Just be aware of the amperage draw. As a point of reference, single strip of 300 white leds will draw about 3.3amps on full brightness. All other colors will draw less.

Single Color: Single Zone. Select this option if you are ordering a single color led strip (e.g. can't change colors -- just one color that you select from the LED Color option drop down). This controller will power up to 1800 LEDs (max of 20 amps) all on one single zone. This controller is both RF wireless + Bluetooth capable. The RF wireless M7 style remote is the most popular because of it's large, easy-to-use and see buttons. It measures 3.5" x 1.5" x .25". With either the included RF wireless hand-held remote or Bluetooth APP you have the following features with single color LEDs: on/off, dimming, fading, breathing and strobing. With the Bluetooth APP you can also save presets. This controller is 5.5" long x 3.25" wide and 1.5" high. Note that the overall length to accommodate room for wires is 7.5".

Single Color: Dual Zone. This controller offers the same functions and features as the single color single zone controller mentioned option above but it's a DUAL ZONE LED Controller. There are two distinct lighting zones. This controller will power up to 3000 LEDs with a max capacity of 1500 LEDs per zone (20 amps max per zone). Common reasons customers prefer the Dual Zone controller over the Single Zone controller is they wish to segment their under-glow system include two segments. Eg. Drivers side on Zone 1. Passenger's side on Zone 2. This controller is 5.5" long x 3.25" wide and 1.5" high. Note that the overall length to accommodate room for wires is about 10".

Multi-Color: Single Zone. Will work any of the multi-color LED strips offered (e.g. RGB, RGBA or RGBW). This controller will power up to 1800 LEDs (20 amps) all on one single zone. This is a COMBO LED Controller in that it includes both an M7 style RF wireless hand-held remote and Bluetooth integration. This LED controller can be used with any of our RGB LED strips including the RGB, RGBW and RGBA. If using it with RGBW or RGBA, the W or A diode will need to be controlled by some other mechanism; often a simple on/off switch or another LED controller. For more information on how to wire an RGB LED controller to RGBW or RGBA leds, click on the link below. With the included RF wireless hand-held remote you can change between 7 colors (Red, Green, Blue, White, Light Blue, Boogey Lights Green (lime green/yellow), Hot Pink/Purple) and functions of on/off, blending, strobing, breathing, flashing, fading and dimming. You can also use your Bluetooth enabled smart phone to create that custom look with over 16 million different color combinations plus three pre-sets and color rotation programming functionality. See additional details (with video) and it's capabilities on the APP navigation tab appearing on this product page. With both an RF wireless remote AND bluetooth integration, you get the best of both worlds. This controller is 5.5" long x 3.25" wide and 1.5" high. Note that the overall length to accommodate room for wires is 7.5".

Multi-Color: Dual Zone. This controller offers the same functions and features as the multi-color single zone controller mentioned above but it's a DUAL ZONE LED Controller. There are two distinct lighting zones. This controller will power up to 3000 LEDs with a max capacity of 1500 LEDs per zone (20 amps max per zone). Common reasons customers prefer the Dual Zone controller over the Single Zone controller is they wish to segment their under-glow system include two segments. Eg. Drivers side on Zone 1. Passenger's side on Zone 2. Another example is if you're buying the RGBA or RGBW LEDs. Zone 1 is wired to the RGB diodes and Zone 2 is wired to the A (or W) diode. One controller will then operate both the RGB and the A (or W) diodes. This controller is 5.5" long x 3.25" wide and 1.5" high. Note that the overall length to accommodate room for wires is about 10".

KIT CONFIGURATION LENGTH OPTIONS

The default length of a single LED strip is 16', which contains 300 super-bright tri-chip LEDs. You can cut the LED strip every 3 LEDs if you need to. If you want to go longer than 16' (e.g. 20'), you have two options. One is to simply center the 16' LED strip in that 20' space. Boogey Lights are already very bright so for most folks, having enough light is never a concern. That said, some prefer to have full coverage of the entire 20' area. In that case it's possible to cover that entire 20' span using two LED strips. In the case of a 20' span you could use the stock 16' and add a 4' add-on led strip . Or, order two - 10' LED strips. With this product you can order any LED length from 3" to 16' (in groups of 3 LEDs) as well as different power lead lengths. Regardless of how you break up the 20' span, the two LED strips (totalling 20') are installed such that the two LED strips butt together; end to end, which gives the illusion of a single 20' LED strip. Both power leads will need to be routed back to the LED controller or power source. For shorter lengths, use the KIT CONFIGURATION drop down box which offers these lengths: 16', 14', 12', 10', 8' and 4'. Regardless of the length, each led strip includes a 15' power lead hard wired to one end of the LED strip. There are no connectors. Single color LED strips have 2 conductor power lead. RGB has 4 conductor power leads. RGBW and RGBA have 5 conductor power lead. Single Color and RGB led strips are 3/8" wide (10mm). RGBW and RGBA are 1/2" wide (12mm). All are 1/8" high/thick.

