rg65 model yachts

Class: RG65

Developmental class with 650mm hull lenght, created in the 1950s.

Banquish 65

Blue Dragon

Blue Splash

Cabo Palos 65

Dragon Force 65

Electronica

Esterel 65h

JethRail RG65

JethRock RG65

JethRow RG65

Jif2 / Puma

Little Best

Mini Maniac

Mini Tux II

Mini Wizard

Mutante III

Palo de Agua

Pinguino 65

Pocket Rocket

Pro Wind 65

Round Ranger

Superdocious

Testosteron

Triple Crown 65

Vanquish 65

UNO – RG 65

RG 65 RADIO CONTROL

Technical data

UNO is the latest CYD design for RG 65 , radio control class build in series in Spain from Victor Izquierdo in Valencia the former VAM SAILS.

The hull lines are optimized for this class an all round boat balanced in all the conditions.

The construction is all carbon fibre from female CNC moulds.

© Copyright Ceccarelli Yacht Design and Engineering

• Keel bulbs pre-cast with slot , in varying weights
• Keel and rudder.
• Carbon fibre mast and booms, ball bearing raced carbon fibre gooseneck.
• Kevlar/Carbon fibre or Mylar film sails.
• Built for 6mm freestanding carbon fibre rig, shrouds can also be fitted.
• Ready to sail yachts, available complete.
• light deck with strengthened foredeck and open race cockpit.
• fits micro servo for the rudder only as deck is a deep dish profile and light.
• central radio pot with carbon fibre mainsheet post located behind it and in front of switch.
• built for AAA batteries to reduce weight, parts for larger pot can be supplied.
• 2 foredeck cut outs, large enough for standard or winch servos to go through.
• keel /mast box assembly locates standard size servo and aligns mast and keel.
• keel/mast box allows raking of mast fore and aft and has space for a mast ram.
• higher water shedding foredeck and raised cockpit.
• fits standard or micro servo for the rudder.
• 1 foredeck cut out, large enough for standard or winch servos to go through.
• keel/mast box allows raking of mast fore and aft.
• Looks like a racing keel boat, cabin provides quick access.
• Built to suit 2 standard or micro sized servos.
• Built for AA batteries and the standard 2 channel radio controls commonly available.
• Cabin deck hatch provides access to radio controls and battery.
• keel /mast box assembly locates and aligns mast and keel.

• CLASSIFIEDS
• NEWSLETTERS
• SUBMIT NEWS

The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. The simple rules are designed to encourage people to try new ideas at a modest cost. The Dragon Force 65 is a separate class but also measures as an RG65 and is eligible to race in RG65 events.

• Latest videos, from 2024

Show photos from latest 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995

3D Printed Radio Yachts

How To Design And 3D Print Rigid Lightweight Yachts To Go Racing

“Lipstick”: The Latest 3d Printed RG65

Introducing “lipstick”, the development continues…..

Introducing the latest RG65 from the combined efforts of Bill Hagerup and Selwyn Holland.

In fact this is an updated variation of the “Shrink” series that I have been sailing here in Australia. The “Glass Lady” was the last prototype in the series and can be viewed elsewhere in the site.

So what is different?

Mainly on the construction side:

• a slightly thicker hull for resilience (added 20g). The “Glass Lady” has had no problems on the water but I have had feedback from those constructing their own that during the building process they occasionally cracked something while cutting. Easy to fix at the time but an experiment with hull thicknesses totally solved the problem anyway. All part of the ongoing research and exposure of what we have learnt on the way. Hopefully others will be able to start in a more advanced position than what we did. 
• Some minor changes to how the internal running gear fits in. The original is proving very efficient and this just added a bit to it.
• The main change was the position of the mast/keel case . This was moved back 10 mm  and seems to be a slight improvement on balance/performance particularly in the heavier chop. Time will tell. The “Glass Lady” is a fast and very competitive RG and “Lipstick” is feeling just as good and so far a bit better in short chop, stronger breezes, yet still very fast in the lighter conditions. Time will tell, I can hardly wait to get it to some regattas.
• The addition of a slightly heavier 3d printed bulb and very stiff 3d printed keel to be used at those fast and furious events. As a side note, I started using a hydro-dynamically efficient 3d printed bulb a while back more as a dare to see if it could be done. It went so well that I have not bothered to take it off. I have seen no disadvantage at all compared to standard lead only bulbs and so much easier to make.
• Nothing was done to the outside surface of this model. We have discovered that the fine matte finish is no hindrance to performance and is very resilient to bumps and scraps, definitely superior to paint. So we just leave it as it is. The colour is within the printed PLA, not on the surface.

