watermaker yacht 12v

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

In Search of the Snag-free Clew

What’s Involved in Setting Up a Lithium Battery System?

Reducing Engine Room Noise

Breaking Point: What Can Go Wrong With Your Yanmar?

Mildew-resistant Caulks for Boats

Can We Trust Plastic Boat Parts?

Repairing Molded Plastics

Mailport: Marine plywood, fuel additives, through bolt options, winch handle holders

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Safer Sailing: Add Leg Loops to Your Harness

Resurrecting Slippery Boat Shoes

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

The Ultimate Guide to Caring for Clear Plastic

• Belowdecks & Amenities
• Marine Electronics
• Systems & Propulsion

Test of Six 12-volt Watermakers

While at first blush all appear about the same size, we find important differences in output and current consumption. the spectra 180 is amazingly efficient but expensive. of the six, village marine tec's little wonder seems the most tried and true..

Last month we took an overview of the pros and cons of 12-volt watermakers. This month, we look at high-output machines from five manufacturers, ranging from systems from industry giants such as Village Marine to small shops such as SK Engineering. All of the watermakers we looked at were production models, although the Spectra 180 we tested had been re-configured to serve as a demonstration model.

As we began our market survey and field testing, we discovered that a number of other manufacturers are jumping into the fray, realizing that 12-volt watermakers constitute a small but growing segment of the market. Most notable among these new players is HRO-another industry giant-which has been promising a state-of-the-art, computer-controlled, self-contained 12-volt watermaker for more than a year. We saw the literature a year ago at the Miami Boat Show. We saw a non-operational mockup last fall at the Southampton, England boat show. We have yet to see a functional machine in the flesh.

With the assistance of Andy Cortvriend of Ocean Link, a knowledgable Portsmouth, Rhode Island, marine servicing company, we tested product output, water quality, and electrical consumption of all the watermakers. Electrical consumption was measured with a Cruising Equipment amp-hour meter, using gel cell batteries maintained at full capacity by a Heart inverter/charger between tests.

Saltwater was pulled from lower Narragansett Bay into a large storage tank maintained at a constant temperature during the tests. The waters at our Little Harbor test facility are not as clean as open ocean waters, but are closer to the reality of the watermaking most cruisers will experience. This was not a pure laboratory test with manufactured sea water of exactly the right total dissolved solids (TDS).

We then examined each machine carefully on the bench, looking for weak points, strong points, potential installation or maintenance hang-ups, and general quality of construction.

The quality of output water was tested with a TDS meter and all machines easily met standards for potability.

The real test of any watermaker is how it performs over time-not just months, but years. Because maintenance is a key factor in longevity and trouble-free operation, the owner/operator will bear a large portion of the responsibility for the long-term success of any watermaker installation.

Here are our findings.

Village Marine Little Wonder When Village Marine Tecs Little Wonder was introduced almost a decade ago, it was the first 12-volt watermaker that actually had the capacity to supply the water needs of a medium-sized cruising sailboat without almost continual running. More than 1,500 of these compact, well-made machines have been produced, and there have been virtually no changes to the design or components over the entire production run.

Both 12-volt and 24-volt models are available, with the higher voltage model producing slightly more product flow.

The standard model is totally self-contained in a well-designed package, with all components bolted to a heavy aluminum chassis, topped off with a removable aluminum cover. Mounting requires drilling through the chassis for suitable through-bolts.

The three plumbing connections-feed water, product water, and brine discharge-are pre-plumbed through one end of the case. The wiring junction box also contains connections for an optional feed water boost pump, and an internal 25-amp breaker to protect the electrics.

Although the package is tightly plumbed, there is reasonable space between components for service.

Power for the high-pressure pump is provided by a continuous-duty 1/4-hp. Pacific Scientific motor, rated at 21.5 amps at full power. The motor is connected to the high-pressure pump by a lightweight cogged belt.

The heart of the Little Wonder is its proprietary high-pressure pump, specially made by Village Marine for this machine. It features a titanium pump head with ceramic plunger-a combination which should be corrosion-proof for the life of the watermaker. All wetted parts in the pump are titanium, type 316 stainless steel, or ceramic. High-pressure plumbing and connectors are type 316 stainless.

Monitoring includes a high-pressure gauge and product flow gauge. System pressure can be adjusted if necessary using an open-end wrench, although the factory pre-set pressure of 800 psi should be correct for most watermaking situations. The pressure regulator is a high-quality regulator, rather than the more commonly seen needle-valve adjuster.