Extra 3M Adhesion Primer

3M Promoter is a powerful adhesion primer. It's an essential step in the installation process but you don't need much of it to make it work. A simple single swipe on the surface you're mounting the light strip to is all you need. Our lighting kits include enough 3M Adhesion Primer to mount the strips in the kit for most installations. Some customers however feel better if they "paint" the mounting surface completely with it -- which is fine if you want to but not necessary. The problem is that 3M Adhesion Primer isn't readily available everywhere; particularly weekends, holidays and evenings. If you use all of the primer that's included with the kit but run out before you're finished, you'll have to wait to finish the job until you get more adhesion primer. If you're one of those people who would prefer to have a little adhesion primer left-over just in case, we offer the option of adding an additional bottle to your order.

SUGGESTED PLACEMENTS

• Install this LED light kit anywhere you want to light up your boat. Common locations are in the cockpit, under the gunwales or under the bimini. If you need to cut the strip to fit you can. Just make sure you cut where marked.
• Optional - Add additional 2', 4', 8' or 16' strips as needed across the bow, stern, under the bimini or in the cockpit to accent other areas of the boat.
• Optional - Add HEAVY DUTY LED STRIPS (IP67 rated) to areas that are submerged for brief periods of time or might be subject to direct impact.

INSTALLATION TIPS

Depending upon the mounting surface of your deck you may need want to consider using ALUMINUM CHANNELS . They make for a smooth installation as they can easily be screwed to the decking surface and then attach the light strips to them.

• WE STRONGLY SUGGEST BENCH TESTING YOUR LIGHTS AND CONTROLLER BEFORE MOUNTING!  We cannot emphasize this enough.  Probably 95% of all calls we receive from customers are about problems or issues that could have easily been avoided had the customer taken the extra 15 minutes to bench test their lighting setup before installation.  Not only does bench testing give you an opportunity to understand the configuration, it also will flush out any problems or misunderstanding about the product and use before mounting.  
• Make sure you know where your electrical connection will be and how you are going to route the power leads from the power source to your LEDs.
• The only way to ensure the LED light strip stays stuck is to make sure you prepare the surface in accordance with the directions. Every LED light kit we sell includes 3M promoter (aka "primer"). It's absolutely critical the surface be prepared using this special 3M promoter and that you follow the directions provided with every light kit.
• If you need to cut the LED strip, make sure you do it before affixing to your vehicle. Our LED strips can be cut every 3 LEDs and are clearly marked.
• When in doubt, call our technical support team! We're the experts. Since 1989 we've done this thousands of times. We know what works.

Need additional assistance? Give us a call and we'll be happy to assist!

FREE SHIPPING ON ALL ORDERS OVER 50*

FATHER’S DAY SALE | 10% OFF SITEWIDE | AS LOW AS 0% APR FINANCING WITH AFFIRM | USE CODE FDAY10

• 1.877.533.4569
• Product Help Center
• Mon - Fri: 9:00 AM - 5:00 PM EST

1.877. LED .GLOW 1.856.768.5700

Mon-Fri 9:00 AM-5:00 PM EST

• Bluetooth Underbody Kit
• Multi-Color Underbody Kits
• Single Color Underbody Kits
• Replacement Parts
• Shop All Underbody Kits

• Bluetooth Interior Kit
• Multi-Color Interior Kits
• Single Color Interior Kits
• Shop All Interior Kits

• Wheel Well Kits
• Wheel Ring Kits
• Shop All Wheel Kits

• Running Board Lights
• Tailgate Light Bars
• Truck Bed Lights
• Tool Box Lights
• Shop All Accessory Lighting