The initial trials have gone very well and this will now be my personal racing craft.

Enjoy the images.

Selwyn Holland.

Any questions can be sent to [email protected]. Be patient, I get to them as a soon as I can. I will say I am staggered and heartened by the amount of interest and the quality of the questions coming through.

Latest update:

The more I sail it, the faster it seems to want to go. The sails are a standard jib and a rather radical double luff single sheet main. The combination of both of these seems to easily keep with and often beat both the best RG65 swing rigs and now the new A+ rig on the latest DF. The A+ has a larger surface area than the maximum Rg 65 rig.

Results from our latest Club Championship round included 2 6 1 1 2 5 1 from a strong fleet of 11 yachts. That was a comfortable overall win for the round. It is rarely out of the top three in club sailing and championships. 

I can hardly wait to get it to a major RG65 competition. An earlier design won the Australia Day Regatta last year in Sydney.

RG65 RC Sailboat: Design, Racing, Building, and Maintenance Guide

• By - Kyle Hilson
• Posted on November 14, 2023 November 15, 2023
• Posted in RC Boats

The RG65 RC Sailboat is a popular model sailboat that is enjoyed by hobbyists and enthusiasts around the world. There are many different types of sailboats, but the RG65 is known for its compact size and maneuverability, making it a great choice for competitive racing and leisurely sailing alike. The sailboat’s sleek and streamlined design allows for fast speeds and easy maneuverability, while its lightweight construction further enhances its performance. The hull shape and sail design are also essential elements that have a significant impact on the boat’s performance. In the following paragraphs, we will discuss the design and performance of the RG65, as well as the racing and competition opportunities available for enthusiasts. We will also give tips for building your own RG65 and proper maintenance and care to extend the life of your sailboat.

RG65 RC Sailboat: Sleek, Streamlined Design for Optimal Performance on the Water

What is the technical specification of the RG65 RC Sailboat?

The technical specifications of the RG65 RC Sailboat include a maximum length of 65cm, maximum beam of 14cm, and minimum weight of 550g. The sail area is typically 2250cm² and the hull is made of fiberglass or other composite materials. The boat is controlled by a two channel radio system and features a keel bulb for stability.

RG65 RC Sailboat racing conquers the world with its challenging races and competitions.

RG65 RC Sailboat racing has become popular over the years, with numerous competitions worldwide. There is an increasing number of enthusiasts who are participating in these competitions. It has become a more challenging sport due to the high level of strategy and skill required to succeed. There are different types of races for different levels of skill, including local , regional , and international competitions. The RG65 Class Association oversees the most significant number of races and competitions worldwide. In 2021, the World Championship is scheduled to take place in Argentina.

The following is a table of the most crucial international RG65 RC Sailboat competitions:

What is the RG65 Class Association and what is its role in overseeing RC sailboat races and competitions worldwide?

The RG65 Class Association is a global organization that oversees RC sailboat races and competitions for the RG65 class of radio-controlled boats. Its role is to ensure fair play, safety, and consistency in racing rules and regulations worldwide.

Tips and advice for building your own RG65 RC Sailboat.

Building your own RG65 RC Sailboat can be a fulfilling experience. Here are some tips and advice for getting started:

• Choose materials based on your budget and preferences. Wood , fiberglass , and carbon fiber are typical choices.
• Select tools carefully based on the materials you’re working with, including saws, drills, sanders, and measuring tools.
• Follow detailed instructions to ensure that every component is assembled correctly.
• Get the proper measurements and dimensions for the boat since even small variations can greatly impact the boat’s performance.
• Find resources and forums online to connect with other enthusiasts and learn from their experiences. The RG65 Class Association website is an excellent source of information, including detailed instructions and plans to build your own RG65.
• Consider purchasing a kit if you’re new to building or if you prefer to avoid the complexities of sourcing individual parts.

