sailboatdata jouet 950

• Fiche technique

Fiche technique du Jou�t 950

Voir la fiche technique

38 mod�les de bateaux

Yachting-France

7 membres � 2 ports

9 membres � 3 ports

Bateaux de l'architecte Yves Mareschal

Dupuy Chautard

2 membres � 1 port

Review of Jouët 950

Basic specs..

The boat is typically equipped with an inboard diesel engine at 18.0 hp (13 kW).

The transmission is a shaft drive. A shaft drive will in the long run require less maintenence than other types of drive e.g. a sail drive.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Capsize Screening Formula (CSF)?

The capsize screening value for Jouët 950 is 2.20, indicating that this boat would not be accepted to participate in ocean races.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Jouët 950 is about 212 kg/cm, alternatively 1190 lbs/inch. Meaning: if you load 212 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1190 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is L/B (Length Beam Ratio)?

What is SA/D (Sail Area Displacement ratio)?

Maintenance

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

We are always looking for new photos. If you can contribute with photos for Jouët 950 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

• Choose the kind of boat Big boats Motor boats Rubber boats Sailing boats Sailing multihull boats

Jouet Jouët 950

General Data

Shipbuilder:, see also: boats for sale.

• hunter marine 27

Overall length:

Maximum beam:, displacement:, straightening:, sail details mq, transmission:.

Home > Find Your Sail > Search by Make and Model > Jouet > Jouet 950

" * " indicates required fields

Step 1 of 3

Let's Get to Know Each Other

Let's connect, why it's important to partner with a designer on your jouet 950 sail.

The design is the most critical part of your new sail. Ensuring the sail fits and performs its best is a must for our crew. The Precision Sails Design team are experts at their craft. Unlike other sail lofts all of our sailors work one-on-one with a designer to perfect their Jouet 950 sail.

No Two Jouet 950 Sails Are Alike

There are many factors that affect the performance and design of your sails. Location, sailing experience, and weather conditions all come into play when picking the perfect sail. Two mainsails made for two Jouet 950’s in California and Florida will have different designs, sailcloth, and options based on what is best for the sailor.

Taking measurements is easy. All sailors work alongside our measurement team to measure and confirm their rig specs. This helps ensure your design is flawless and allows us to extend our Perfect Fit Guarantee to all of our sailors.

Discover the best cloth for your sailing needs, our sail details, or more about how Precision Sails is leading the sail-making industry with innovative new practices.

Proudly offering the largest selection of sailcloth in the industry, our team is always available to help you find your perfect sail. Whether you're a weekend sailor, coastal cruiser, or club racer our team is ready to walk you through the process.

Types of Sails

Precision Sail Loft specializes in producing headsails, mainsails, spinnakers, gennakers, and code zeros. So no matter the type of sail you’re looking for, we can help. Our sails are trusted by cruisers and racers alike from around the globe. Review the sail options and craftsmanship available to customize your dream sail.

Build & Process

Every sail we craft is produced to the highest standards with the best hardware, craftsmanship, and skill-set in the industry. Pair that with Precision Sails' approach to communication and your sailboat will be ready to set sail before you know it.

Unparalleled Commitment To Helping Sailors

As experts in design, communication, and production our team is ready to take on the task of making sails for your boat. Give us a call to get started.

“ I just received my asymmetrical spinnaker, with sock and turtle bag, along with a new 135 Genoa. The entire process was simple and both sales and the design team were in regular contact if there were any questions. The customer portal was easy to use and lets you keep track of where in the process your sails are. Great sails, great service -Graham Edwards (Facebook)

“ The whole team at Precision Sails was fantastic from start to finish. We’ve had a laminate main and genoa made so far and have a spinnaker on the way. They listened carefully to our needs and recommended a great sail cloth. We couldn’t have gotten more bang for our buck! -Noah Regelous (Google)

“ We received our spinnaker and launched it yesterday and I just wanted to let you know how pleased we are with it. The service we received from your company was exceptional and the quality of your product is second to none. We will certainly be return customers in the next few months to replace our main and jib sails and will recommend your company to all our sailing buddies. Once again-thank you.” -Daniel Jackson (Google)

“ we had good communication during the planning stages and the knowledgeable people at precision sails really got me fixed up good! The sails look and work fabulous! my boat sails better than it ever had! couldn’t be more pleased with the product AND the service!” -Fred Jelich (Facebook)

“ Our new furling jib for a Corsair 27 Had to be specially designed due to the height of the furler, but this was accomplished quickly and in short order we had our sail which fits beautifully and has a great shape. It’s everything we could have wanted, high tech design, thoughtfully executed and affordable.” -Nancy Y. (Yelp)

Request a Jouet 950 Quote

Looking to buy a new headsail or mainsail for your Jouet 950? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.