• Shop All Truck Underbody Kits

• Litetrike Kits
• Slingshot Kit
• Can-Am Spyder Kit
• Can-Am Ryker Kit
• Kit Upgrades
• Shop All Motorcycle Kits

• Shop All Golf Cart Kits

• RV CAMPER LIGHT KIT

• Underbody Kit Upgrades
• Interior Kit Upgrades
• Accessory Lighting
• Bluetooth Motorcycle Kit
• Multi-Color Motorcycle Kits
• LiteTrike Kits
• Motorcycle Kit Upgrades
• Multi-Color Underbody Kit
• Add-On Accessories
• Dirt Bike Kit
• Snowmobile Kit
• Shop All Powersports Kits
• Shop All RV Lighting
• Multi-Color Marine Kit
• Blue Red Green White
• Shop All Marine Lighting Kits
• Shop All Engine Bay Kits
• Home Theater Kit
• Storefront Kit
• Car Underbody Kit
• Truck Underbody Kit
• Car & Truck Interior Kit
• Motorcycle Kit
• Shop All Limousine Lighting
• Shop All Install Accessories
• Million Color Parts
• Single Color Parts
• Advanced 3 Million Color Parts
• Slimline Parts
• Expandable Interior Parts
• Flexible Million Color Parts
• Advanced Million Color Parts
• Advanced Single Color Parts
• Wheel Well Parts
• Wheel Ring Parts
• Truck Bed Kit Parts
• Tool Box Kit Parts
• Running Board Kit Parts
• Engine Bay Kit Parts
• Home Theater Kit Parts
• Storefront Kit Parts
• Shop All Brand Apparel
• Shop All Open Box
• Shop All Clearance
• Track Order
• Returns & Exchanges
• LEDGlow Reviews

Stay Connected

LED Boat Lights

LEDGlow accent lighting kits look great on boats too! See what an LEDGlow Marine Light Kit can do for your maritime vessel by adding radiant and eye-catching LED lighting, available in either single color or multi-color kits. Add these ultra-bright tubes and select from a variety of different mounting choices such as deck lights or rail lights mounted under your gunnel. Thanks to these transformative and stylish light kits, your boat will take on a completely new look and feel that is sure to make you stand apart from fellow boating enthusiasts when docked in the marina or out on open water at nighttime.

• Multi-Color

Application

• Flexible Tubes
• Rigid Tubes

Control Type

• Wireless Remote

Million Color LED Marine Boat Lighting Kit

• Your Boat Will Be the Talk of the Marina with Stylish Multi-Color LED Lighting
• Choose from 15 Solid Colors + 6 Lighting Effects
• Flexible Light Tubes with Watertight Screw Cap Connectors
• Waterproof Control Box
• Offered in 6pc-20pc Kits

Blue LED Marine Boat Lighting Kit

• Add Ultra-Bright Blue LED Accent Lighting to Your Boat
• Solid Color Illumination
• Light Tubes with Watertight Screw Cap Connectors
• Offered in 2pc-8pc Kits

Red LED Marine Boat Lighting Kit

• Add Ultra-Bright Red LED Accent Lighting to Your Boat

Green LED Marine Boat Lighting Kit

• Add Ultra-Bright Green LED Accent Lighting to Your Boat

White LED Marine Boat Lighting Kit

• Add Ultra-Bright White LED Accent Lighting to Your Boat

WHERE TO INSTALL YOUR LIGHT KIT

You have many options when it comes to choosing a location or locations on your boat for installing an LEDGlow Marine Light Kit. You can add incredible lighting effects in your deck, crow’s nest, cockpit, cabin, gunwales, under consoles, or behind panels, as well as numerous other areas. These flexible LED accent lights are not only fun and look great, but they have the added benefit of increased lighting which translates to increased visibility and safety while on your boat during evening hours!

MANY INCREDIBLE KITS TO CHOOSE FROM

The Million Color Marine Boat Lighting Kit features 20” flexible tubes in 6, 8, 10, or 12 piece kit sizes. The Million Color Marine Kit features 15 solid colors, 2 million color cycle modes, 3 flashing modes, and 1 fading mode that can be selected using the included wireless remotes. The Single Color Marine Boat Lighting Kits are available in blue, green, red, or white and offered in 2, 4, 6, or 8 piece kit sizes. Single Color Marine Kits utilize 24” flexible waterproof tubes. Each Marine Lighting Kit can be powered using any 12 volt power source and draws extremely low amperage.