What are some websites where you can purchase RG65 kits and materials?

Some websites where you can purchase RG65 kits and materials include Progressive RC, RC Sailboat Kits, and Sailing RC.

Maximizing the lifespan and performance of your RG65 RC sailboat: essential maintenance tips.

Proper maintenance and care are crucial for optimal performance and to extend the life of your RG65 RC Sailboat . Here are some tips to keep your boat in great condition:

• After each use, rinse the boat with fresh water and dry it thoroughly.
• Clean the sails and rigging to remove any dirt or salt buildup.
• Store the boat in a dry, cool location, ideally out of direct sunlight and away from extreme temperatures.
• Check the rigging , lines, and hardware regularly for signs of wear and damage. Replace any damaged parts promptly to avoid bigger problems.
• Before each sail, conduct a thorough pre-flight check to ensure that everything is in good condition and that the boat is running smoothly.
• Find resources and guides online or in sailing magazines that can help you learn more about maintaining and caring for your RG65 RC Sailboat . Examples of helpful websites include the RG65 Class Association website and RCGroups forum, which has a dedicated section for RG65 boats.
• Consider investing in a sail repair kit , which can come in handy in the event of tears or punctures in the sails.

What are some resources and guides available online for maintaining an RG65 RC sailboat?

There are several resources and guides available online for maintaining an RG65 RC sailboat, including forums, articles, and instructional videos. Some popular websites include Rg65.org, RCGroups.com, and Sailsetc2.com. Additionally, manufacturers of RG65 sailboats such as Goetzinger, Cheinzinger, and DMS offer maintenance tips and manuals on their websites.

Building and maintaining an RG65 RC Sailboat can be a rewarding and enjoyable hobby for enthusiasts of all ages. Whether you are interested in competitive racing or leisurely sailing, the RG65 offers a compact, nimble design that is both fast and fun to operate. With proper maintenance and care, you can extend the life of your boat and keep it running at peak performance for years to come. If you are interested in building your own RG65, there are many resources and guides available online that can help you get started. Whether you are a seasoned sailor or just starting out, the RG65 RC Sailboat is a great choice for anyone who loves the thrill of sailing on the water.

Overall, the RG65 RC Sailboat is an exciting and rewarding hobby that offers something for everyone. With its sleek design, fast speeds, and maneuverability, the RG65 is a popular choice for both competitive racing and leisurely sailing. Whether you choose to build your own boat or purchase one ready-made, taking the time to learn about maintenance and care will help ensure that your RG65 runs smoothly and lasts for years to come. So why not get started today and experience the fun of sailing with an RG65 RC Sailboat?

Previous Article

Next article.

On the 24th of June, 1978 Raul Landó, launched his Lady Susan , free sailing, Braine steered G65 at the Plaza Urquiza pond in Buenos Aires Argentina,, but this time with radio installed! This became the very first Radio G65, that is, an "RG65". And Raul has held Sail Number "1" since then. At this time, and still in force today , the fundamentals of class rules were defined:-

No multi-hull constructions permitted

Hull length 65cm 0.5cm +/-

Mast height max. 110 cm above the deck

Sail area max. 0.225 m²​

Other restrictions do not exist. It is a development class.

Simple wooden chine boats are just as permissible as Carbon fiber lightweight hulls, with the displacement of most of the designs leveling off at around 1000g.

Invasion Europe

In Europe the class began to take hold around 1998. Naturally, the spread began in the Spain first, but there are now active RG65 fleets in England, Holland, Switzerland, France, Italy, Poland, Germany and Ireland.

​ RG65 Comes to the USA

Fast forward 10 years to 2008, when Earl Boebert and Dick Lemke became interested in the Class and started talking about the boats. Earl’s club, Duke City MYC in Albuquerque, adopted the Class and built a fleet of nine boats in a few months.

The first US RG65 regatta was hosted by DCMYC in 2008, and they continue to host their annual event called "The Rio Grande Cup". Since 2008, the Class has spread across North America.

Today there are several hundred owners and probably 1,000+ boats scattered throughout the U.S.