Last updated sailboats

builder name

Rax Cantieri

Revedin & Sperduti

Sun Odyssey 49

Philippe Briand

Sun Odyssey 42i

Marc Lombard

Bavaria 50 Vision

Bavaria Yachts

Bavaria 40 Vision

Yachting France

Daniel Tortarolo

Sergio Abrami

Gib Sea 126 Master

Gibert Marine (Gib Sea)

Joubert-Nivelt

Fjord 28 Cs

Fjord Plast

Eivind Amble, Geir grung

Gib Sea 312 Plus

Rob Humphreys

Vagabond 33

Micro Challenger 5.50

Jacques Gaubert

Danilo Cattadori

Hunter 35.5

Hunter Marine

Van Peteghem Lauriot Prévost Yacht Design

Sciacchetrà

Philippe Harlè

Rondo Mt 12

Biasi Costruzioni Nautiche

Jacques Fauroux

Hallberg Rassy 42 (E)

Hallberg Rassy

Olle Enderlein

Fountaine Pajot

Can't find the sailboat that you are looking for? Insert it yourself in our database: >> immediately earn a 10 € discount coupon on your first order in the HiNelson.com online shop!

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

JouËT Regent

JouËT Regent is a 27 ′ 5 ″ / 8.4 m monohull sailboat designed by P. Jouët & Cie and built by Yachting France and Jouët starting in 1966.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Today's news
• Reviews and deals
• Climate change
• 2024 election
• Fall allergies
• Health news
• Mental health
• Sexual health
• Family health
• So mini ways
• Unapologetically
• Buying guides

Entertainment

• How to Watch
• My watchlist
• Stock market
• Biden economy
• Personal finance
• Stocks: most active
• Stocks: gainers
• Stocks: losers
• Trending tickers
• World indices
• US Treasury bonds
• Top mutual funds
• Highest open interest
• Highest implied volatility
• Currency converter
• Basic materials
• Communication services
• Consumer cyclical
• Consumer defensive
• Financial services
• Industrials
• Real estate
• Mutual funds
• Credit cards
• Credit card rates
• Balance transfer credit cards
• Business credit cards
• Cash back credit cards
• Rewards credit cards
• Travel credit cards
• Checking accounts
• Online checking accounts
• High-yield savings accounts
• Money market accounts
• Personal loans
• Student loans
• Car insurance
• Home buying
• Options pit
• Investment ideas
• Research reports
• Fantasy football
• Pro Pick 'Em
• College Pick 'Em
• Fantasy baseball
• Fantasy hockey
• Fantasy basketball
• Download the app
• Daily fantasy
• Scores and schedules
• GameChannel
• World Baseball Classic
• Premier League
• CONCACAF League
• Champions League
• Motorsports
• Horse racing
• Newsletters

New on Yahoo

• Privacy Dashboard

15 men brought to military enlistment office after mass brawl in Moscow Oblast

Local security forces brought 15 men to a military enlistment office after a mass brawl at a warehouse of the Russian Wildberries company in Elektrostal, Moscow Oblast on Feb. 8, Russian Telegram channel Shot reported .

29 people were also taken to police stations. Among the arrested were citizens of Kyrgyzstan.

A mass brawl involving over 100 employees and security personnel broke out at the Wildberries warehouse in Elektrostal on Dec. 8.

Read also: Moscow recruits ‘construction brigades’ from Russian students, Ukraine says

We’re bringing the voice of Ukraine to the world. Support us with a one-time donation, or become a Patron !