WHY CHOOSE LED BOAT LIGHTS FROM LEDGLOW?

LED Boat Lights from LEDGlow are among many of the finest and most unique aftermarket boat light kits available in the industry today. When you purchase one of our products, you’ll experience the quality and innovation that go hand-in-hand with these boat LED strip lights. Choose from the finest set of LED boat lights interior accent kits and get started today! And when you’re searching for the best LED boat light kits, look no further than LEDGlow.

SINGLE COLOR VERSUS MILLION COLOR KITS

Choosing whether to go with one of LEDGlow’s single color kits or million color LED boat lights kits is a simple matter of preference. Both LED accent strip light kits will bring a completely new element of sleek style and sophistication to your maritime vessel. Single color LED lights are ideal when you have a select color of choice, such as an LEDGlow red, blue, white, or green LED lighting kit. This one fixed color will radiate brilliantly through your entire kit. However, for someone who can’t quite decide on a single color and are looking for variety in their LED strips, the Million Color Kit is the way to go. These LED glow strips provide you with a nearly unlimited set of color combinations so that you can routinely adjust the look and feel of your boat’s lighting patterns whenever you choose. So when you’re looking for the best LED Marine Light Kit, you can’t go wrong with either of LEDGlow’s slimline, cutting-edge neon glow lighting systems. Both will enhance your maritime travels in their own unique way.

THE BENEFITS OF LED BOAT LIGHTS

Not long ago, many people did not see LED lighting and technology as something that was worth making an investment in. Today, the benefits of LED lighting for boats are better recognized and boat enthusiasts see LED accent lighting fixtures as an integral piece of a boat’s layout. Along with looking great, the benefits of LED technology include significantly lowering heat output and power draw. In addition to deck lights, boat cabin lights, navigation lighting, LED courtesy lights and marine lighting in general, it is becoming increasingly common that boat builders include marine LED light strips as a standard part of their equipment.

Please verify you are a human

Access to this page has been denied because we believe you are using automation tools to browse the website.

This may happen as a result of the following:

• Javascript is disabled or blocked by an extension (ad blockers for example)
• Your browser does not support cookies

Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.

Reference ID: 554e1e2e-e631-11ee-a17d-efff49df6c44

Powered by PerimeterX , Inc.

• Jack Plates & Trim Units
• Trolling Motor Accessories
• Plumbing & Drains
• LED Lighting
• Boating Accessories
• Hatches, Plates & Lids
• Organization
• Boating Essentials™
• Fishing Essentials™
• Kayak Essentials™
• Trailer Essentials™
• RV Essentials™
• New Arrivals

• Shop Brands
• Boat Builders
• Dealers & Distributors

LED Navigation Lights

Let's Connect

Have an issue.

Contact our Support team for more assistance.

Stay In The Know

Sign up to join our mailing list.

• ATLAS Awards
• Shipping Info
• Returns and Exchanges
• Dealer Locator Sign-Up
• Pro Staff & Guides
• Military Discount
• Affiliate Applications
• Site Privacy Policy
• Copyright and Trademarks
• Terms and Conditions
• Supplier Legal Policies
• Do not sell or share my personal information

This website uses cookies to ensure you get the best experience on our website.

Deluxe Boat Light Kit

The Deluxe Boat Light Kit is a Premium Scale RC Light Kit for your RC Power or Sail Boat.  Impress your friends with the incredible Scale Appearance and Brightness of these lights.

This 100%  Waterproof Light Kit includes Super Bright LEDs and MyTrickRC's SQ-1 Lighting Controller which is nice and compact so it's easier to install, and adds Minimum Weight to your Boat.  The 3D Printed Navigation Light Housing and Stern Light Pole have a great Realistic Appearance, and are extremely Visible at Night.  They are made from Rugged Nylon plastic, and designed to be Plug and Play.  The Deluxe Boat Light Kit also has Remote On/Off Controlled on a 3rd Channel, so it's possible to switch your lights On and Off from your Transmitter.  All required Mounting Hardware and instructions come included.