• Classifieds
• Remember Me Forgot Password?
•   Boats Sailboats New Product HydroPro Affinity RG65 Racing Yacht exclusive to HobbyKing

• Electric Flight
• Advertising
• Our Sponsors
• Review Policies
• Terms of Service
• Privacy Policy
• Site History
• Mark Forums Read
• Member Search
• Upcoming Articles
• Do Not Sell My Data
• Manage Consent
• Back to Top

• IOM Britpop!
• RG65 Electronica

ROBOT NEWS.   Over the last few months Tony, who handles enquiries, has relocated from Nottingham  closer to Robot Yachts production facility in Sherborne, Dorset but production has not been affected..  This has involved 2 moves, the second over the summer is now nearly complete.  During this time there have been inevitable disruptions to communication and Tony's ability to respond has been limited to the essential for which we apologise.  If we have missed a response please try again and we will respond as soon as possible.  Meantime James, whose workshop facilities are not affected by the moves, is now working full time in the business and has increased production and product development activity as a consequence.

NEW CONTACT DETAILS   Please check the page header for the latest.  The moves have caused 2 changes of contact phone number and a business email address has been adopted.

PRODUCTS.  Robot Yachts is currently offering a choice of ISAF International One Metre (IOM)  and  RG65 designs.

IOM BRITPOP  This outstanding IOM design , built under licence from designer Brad Gibson, is our stella product in demand from customers worldwide.  The  BritPOP hull and foil package together with optimised rig represents a step change in One Metre performance as shown by its exceptional results since first raced in 2010.  The design has since dominated major International and National IOM events across the world and a few of its impressive list of principal race achievements to date underline its outstanding performance:- 

Robot Yachts  production BritPOPs have already proven a game changer in races at every level across the world.  The design is exceptional in a full range of conditions and in different hands.  The Robot Yachts BritPOP is now in its third year of production and we are working through our building list in date order as fast as we can.  See our  BritPOP webpage for further details and specification.

The Mark 2 version of our original product, the IOM Robot ,   continues to perform competitively and examples are seen at most of the top UK events.  This is an excellent all round design, ideal for the club racer and is in its element on a lazy light weather summer day at the local lake.  We are continuing with Robot production and development as time allows.  See the Robot webpage for specification.

  RG65

It is no surprise that these  great little “car bootable” boats that offer such a serious sailing performance are gaining momentum.  We build to order, mostly in pre-preg carbon built to deck level and supplied with our specially developed pre-preg carbon fin and rudder.  We have been developing and testing the new Electronica design by Brad Gibson and prodction will start in the new year - watch this space for information. 

GENERAL.  On a limited basis we are able to offer a few almost ready to race boats at various stages of completion, details on request. Note, you will need to order your choice of sails directly from the sailmaker as sailmakers also have extended lead times.  For all enquiries,  product information, details of our terms of business or to place an order please use the contact details shown on this web home page header.

Last update December 2014

Build your own radio controlled yacht

Are you ready to embark on the exciting journey of building your very own model rc yacht.

Our comprehensive eBook has  clear building instructions and step-by-step photography for the Racing Sparrow 750mm RC Yacht.

What we cover in our boat building eBook

Download a sample of our eBook

Even those with limited building experience can join in on the fun with minimal materials and a simple toolset. Our eBook by New Zealander Bryn Heveldt covers strip planking, fibreglass strengthening, mould and casting techniques, electrics installation, spray painting and masking, sail making and tuning.

To get started on your Racing Sparrow model RC yacht project, purchase our eBook and download the PDF now.

Racing Sparrow blog

We share tips and stories from the model boat building community. See all Blog Posts.

The Design Rationale for the RacingSparrow 750

Radio Controlled Yacht Electrics - For Beginners

Model Yacht Design: Pushing the Limits with Racing Sparrow

Using 3D Programs to Design Boats: A Beginner's Journey with Fusion 360

Free model boat plans.

We provide a number of different boat plans that you can build using techniques covered in our full eBook.

You can download plans for boats of different sizes and specifications.

What our customers say about Racing Sparrow

Being a complete novice, I purchased your book a couple of years ago and built two racing sparrows. Building on this experience I then went on to build, from scratch, an IOM (Triple Crown design). I've since joined a local club and sail virtually every weekend. I would just like to thank you for your endeavours which have allowed me to enter a world I never thought was in my reach.