Read the original article on The New Voice of Ukraine

Recommended Stories

Jon rahm reveals his menu for the 2024 masters champions dinner.

Rahm won the 2023 Masters by four strokes over Brooks Koepka and Phil Mickelson.

NFL free agency good, bad and ugly: How has your favorite team done so far?

Which teams should be most excited after a week of NFL free agency?

Pass or Fail: Houston Texans show off new road uniforms after Reddit leak

Texans CEO and Chairman Cal McNair took to Reddit to show off one of the team's new uniform combinations in response to a leak.

March Madness: Ranking the NCAA men's tournament teams from 1 to 68

UConn is the favorite, but there are at least eight others who are legit contenders to cut down the nets in April.

The CEO of Warren Buffett's favorite oil company thinks its stock is 'very undervalued'

Occidental Petroleum's CEO said the company will focus on paying off debt for the next couple of years as it puts a pause on aggressive share buybacks.

Timberwolves star Anthony Edwards throws down ridiculous dunk of the year over John Collins in win vs. Jazz

John Collins got put on a wild poster on Monday night, and had to leave the game due to a head injury.

Baker Mayfield gets called 'a 10 on the pr--- scale' by Bucs GM, then thanks him: 'I'll take that'

Baker took it as a compliment, even though it didn't really sound like one.

Has Caitlin Clark locked up Naismith Player of the Year? Here are 5 contenders for the nation's top award

Clark's record-breaking season has transcended college basketball, but there are several deserving candidates this season.

The best soundbars for 2024: My 7 top picks for theater-quality audio at home

A soundbar is one of the best TV upgrades you can buy. Here are the best models for every type of viewer.

Dodgers vs. Padres: How to watch the 2024 MLB Seoul Series

Dodgers fans, Padres fans, are you ready for the 2024 MLB Seoul Series? Let's play ball!

2024 Fantasy Baseball: Andy Behrens' potential 'league-winners' from recent Tout Wars draft

Fantasy baseball analyst Andy Behrens reveals his favorite picks from his recent Tout Wars draft while exposing the truth about league winners.

2024 Fantasy Baseball: Jackson Holliday leads 5 key draft sleepers from the infield

Dalton Del Don examines potential draft values with the upside to make a difference in fantasy baseball leagues.

Nearing a loaded 2024 NFL Draft, Justin Fields and the 2021 QB class remind us the position is a crapshoot

Why Fields wasn’t scooped by other teams largely centers on his one year of rookie contract control, which features a fifth-year option that will be set at $25.6 million.

MLB 26-and-under power rankings, Nos. 15-11: Minnesota's Royce Lewis, Boston's Triston Casas lead young cores on the rise

The Twins, Red Sox, Cardinals, Yankees and Cubs make up the next tier on this year's list.

NL East season preview: What's in store for the Braves, Phillies, Mets, Marlins and Nationals in 2024?

The Braves are aiming for a seventh straight division title. The Phillies have other ideas.

Aaron Rodgers says 'Sandy Hook was an absolute tragedy' in wake of report he believed in conspiracy theory

Rodgers' statement comes a day after a CNN story detailing comments Rodgers made about the shooting in 2013.

Russell Wilson's hurried deal with Steelers may say a lot about his intentions, and Pittsburgh's

Wilson's announced deal with Pittsburgh went down before free agency even began. Why were both sides so quick to link up?

NFL free agency: Moves that caught our attention so far, from the Patriots (good) to some running backs (odd)

Yahoo Sports' Nate Tice breaks down the moves that stuck out to him now that the initial dust has settled on Tamperpalooza.

NFL Draft 2024: Top 50 big board is heavy on offense, starting with Drake Maye and Caleb Williams at the top

Yahoo Sports NFL Draft expert Nate Tice delivers his first top 50 of this draft cycle, with breakdowns of each prospect's strengths, weaknesses, projections and more.

Netflix's 'Receiver' series to follow 5 NFL players, including George Kittle, Justin Jefferson, Deebo Samuel

The eight-episode Netflix series follow last year's "Quarterback," which documented the 2022 seasons of Kirk Cousins, Patrick Mahomes and Marcus Mariota.