Deluxe Boat Light Kit Includes:

• 1pc SQ-1 Controller (powers from your boat's receiver, or optional 9V battery*)
• 1pc 3mm Super Bright WHITE Stern LED
• 1pc 3mm Super Bright RED Nav LED 
• 1pc 3mm Super Bright GREEN Nav LED
• 1set 3D Printed Nav Light and Stern Pole
• Mounting Hardware

*9V Battery Adapter Cable Sold Separately

• SQ-1 Controller
• Deluxe Boat Kit
• Scale Nav Lights
• Remote On/Off
• choosing a selection results in a full page refresh

THE 10 BEST Moscow Boat Rides & Cruises

Boat rides & cruises in moscow.

• Boat Rentals
• Scuba & Snorkeling
• Fishing Charters & Tours
• Water Sports
• Stand-Up Paddleboarding
• Surfing, Windsurfing & Kitesurfing
• Kayaking & Canoeing
• Waterskiing & Jetskiing
• Parasailing & Paragliding
• River Rafting & Tubing
• Dolphin & Whale Watching
• Speed Boats Tours
• Submarine Tours
• 5.0 of 5 bubbles
• 4.0 of 5 bubbles & up
• 3.0 of 5 bubbles & up
• 2.0 of 5 bubbles & up
• 3rd Transport Ring (TTK)
• District Central (TsAO)
• Garden Ring
• District Northern (SAO)
• Good for Big Groups
• Good for Couples
• Good for a Rainy Day
• Budget-friendly
• Good for Kids
• Hidden Gems
• Honeymoon spot
• Good for Adrenaline Seekers
• Adventurous
• Things to do ranked using Tripadvisor data including reviews, ratings, photos, and popularity.

1. Flotilla Radisson Royal

2. Moscow River Boat Tours

3. Sup-Club

4. Akvanavt Diving Centre

5. Diving Center Crocus City Oceanarium

6. CheapRussia Tours

7. Kite School Kiteclass

8. SUP Center

9. Erwin. Reka

11. Easy Russia Tour Guide

12. Lovely Russia Tours

13. Capital River Boat Tours - Moscow Centre

14. Alfa Centr

15. Diving Club Divers

16. Sup Outdoor

17. MORE MOSCOW

19. Soho Sailing Style

20. Diving Center Crocodile

21. Dive-Project

22. Mosparokhodstvo

24. Kosinskiy Children Marine Club

25. Kayak Moscow

26. DIVECLUB CHE

27. FLOW Moscow

28. Moswake

29. Morskiye Volki

30. S-cruises

What travelers are saying

• CheapRussia Tours
• Easy Russia Tour Guide
• Lovely Russia Tours
• MORE MOSCOW
• Insider Moscow Tours
• Flotilla Radisson Royal
• Moscow River Boat Tours
• Capital River Boat Tours - Moscow Centre
• Diving Center Crocus City Oceanarium

• Bahasa Indonesia
• Slovenščina
• Science & Tech
• Russian Kitchen

Check out Moscow’s NEW electric river trams (PHOTOS)

Water transportation has become another sector for the eco-friendly improvements the Moscow government is implementing. And it means business. On July 15, 2021, on the dock of Moscow’s ‘Zaryadye’ park, mayor Sergey Sobyanin was shown the first model of the upcoming river cruise boat.

The model of the electrical boat with panoramic windows measures 22 meters in length. The river tram - as Muscovites call them - has a passenger capacity of 42, including two disabled seats. The trams will also get cutting edge info panels, USB docking stations, Wi-Fi, spaces for scooters and bicycles, as well as chairs and desks for working on the go. The boats will be available all year round, according to ‘Mosgortrans’, the regional transport agency. 

Passengers will be able to pay with their ‘Troika’ public transport card, credit cards or bank cards. 

The main clientele targeted are people living in Moscow’s river districts - the upcoming trams will shorten their travel time in comparison to buses and other transportation by five times, Mosgortrans stated. 

As the river trams are being rolled out, Moscow docks will also see mini-stations, some of which will also be outfitted with charging docks for speed-charging the boats.  

Moscow is set to announce the start of the tender for construction and supply in September 2021. The first trams are scheduled to launch in June 2022 on two routes - from Kievskaya Station, through Moscow City, into Fili; and from ZIL to Pechatniki. 