John Sterland, Australia

Coming upon your book, "Build your own Radio Controlled Yacht" in the Napier Public Library, I am hugely impressed. The combination of your superb photos and illustrations with your easy writing style make it a standout publication and I hope it does well for you.

Richard Spence, New Zealand

Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove upwind remarkably well, balanced perfectly. Very impressed that a model boat can handle that with a large rig. I found the book excellent. Ive built several big boats, plus a few skiffs and without that resource building such a good boat would have been impossible.

Mike Bennett

Boats built by the Racing Sparrow community

We continue to be amazed at the beautiful model RC boats created by Racing Sparrow enthusiasts .  Send your images to info@racingsparrow.co.nz.

Take a look at the full boat gallery  page. So many fine model yachts!

Jun 19, 2019

Bryn the Authors 750

Jan 19, 2006

The woodwards Father & Son team on launch day. , New Zealand

Aug 1, 2007

Kevins stunning RG65 , New Zealand

Aug 1, 2013

More about Racing Sparrow

When I was nine years old my father, Ross Heveldt taught me to sail down at Bucklands Beach in Auckland. My wee optimist dinghy was called 'The Racing Sparrow', the nickname my uncle Bruce Curry gave to me when I was a small boy. Apparently I had an abundance of energy.

I studied at Whanganui School of Design and have been a designer / developer since 1998. I live in New Zealand.

Best wishes and happy sailing, Bryn Heveldt.

To contact me please email:  info@racingsparrow.co.nz

Rose City Model Sailing Club

Dragon Force 65

 DESIGN RULES

A one design r/c model racing yacht, the 25.8″ Dragon Force 65 was a modified RG65 Class boat derived from Mark Dick’s narrow hull RG65 ICE design. The Dragon Force features an ABS molded hull, profiled aluminum fin, molded plastic rudder, shroudless rig, carbon mast and booms, ball raced kicker/gooseneck fitting, and watertight construction. Joysway (the manufacturer) provides the Dragon Force as a near complete model requiring only assembly of the standing rigging and deck sail control lines (an A Rig is supplied), installation of keel and rudder, and addition of batteries. Electronics are installed, and a boat stand and radio/transmitter are included.

The Dragon Force 65 is the work of designers Mike Weston, John Tushingham and Mark Dicks who began collaborating with Joysway in 2011 to develop a high performing but inexpensive r/c model racing yacht. Time constraints on the project required the design team to adopt an existing class/design that had already demonstrated serious performance, and to modify the design to make it affordable. The RG65 (a developmental class) “ICE” design was considered the best candidate. To insure close performance sailing and modest cost, restricted design rules would also be required. The result was the one design Dragon Force 65 introduced in 2013. The Dragon Force 65 is already sailed worldwide with large followings around the world.

 The Dragon Force 65 Class Rules require the boat to be raced “as supplied by” the manufacturer with no modifications except those articulated in the rules as “permitted changes.” A+, A, B and C Rigs are permissible (dimensions are provided), as are after market sails. Some substitution of electronic equipment and rigging materials is  allowed as well. A number of the permitted changes improve the integrity (reliability) of the sailboat, and were added as the design team improved the manufactured product (Dragon Force 65 Version 6 is now on the market). Work on improving the Dragon Force is ongoing, and additional allowable modifications are published as “Hints & Tips”. Text of these is available at the UK Dragon Force 65 web site. An excellent illustrated version of the “ Hints & Tips ” is provided by Abersoch Boatyards in the UK.

DF 65 Registrar US https://dragonforce65.us/df65usa-registration-form/

MENTORS / BUILDING RESOURCES

Here (link to dragonforce65.us) you can find:

• US distributors of boats, accessories, and parts
• DragonForce65 Restricted Class Rules v1.8.4 (update)
• USA class registration
• Boat/sail number selection and placement
• Rigging and tuning guides & tips
• Useful Facebook sites include the “ Dragon Force ” Group s

Building / Sail Making / Resources

The files that follow are PDF’s of DF65 A, A+, B, C sails that can be printed full size. The drawings are made from data in the Class Rules and Mainsail Luff Curve reflects measurements from production sails. DF65A+ Templ

DF65A Templ 

DF65 B Templ

DF65 C Templ

Larry Sanders’ DF 65 A+ Rig Setup (pdf)

Soch Sails DF65 Rig Tuning Guide(pdf)

Chuck’s Quick & Dirty Guide for DF65 A+ Rig Kit Assembly (pdf)

Quicksilver Sails Tuning Guide (pdf)

Phil Burgess Dragonforce 65 Tuning Guide (pdf)

Abersoch boatyard service (uk) Dragonforce 65 Hints & Tips

See our LINKS Page for additional building / sailing resources.