Strange Glow Over Moscow Skies Triggers Panic as Explosions Reported

B right flashes lit up the night sky in southern Moscow in the early hours of Thursday morning, new footage appears to show, following reports of an explosion at an electrical substation on the outskirts of the city.

Video snippets circulating on Russian-language Telegram channels show a series of flashes on the horizon of a cloudy night sky, momentarily turning the sky a number of different colors. In a clip shared by Russian outlet MSK1.ru, smoke can be seen rising from a building during the flashes lighting up the scene.

Newsweek was unable to independently verify the details of the video clips, including when and where it was filmed. The Russian Ministry of Emergency situations has been contacted via email.

Several Russian Telegram accounts said early on Thursday that residents of southern Moscow reported an explosion and a fire breaking out at an electrical substation in the Leninsky district, southeast of central Moscow.

Local authorities in the Leninsky district told Russian outlet RBC that the explosion had happened in the village of Molokovo. "All vital facilities are operating as normal," Leninsky district officials told the outlet.

The incident at the substation in Molokovo took place just before 2 a.m. local time, MSK1.ru reported.

Messages published by the ASTRA Telegram account, run by independent Russian journalists, appear to show residents close to the substation panicking as they question the bright flashes in the sky. One local resident describes seeing the bright light before losing access to electricity, with another calling the incident a "nightmare."

More than 10 villages and towns in the southeast of Moscow lost access to electricity, the ASTRA Telegram account also reported. The town of Lytkarino to the southeast of Moscow, lost electricity, wrote the eastern European-based independent outlet, Meduza.

Outages were reported in the southern Domodedovo area of the city, according to another Russian outlet, as well as power failures in western Moscow. Electricity was then restored to the areas, the Strana.ua outlet reported.

The cause of the reported explosion is not known. A Telegram account aggregating news for the Lytkarino area described the incident as "an ordinary accident at a substation."

The MSK1.ru outlet quoted a local resident who speculated that a drone may have been responsible for the explosion, but no other Russian source reported this as a possible cause.

Ukraine has repeatedly targeted Moscow with long-range aerial drones in recent months, including a dramatic wave of strikes in late May.

On Sunday, Moscow Mayor Sergei Sobyanin said the region's air defense systems had intercepted an aerial drone over the city of Elektrostal, to the east of Moscow. No damage or casualties were reported, he said.

The previous day, Russian air defenses detected and shot down another drone flying over the Bogorodsky district, northeast of central Moscow, Sobyanin said.

There is currently no evidence that an aerial drone was responsible for the reported overnight explosion at the electrical substation in southern Moscow.

Related Articles

• Russian Soldier Bashes Drone With Shovel After Detonation Failure: Video
• Russia Headed for Disappointment in Battles Along Dnieper River: UK
• Ukraine's Military Receives Good News From Multiple NATO Allies

Start your unlimited Newsweek trial

Moscow Muled

How to clean and care for copper mugs: the definitive guide.

Oct 15, 2019

In this post, we reveal the complete guide to cleaning and caring for your copper mugs. From how to maximize the lifespan of your mugs to how to ensure that they maintain that brilliant copper shine, we have you covered. Let's get started!

Introduction

Since the creation of the Moscow Mule in the 1940's, copper mugs have never been more popular than they are today. This refreshing cocktail made of lime juice, vodka, and ginger beer is traditionally served over ice in an iconic copper mule mug. No matter what beverage you choose to serve in it, the appeal of the copper mug is hard to deny. As bars, restaurants and at-home use of copper mugs continues to grow in popularity, it is important to know how to properly care for and clean copper. This article will tell you everything you need to know, including:

Why is Cleaning Copper Mugs Important?

Why does copper tarnish.

• How Do you Clean Copper Mugs?
• 5 Easy & Natural Ways to Remove Copper Tarnish
• Is it Safe to Drink from Copper Mugs?

Are Copper Mugs Dishwasher Safe?

• Lined Versus Unlined Copper Mugs
• The Benefits of Using Copper Mugs
• Essential Tips to Care for your Copper Mugs

Like any drinking vessel, copper cups, mugs, water bottles and tumblers need to be washed after every use. Copper does require specific care and maintenance, however it's quite simple and easy to learn and do.