“Two full-scale routes will be created in 2022-2023, serviced by 20 river trams and a number of river stations. We’ll continue to develop them further if they prove to be popular with the citizens,” the Moscow mayor said .

If using any of Russia Beyond's content, partly or in full, always provide an active hyperlink to the original material.

to our newsletter!

Get the week's best stories straight to your inbox

• Face it: Moscow Metro to introduce FACIAL payment technology
• What does Moscow smell like?
• Riding Moscow’s train of tomorrow (PHOTOS)

This website uses cookies. Click here to find out more.

• Lights & Lighting Accessories
• Accent & Off Road Lighting

Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime Try Prime and start saving today with fast, free delivery

Amazon Prime includes:

Fast, FREE Delivery is available to Prime members. To join, select "Try Amazon Prime and start saving today with Fast, FREE Delivery" below the Add to Cart button.

• Cardmembers earn 5% Back at Amazon.com with a Prime Credit Card.
• Unlimited Free Two-Day Delivery
• Streaming of thousands of movies and TV shows with limited ads on Prime Video.
• A Kindle book to borrow for free each month - with no due dates
• Listen to over 2 million songs and hundreds of playlists
• Unlimited photo storage with anywhere access

Important:  Your credit card will NOT be charged when you start your free trial or if you cancel during the trial period. If you're happy with Amazon Prime, do nothing. At the end of the free trial, your membership will automatically upgrade to a monthly membership.

Return this item for free

Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges

• Go to your orders and start the return
• Select the return method

This item has been tested to certify it can ship safely in its original box or bag to avoid unnecessary packaging. Since 2015, we have reduced the weight of outbound packaging per shipment by 41% on average, that’s over 2 million tons of packaging material.

Image Unavailable

• To view this video download Flash Player

NAOEVO 12Inch LED Light Bar and 2PCS 4Inch LED Pod Lights, 420W 42000LM LED Fog/Driving/Off Road Lights Bar, Spot Flood Combo LED Light Bar with Wiring Harness Kit-3 Lead for Truck ATV Jeep Boat

Purchase options and add-ons, about this item.

• 🚗【Ultra Bright LED Lights For Car】12Inch LED bar light and 2PCS 4Inch LED pod lights have a total of 140pcs high quality SMD3030 led chips inside, achieving lighting effects of 420W/42000LM. Its bright and powerful 6500K white light easily defeats the darkness in front of you, helping you drive safely and efficiently!
• 🚗【Spot & Flood Combo Automotive Light Bars】The LED work light features a triple row and nest reflector cup design, with a 15° spotlight reflector that provides high-focus, long-distance lighting, and a 120° flood beam that provides more Wide exposure area. Additionally, a 45° adjustable stand is included for easy and flexible repositioning to change beam direction.
• 🚗【Excellent Performance】NAOEVO LED light adopts die-cast aluminum housing and advanced sealing technology, waterproof level reaches IP68, and with a sturdy PC lens, which effectively resist rain, snow, sandstorms and other harsh conditions. Moreover, the back of each light is designed with 10 cooling fans to efficiently dissipate heat. The combination of these superior functions results in light lifespan of up to 50000 hrs, ensuring reliable driving in demanding environments.
• 🚗【Superior Wiring Harness】LED fog lights are very easy to install and connect, please check our pictures for specific installation and connection steps. In addition, we offer a 12ft 3 leads wiring harness which comes with 40A power relay and inline blade fuses. Good electrical conductivity, high-temperature resistance, and melt resistance, provide you with multiple protections.
• 🚗【Wide Application】The off road LED lights fits an array of vehicles and can be utilized for various purposes such as off road lights, tractor lights, fog lights, truck lights, etc. Also ideal for travel, long-distance transportation, and courtyard light, our LED work lights are the perfect addition to enhance your outdoor adventures.
• 🚗【NAOEVO Support】Our LED light bar kit provide 1-year warranty. If you have any questions when using our light bar, please contact us and we will solve that for you!

Frequently bought together

Similar items that may deliver to you quickly

Product Description

POWERFUL & BRIGHT WHITE LIGHT

Clearer Driving Visibility

No Dark Spots or Shadow Areas

Long-distance Driving Vision

No Afraid of Frequent Replacements

PRODUCT SPECIFICATION

Suitable for 99% of vehicles in various weather.

Product information

Technical details, additional information, warranty & support, what's in the box.