Leave a comment Cancel reply

• Already have a WordPress.com account? Log in now.
• Subscribe Subscribed
• Copy shortlink
• Report this content
• View post in Reader
• Manage subscriptions
• Collapse this bar

• Vanquish 65
• Mini Maniac
• RG65 Appendages
• Maniac MK II
• IOM Appendages
• Marblehead Class
• Marblehead Appendages
• RT65 Ragnarok
• RT65R Armageddon
• RC65 Adrenaline
• ST65 Sowelu
• Mini40 / F48 Class
• Nightmare X
• Nightmare MK VIII
• MultiOne Class
• FireDragon 1000
• DIY Sail Winch
• Rig Building

Click the pictures to expand

Browse the pictures using the slider, click the center picture to expand

Browse the pictures using the slider, click the center picture to view the video clip.

• MYA Districts
• MYA Ranking Lists

RG65 Nationals 2023 Report and Results

• RG65 , Racing Reports

MYA RG65 UK Nationals 2023 23rd & 24th September 2023 Report by Peter Baldwin

Fifteen RG65 sailors finally made it to the starting line for the first race of this years RG65 Nationals being held at West Kirby Marine lake after moving the event from the Birkenhead Lake. It had been hoped for a fleet of nearly 20 boats, but due to a variety of reasons some boats did not enter, others dropped out at the last minute due to health reasons and Peter Baldwin opted out to run the event as Race Officer.

It was a tricky first day at West Kirby for both the sailors and Race Officer alike. After setting up a proposed course prior to the briefing with what appeared to be a steady wind direction, the wind had swung through nearly 90 degrees during the briefing and so had to be reset. This caused a 20 minute delay to the start of racing, which got underway using the outer walkway as the control area. As the day progressed, the 6 to 12 knot wind kept the Race Officer and his mark laying team busy with changes or potential changes after every few races. There were two further major changes in course area and the minor changes continued even up to the final Race (16) which was completed by 18:00hrs, resulting in a slow race pace. by this time the course was now using the Promenade as a control area. A mix of top suit swing rigs and low aspect full sized A rigs were used on day 1 as the breeze varied in strength. The day was rounded out with Graham Elliott sailing an Electronica leading the event, with Spaniard Victor Izquierdo sailing an Ivy in second and Tobias Laux also sailing an Ivy in third.

Day 2 dawned with 14 knots, gusting 20 from a SSE direction with a forecast set to move this to a Southerly and increase in strength at some point during the morning to be 20 knots with gusts of up to 30. As the wind varied in strength, there were a number of rig changes using B and C rigs, as everyone tried to make the best of the breeze. Sometimes, unfortunately, boats became over canvassed and racing was temporarily halted for a rig change at the end of a race.

At least it was mild in the breeze and there was only a small amount of rain most of it falling during an early lunch break. Course changes today were also minimal as the breeze probably only changed in direction by 20 degrees and so all racing could be conducted from the good vantage point provided by the promenade. Graham Elliott (Electronica) continued where he left off after the first day and had a dominating day winning 9 of the 15 races sailed. There were 4 race wins for Victor Izquierdo (Ivy), plus one each for Rohan Williams (Uno) and Bill Culshaw (Ivy). Tobias Laux (Ivy) also had a very consistent day, but without a win to his name.

Unfortunately the combined effects of the strong winds, leaking boats with salt water led to a good number of retirements from racing during the day, so that having started the day with a potential 12 boats racing, by the end of racing there were only 6 boats in each of the last 4 races.

The final result gave the Championship to Graham in first, well ahead of Victor in second who narrowly beat Tobias into third place. In his winners speech, Graham thanked the sailors for making the event enjoyable and thanked all of the volunteers from the club who gave up their time over the weekend, most especially to Peter Baldwin who also dropped out of sailing to run the event, all supported once again by wife Judith. Full results are below.