First and foremost, copper mugs should be cleaned properly for health and safety reasons. Whether at a restaurant or at home, you don't want anyone getting sick from drinking from an unwashed cup.

There is something compelling about the warm glow of polished copper. A huge part of the appeal and popularity of cocktails like the Moscow Mule is the unique aesthetic of the copper mug. This metal will tarnish naturally with time and use, so cleaning it properly can be essential to keeping it shiny, and fully experiencing the many benefits of drinking from a copper mug.

Like iron developing rust, copper will naturally tarnish  over time with exposure to humidity and other elements found in the air. Copper's blue-green tarnish, known as patina, can be either useful or annoying, depending on its intended use.

The patina actually serves as a protective layer for the copper beneath, and can be useful in outdoor applications such as roofing or pipes.  However, when it comes to mugs or cups, we want the copper to shine as warmly as possible, so it is essential to know about preventative care and maintenance.

Don't worry, it's super easy to do, and incredibly satisfying to restore and polish your tarnished copper mugs.

How Do You Clean Copper Mugs?

Cleaning copper mugs is like cleaning most anything, except that it MUST be washed by hand. In other words, never put them in the dishwasher, ever. Take 30 seconds to gently wash them by hand with a soft sponge, soap and warm water.

For most people at home, this shouldn't be a problem. But some high-volume bars or restaurants might not be able to dedicate the time needed for proper care. This is one reason a business may prefer a tin-lined  or lacquered copper cup that may need less polishing, although they too should still be washed by hand.

The most important part of cleaning your copper mug is drying it!

Residual water in the slightest amount can lead to tarnishing, so experts highly recommend you dry your copper mug twice, with two different soft towels or cloths until all moisture is removed.  This extra step only takes a few moments, and will go a long way towards the durability and cleanliness of your copper mule mugs.

If you want your copper mug to look nice, dry it twice!

5 Easy and Natural Ways to Remove Copper Tarnish

Owning a copper mug comes with the added responsibility of some occasional, simple maintenance. When your favorite mug starts to turn green, here are some easy solutions to restore its natural shine!

Lemon or Limes and Salt

This simple method is quick and easy, and ideal for bars or restaurants that may have an abundance of lemons on hand. Simply pour some table or sea salt onto a dish, and cut a fresh lemon or lime into 1/4th slices. Dip the fruit slice into the salt, and scrub the copper mug with slow, methodical circles inside and out. The change should be almost instantaneous, and when the tarnish has been removed, wash under warm or cool water, and dry thoroughly.

Vinegar and Salt

Mix one cup of vinegar, one tablespoon of salt, and five cups of water. Pour the solution into a saucepan, place your mug into the saucepan, and bring it to a boil. After a few minutes, the tarnish will have disappeared, and you can remove the mug with tongs, rinse it in cold water, and dry thoroughly with two soft dish towels.

Vinegar and Baking Soda

Create a paste with three parts baking soda, and one part vinegar. Use a sponge to apply it to the mug with small circular motions and let it sit for about 10 minutes in order for the magic to happen. After that, simply rinse and dry until all moisture has been removed.

Harness the power of tomatoes to clean your tarnished copper mug! Apply the ketchup using a soft sponge or toothbrush, always rubbing in small circles. Then let it stand for 30 minutes. Remove the ketchup in the same way you applied it (a specially designated tarnish-toothbrush can be a highly effective tool for getting into those hard to reach places). Finally, rinse with water, and dry thoroughly with two soft towels.

Tamarind Paste

Tamarind is a tropical fruit, popular in Caribbean, African and Indian cuisine. It contains tartaric acid, which helps remove tarnish from brass and copper. If this is something you have access to, simply add water to create a paste, and rub it onto the copper with a soft sponge or cloth.  After a few minutes, rinse off the paste, and dry completely.

Metal Polish

Although the natural methods listed above are all equally effective, inexpensive and safe, another option is to use a tarnish remover or metal polish. Popular brands like Brasso are great for polishing many different kinds of metals, but the main ingredients may be less than desirable (rubbing alcohol, ammonia, mineral spirits and silica powder). Chances are you can easily find most of the ingredients for cleaning copper mugs in your pantry, and can avoid buying a product full of harsh chemicals.