The fiberglass pressure vessel and the standard-sized 2521 membrane are both manufactured by Village Marine, although they are industry-standard in size.

In our tests, the Little Wonder produced a product flow of 5.8 gph at 13 volts, drawing 16.7 amps-about 37.4 watts per gallon. This does not include the 1-amp current draw of the small optional booster pump, which is required for above-the-waterline installations, long feed water runs, or installations containing multiple pre-filters.

The water produced by the machine we tested was very high quality. The noise level of 79 dB, with the cover removed, was louder than the two quietest machines tested, but was not loud enough to be objectionable.

The self-contained unit is 25.5″ long, 11″ wide, and 9.25″ high, and requires a slightly larger mounting space to accommodate plumbing connections and allow access for removal of fastenings holding the cover. For tight installations, a modular version is available, which does away with the mounting chassis and uses flexible high-pressure hoses rather than rigid stainless steel tubing. Obviously, installation of the modular unit requires slightly more time, but offers a lot of flexibility-very desirable in field installations aboard the typical cruising sailboat, in which locker or shelf space is at a premium.

Documentation is excellent, with a 35-page manual covering installation, operation and maintenance.

The warranty is somewhat complex. The membrane has a three year warranty, the pressure vessel a lifetime warranty, the high pressure pump a one-year warranty-although some of its internal components have only a 90-day warranty-and the electric motor 12 months. You need a flow chart to keep it straight.

The Little Wonder comes with pre-filter, three-way cleaning valve, basic plumbing connectors, and a membrane cleaning kit. You supply PVC hose, hose clamps, and the wiring connection. Options include the boost pump (standard with the modular version, $144 for the self-contained version), a three-way sampling valve ($38), a pre-plumbed fresh water flushing system ($150), hand-held salinity meter ($49), and spares kit for extended cruising ($199). For long-range cruising, all of these options are nearly essential for any properly installed watermaker.

List price of either the self-contained or modular 12-volt Little Wonder is $3,195. It is available at slight discounts through some mail-order catalogs, and there are periodic promotions at boat shows featuring special prices and thrown-in options.

Weight of the self-contained system is 63 lb. (The modular system weighs 48 lb.)

Village Marine will soon introduce a higher-output version of the Little Wonder, a 1/3-hp. watermaker in almost the same package size. Current draw, however, will be about 26 amps, requiring heavier wiring and perhaps a look at your battery capacity and charging capabilities.

Bottom Line: There are quieter 12-volt machines, more efficient ones, cheaper ones, and others that put out more water. The Little Wonder, however, has a combination of features-ease of installation, relatively low current draw, high quality components, and a 10-year track record-that is hard to beat. You can’t go wrong with this watermaker.

SK Engineering DC 150 SK Engineering is a small watermaker manufacturer based in Ft. Pierce, Florida. They do virtually no advertising, go to few boat shows, and have a very low-overhead operation geared to the Florida market. While most of their units are AC-powered, their DC 150 is a 12-volt model with a nominal output of 6 gallons per hour.

The DC 150 is powered by a 1/3-hp. continuous-duty Pacific Scientific motor rated at 26 amps. This is a larger version of the motor that powers the Village Marine Little Wonder.

The membrane is a standard 2521, and the pressure vessel appears identical to that used by Village Marine. All high-pressure fittings are type 316 stainless, as is the rigid high-pressure plumbing.

A Giant high-pressure pump provides pressure for the system. This is a standard industrial pump with a stainless steel pump head. A complete servicing manual for the pump is provided.

This is an open-frame system, with the components mounted on a heavy aluminum chassis. The footprint is 18.5″ x 12.5″, with a height of 8.5″. The pressure vessel is mounted on the outside of the chassis, increasing overall dimensions to about 25″ long outside the footprint of the mounting frame. Rubber vibration mounts are provided to isolate the chassis, reducing noise and vibration.

System pressure is user controllable via a knob-operated valve on the panel. Monitoring capabilities include system pressure and product water flow.

In operation, the DC 150 was one of the quietest machines tested, producing a maximum of 72 dB of noise. Product flow of the test machine was 6.5 gallons at 800 psi, with the motor drawing 21.3 amps at 13 volts. This translates into electrical consumption of 42.6 watts per gallon of water produced. As with other systems, adding a booster pump for above-waterline installations would add to total current draw. SK states that the system will operate without a booster pump in installations up to 2′ above the waterline.

One of the nicer features of this machine is the availability of a remote operating panel. This option allows routine operation of the system without direct access to the watermaker itself, which greatly increases installation flexibility.