Related Posts

HALFPENNY Trophy, GAMES 5, 18th May 2024 – Report and Results

GUILDFORD MODEL YACHT CLUB Report by RO Martin Crysell A…

IOM Thames Trophy at Coalhouse Fort MYC 12/5/24

The fleet of 13 skippers, ranging in ability from seasoned…

Latest Eastern District 6M Results Table

Shearwater 6m open at bryc 12/5/24 – race report.

The Shearwater 6M Open event hosted by the Broads Radio…

• previous post: 2023 MYA Scottish District DF65 Championship (16th September, Barshaw Park)
• next post: 2023 Eastern District IOM league update after the Oliver Lee event at Chelmsford RYC

Frank Russell Design

R/c and model yacht design, plans, boats, sails., rg65 – 65.

Epsilon RG65 – 65 2019:    This design is based on the successful Ellipsis IOM concept, that of correct volume distribution rather than fashionable features with the emphasis on simplicity and efficiency.

After payment is made. I will email you the pdf file.

If you require another format: DXF, or DWG  or printed paper plan, postage extra.

Epsilon Basic Hull and Deck STL: This is suitable for turning into 3D drawings for 3D printing. Can also be used as is for CNC.

You should be aware that you also need to purchase the plan of the Epsilon RG to build the boat as the licence is attached to the plan not to this drawing.

Goth XP RG – RG65 Plan is the 2015 development of the FREE Goth RG Plan.

After payment is made. I will email you the pdf file with 5 A4 and 2 A3 sheets.

If you require another format: DXF, or DWG, 2D or 3D or printed paper plan, postage extra.

• CLASSIFIEDS
• NEWSLETTERS
• SUBMIT NEWS

The affordable & available ARTS (almost ready to sail) radio controlled racing yacht. The RG65 is a development class for 65cm long radio controlled yachts which means that anything not mentioned in the rules is allowed. The simple rules are designed to encourage people to try new ideas at a modest cost. The Dragon Force 65 is a separate class but also measures as an RG65 and is eligible to race in RG65 events.

• Latest videos, from 2024

Show photos from latest 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995

Just Added to Your Cart

Free shipping over $99*

30 Day Money Back Guarantee

Expert Support Staff

Country/region

• Argentina (USD $)
• Australia (USD $)
• Austria (USD $)
• Belgium (USD $)
• Brazil (USD $)
• Bulgaria (USD $)
• Canada (USD $)
• Chile (USD $)
• Costa Rica (USD $)
• Croatia (USD $)
• Cyprus (USD $)
• Czechia (USD $)
• Denmark (USD $)
• Finland (USD $)
• France (USD $)
• Germany (USD $)
• Greece (USD $)
• Hungary (USD $)
• India (USD $)
• Indonesia (USD $)
• Ireland (USD $)
• Israel (USD $)
• Italy (USD $)
• Japan (USD $)
• Latvia (USD $)
• Liechtenstein (USD $)
• Lithuania (USD $)
• Luxembourg (USD $)
• Malaysia (USD $)
• Mexico (USD $)
• Netherlands (USD $)
• New Caledonia (USD $)
• New Zealand (USD $)
• Norway (USD $)
• Philippines (USD $)
• Poland (USD $)
• Portugal (USD $)
• Qatar (USD $)
• Romania (USD $)
• Saudi Arabia (USD $)
• Singapore (USD $)
• Slovakia (USD $)
• Slovenia (USD $)
• South Korea (USD $)
• Spain (USD $)
• Sweden (USD $)
• Switzerland (USD $)
• Taiwan (USD $)
• Thailand (USD $)
• U.S. Outlying Islands (USD $)
• United Arab Emirates (USD $)
• United Kingdom (USD $)
• United States (USD $)
• Vietnam (USD $)

1-224-633-9090

• Help Center
• What is Affirm?

RC Knowledge Blog

• Suggest A Product
• Report Website Issue
• Hobby Squawk Forum
• RC Event Calendar
• Become an Affiliate

Joysway DragonForce 65 V7 655mm (25.7") Racing Sailboat - PNP

Select Product Format

Your wishlist has been temporarily saved. Please Log in to save it permanently.