Is It Safe To Drink From Copper Mugs?

Yes, it is safe to drink from copper mugs , despite click-bait headlines, myths and legislation that may suggest otherwise. True, when using 100% pure copper mugs it is possible that trace amounts of copper could be ingested. However, this can be mitigated by using stainless-steel plated copper mugs.

Copper is an essential part of human biology, and is necessary for regulating metabolic systems and vital organs. Copper deficiency can lead to arthritis, osteoporosis, cardiovascular diseases and colon cancer.

Not only do our bodies need copper, we also have systems in place to naturally deal with any excess copper. Verified scientific studies have shown copper can do impressive things.

• Copper and Iron work together to form red blood cells.
• Copper helps maintain collagen, and along with other antioxidants, can reduce signs of aging.
• Copper helps absorb excess iron in the liver.
• Copper improves brain and nerve cell synaptic responses.
• Copper aids in digestion and helps with ulcers and inflammation.

Copper toxicity is quite rare and, according to the World Health Organization , "There is a greater risk of health effects from a deficiency of copper intake than excessive copper intake."

The FDA guidelines do not recommend using copper for any food or beverage purposes, solely because of the extra care needed to maintain it, and applies exclusively to commercial operations, with varying local and state regulations.

This is meant to protect consumers from improperly cleaned or exposed copper mugs and cookware in bars and restaurants, and does not apply to home use. The FDA suggests the public learn about proper care and maintenance before using copper mugs, but scientists have debunked the claim that a Moscow Mule can give you copper poisoning.

When using 100% pure copper mugs and a liquid with a pH below 6.0 (like lime juice), and that liquid remains in the mug for an extended period of time, there is a chance you could consume amounts of copper. This is the reason why it is generally a good idea to use copper mugs lined with stainless-steel .

No, never! All copper cookware, utensils or mugs should be washed by hand, no exceptions. Dishwashers typically use harsh detergent, powerful water sprays and high heat that can seriously harm your copper mug both inside and out.

Dishwashers can lead to dents, tarnishing, and flaking or cracking. So take 30 seconds to do right by your copper mugs, and wash and dry them by hand!

Lines Versus Unlined Copper Mugs

When purchasing a copper mug, there are three basic options - 100% copper, tin-lined, and copper plated.

Copper is a great thermal conductor, and will keep your drink colder for longer (or hotter for longer, depending on the drinks). This is a big part of what makes the Moscow Mule an attractive summer beverage, and why copper mugs are great for cocktails in general.

Lined copper mugs  (usually with zinc, stainless-steel  or tin) can be a great choice. The double lining improves their durability, and can give them a great look. Unlike pure copper, lined copper mugs also offer additional health benefits by avoiding reactions between acids in your drink and pure copper.

Both lined and unlined copper mugs must be washed by hand and both will develop a patina over time. Lined mugs might take slightly less time to polish, because you only need worry about the outside. However, now that you know how to clean tarnished copper mugs, it's nothing you can't handle.

Essential Tips To Care For Your Copper Mugs

Copper mugs are stylish and good for your health. They keep your cold drinks chilled, and your hot drinks steaming. Copper mugs have been used for thousands of years for water purification and health benefits, and have made a triumphant rise in popularity since the invention of the Moscow Mule in the 1940's.

Whatever you choose to put in your copper mug, remember these three simple tips:

• When serving drinks, don't let them sit for more than 4 hours. Drink up!
• After each use, take the time to hand-wash your copper mugs with soap and water, and use TWO TOWELS to dry them thoroughly.
• When your copper mug begins to tarnish, use one of the five easy and natural ways listed above to polish it to perfection.

Thank you for taking the time to become an expert on using, cleaning and caring for copper mugs. Cheers!

Did You Enjoy This Article?

Thank you for reading! If you enjoyed this article, you might also like the following articles:  Why You Should Only Use Moscow Mule Copper Mugs With Stainless Steel Lining and  Which Moscow Mule Copper Mugs Are Best?

Relevant Products

Moscow Mule Copper Mug

Leave a comment

Subscribe to our newsletter.

Receive exclusive deals and our latest blog posts straight to your inbox!