• Light kit inlcuded

Compare with similar items

Looking for specific info, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Start Selling with Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Host an Amazon Hub
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Your Ads Privacy Choices

• Vessel Reviews
• Passenger Vessel World
• Offshore World
• Tug and Salvage World
• Maritime Security World
• Specialised Fields
• Marine Projects World
• Small Craft World
• Tanker World
• Dry Cargo World
• Boxship World
• Aquaculture World
• Trawling World
• Longlining World
• Seining World
• Potting World
• Other Fishing Methods
• Regulation & Enforcement
• Feature Weeks
• Classifieds
• Book Reviews

VESSEL REVIEW | Sinichka – Electric commuter boats designed for Russia’s Moskva River

A series of three new electric monohull commuter ferries have already begun operational sailings on the Moskva River in the Russian capital Moscow.

Built by Russian shipyard Emperium, sister vessels Sinichka , Filka , and Presnya – all named after rivers in Moscow – are being operated by the Moscow Department of Transport and Road Infrastructure Development (Moscow Deptrans). They are the first units of a planned fleet of 20 vessels that will serve the capital city and other nearby communities. The new ferry system will be the water transport system to be operated on the Moskva River in 16 years.

Each vessel has a welded aluminium hull, an LOA of 21 metres, a beam of 6.2 metres, a draught of only 1.4 metres, a displacement of 40 tonnes, and capacity for 80 passengers plus two crewmembers. Seating is available for 42 passengers on each ferry, and the main cabins are also fitted with USB charging ports, wifi connectivity, tables, toilets, and space for bicycles and scooters. The cabin layout can be rearranged to allow the operator to adjust the distances between the seats and to install armrests of varying widths.

An open upper deck is also accessible to passengers and is the only area on each ferry where smoking is allowed.

The ferries are all of modular construction with each ferry’s wheelhouse, main cabin, and other structural elements being built as complete, separate components. This enables the ferries to be easily dismantled for transport to anywhere in Russia by rail and then quickly re-assembled within seven days.

The ferries are also ice-capable. Recently completed operational trials on the Moskva showed that the vessels can also easily navigate under mild winter conditions with broken surface ice, though year-round operations are planned for the entire fleet.

The ferries are each fitted with 500kWh lithium iron phosphate battery packs that supply power to two 134kW motors. This configuration can deliver a maximum speed of 11.8 knots, a cruising speed of just under 10 knots, and a range of 150 kilometres.

Emperium said the transfer of rotation of electric motors to the propeller is carried out by direct drive. As a propulsion installation, a pulling rotary propeller-steering column with double screws is used. The installation of double pulling screws, with similar power, allows an operator to increase the efficiency of the propulsion system to deliver a slightly higher speed or to reduce energy consumption. This arrangement also provides the ferries with enhanced manoeuvrability necessary for navigating in close quarters.

The batteries themselves have projected service lives of 10 to 12 years and are fitted with safety features such as built-in fire extinguishers and gas vents. Quick-disconnect features allow the batteries to be easily removed for replacement or maintenance.

Some of our readers have expressed disquiet at our publication of reviews and articles describing new vessels from Russia. We at Baird Maritime can understand and sympathise with those views. However, despite the behaviour of the country’s leaders, we believe that the maritime world needs to learn of the latest developments in vessel design and construction there.

Click here to read other news stories, features, opinion articles, and vessel reviews as part of this month’s Passenger Vessel Week.

Related Posts

Baird Maritime

Tags: Emperium Filka Moscow Moscow Department of Transport and Road Infrastructure Development Moskva River Presnya Russia Sinichka WBW newbuild

• Previous VESSEL REVIEW | Ferry Rokko – Second 194m Ro-Pax for Miyazaki Car Ferry
• Next Brighton man to be charged for illegal abalone haul

Baird Maritime , launched in 1978, is one of the world's premier maritime publishing houses.

The company produces the leading maritime new portal BairdMaritime.com , home of the world famous Work Boat World, Fishing Boat World, Ship World, Ausmarine, and Commercial Mariner sub-sites, and the industry-leading ship brokerage platforms WorkBoatWorld.com and ShipWorld.com .

Contact us: [email protected]

© Copyright - Baird Maritime

• Terms & Conditions
• Advertise with Baird Maritime
• Submit News/Leads