Bancroft DragonForce 65 V7 655mm (25.7") Racing Sailboat from Joysway - PNP - BNC1048-002

There are few R/C modeling activities more peaceful than sailing a yacht on a summer’s evening enjoying a gentle, constant breeze on your preferred pond. Likewise, few activities can be more exciting than racing like a captain in the America’s Cup, using a model yacht against similarly-equipped competitors that places your sailing skills to the test!

Bancroft is pleased to offer the world-renown DragonForce 65 sailing yacht, a model perfectly suited to either activity. Manufactured by Joysway Model Co., it’s now available for sale through Motion RC!

Available in both PNP (no transmitter or receiver) and RTR (includes transmitter and receiver) versions, these models arrive highly prefabricated and ready for final assembly and rigging.

V7 improvements include a new, improved sail winch servo and a revised boat stand that allows either vertical or horizontal securement of the model for convenient storage, transport, or maintenance.

With active chapters in eight countries, DF racing has become an economical and enjoyable portal into the sport of RC sailing. Visit www.dfracing.world for information, rules, competition chapters, and events.

• PNP-Includes rudder servo and sail winch, requires minimum 3-channel transmitter and receiver
• Fully painted and decorated hull and sails
• Extruded carbon fiber masts and boom tubes
• Extruded aluminum keel with zinc alloy ballast bulb
• Display stand included
• Bancroft DragonForce 65 V7 655mm (25.7") Racing Sailboat - PNP
• Rudder and sail winch servos preinstalled
• 3 Channel radio - select a minimum 3 channel radio from our   Radio Collection
• 3 Channel receiver - select a minimum 3 channel receiver from our   Receiver Collection
• Eight (8) AA-sized 1.5V dry cell batteries, Alkaline or NiMH - we recommend Admiral AA NiMH 2600mAh rechargeable batteries  or  or suitable LiFe, NiMH, or LiPo battery

Product Specifications:

Spare parts, product spare parts.

SKU: BNC6026-001

SKU: BNC7009-004

SKU: BNC1042-118

SKU: BNC5072-003

SKU: BNC1047-103

SKU: BNC1047-126

SKU: BNC1047-127

SKU: BNC1047-130

SKU: BNC1048-125

SKU: BNC1048-126

SKU: BNC1048-129

SKU: BNC1048-130

SKU: BNC1048-131

SKU: BNC1048-132

SKU: BNC1048-133

SKU: BNC1048-134

SKU: BNC1048-135

SKU: BNC1048-137

SKU: BNC1048-143

SKU: BNC1048-144

SKU: BNC1048-145

SKU: BNC1048-146

SKU: BNC1048-147

SKU: BNC1048-148

SKU: BNC1048-149

SKU: BNC1048-150

SKU: BNC1048-151

SKU: BNC1048-152

SKU: BNC1048-153

SKU: BNC1048-155

SKU: BNC1048-156

SKU: BNC1048-158

0 - 32 of 84 results

{config.get('currency').get('symbol')}

Product questions & answers

NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center

Product support

Product manuals:.

• Joysway DragonForce 65 V7 655mm Racing Sailboat Instruction Manual
• Dragonforce 65 Restricted Class Rules
• Dragonforce 65 Tuning Guide

If you need any additional assistance, please visit the  Motion RC Help Center

Adding product to your cart

Customer Reviews

ARF BUNDLE - ARF plus Electronics - $219.00

Hobby Squawk Community Forum

Guidance & advice for beginners

Motion RC has a new European Website

Continue to the European site

Stay on the US site

• Choosing a selection results in a full page refresh.
• Press the space key then arrow keys to make a selection.

• Overall TT Results
• Registration

Class Rules

• Contributions Welcome

The RG65 Class is an “Open Class” which, in simple terms, means that anything that is not specifically prohibited in the rules is allowed.

The rules are managed by the RG65 International Class Association and were revised in March 2022 and comprise the following documents.

Class Rules: RG65-Rules-2022-version-2022.1

Sail Measurement Spreadsheet: RG65_Sail_Area_Calculation-2022.5.2

Self Certification Form: 2022-RG65-Measurement-Declaration-v0.6

If you have any questions about the Rules or Measurement please contact the RG65 NCA Committee using this FORM

Share this:

Powered by WordPress & Theme by Anders Norén