The system is supplied with a pre-filter with a vacuum gauge, allowing you to monitor the condition of the filter without opening the housing. A freshwater flush kit-highly-desirable in any installation-is a $125 option. The 12-volt booster pump, drawing 1 amp, is a $120 option. An extensive cruising kit, including 12 pre-filters, rebuild parts for the high-pressure pump, cleaner, preservative, and other spares, costs $330.

SKs pricing is very competitive. The self-contained DC 150 has a list price of $2,740, but has a discount price-which we suspect would be available to most sailors who approach the manufacturer directly-of $2,350. The remote panel version has a discount price of $2,450, although the list price jumps to $3,140.

The system documentation is basic, but adequate. Total system weight is 74 lbs.

Being a small manufacturer, SK has a limited network of regular servicing dealers, but since all the system components are essentially off-the-shelf items, any good watermaker technician could repair the unit if necessary.

This is a quiet system with high-quality components and a great deal of installation flexibility when coupled with the optional 8″ x 8″ remote panel. Its open-frame design is easily serviced, although the package is not as neat as a totally enclosed package like the Little Wonder.

Bottom Line: With its 1/3-hp. motor, electrical installation will require careful thought, and you will need to look at your entire charging system and battery capacity a little more closely than you would with a 1/4-hp. machine.

The low price makes this system worth looking at. It is simple, soundly engineered, and utilizes good quality, standard components that are easily serviced. The only potential drawback is the small size of the manufacturer, which might limit long-term support.

PUR PowerSurvivor 160E The PowerSurvivor 160E is PURs entry into the high-output 12-volt watermaker market. It is the latest in a long line of machines that dates back to the PowerSurvivor 35, the first practical small 12-volt watermaking system.

The 160E uses a standard 2521 membrane in a proprietary housing. It is a dead-simple modular system, utilizing a Leeson 1/3-hp. motor directly coupled to a proprietary stainless steel high-pressure pump. Flexible high-pressure hose between the pump and the pressure vessel allows a great deal of mounting versatility, including bolting the entire system to a bulkhead. All high-pressure fittings are 316 stainless steel.

At 54 lbs. for the entire system, this is one of the lightest high-output watermakers we tested.

When we say dead-simple, we mean it. Other than the pressure bypass valve and the on-off switch-which you provide-there are no gauges to monitor, no product flow meter, and no means of adjusting system pressure, which is pre-set at the factory and is not intended to be user-adjusted. You would still, of course, install the product sampling valve, cleaning valve, and pre-filter, just as with all other units.

The 160E is a gravity feed system, and can only be installed below the waterline.

Our test machine produced 6.5 gallons of water per hour, drawing 17.3 amps at 13 volts-less than we would expect for a 1/3-hp. system. This yields an energy consumption of 34.6 watts per gallon of water-more efficient than average for the watermakers in our tests.

There are several drawbacks to the PowerSurvivor 160E. First, the system is the noisiest of any we tested, putting out 80 dB at our standard test distance of 1′. Furthermore, the reciprocating drive system of the high-pressure pump produces not a steady noise, but one punctuated by a loud popping sound at one stage of the piston stroke. We would recommend mounting this watermaker in a sound-insulated compartment if possible.

The reciprocating pump also produces pulsing in the systems hoses, which should be well-secured to prevent fatigue over time.

This is one of the more expensive watermakers we tested, with a list price of $4,440. Several discount marine catalogs sell the 160E for as low as $3,800. Options include a repair seal kit ($80), an extended cruise kit ($200), and an extensive preventative maintenance package ($420).

On the plus side, routine service of the system, including replacement of high-pressure pump seals-a requirement every 1,000 hours of operation-is simple and well-documented in the excellent instruction manual.

We also looked at two other units from PUR, the PowerSurvivor 80II modular and the newly-designed PowerSurvivor 40E. The 80II is very similar to the 160E, simply scaled down. We did not test it, but since all the other PUR machines met the manufacturers specifications, we expect this one to do the same. The smaller-diameter membrane of the 80II limits you to membranes from the machines manufacturer. It lists for $3,330, and is routinely discounted to about $2,950-about the same as the higher-output Little Wonder.

The PowerSurvivor 40E is the totally re-designed successor to the PowerSurvivor 35, the original high-output 12-volt watermaker. In our tests, its 1/18-hp. motor drew 4.8 amps, producing about 1.6 gallons per hour, consuming 39 watts per gallon of water. It is very compact, and like all PUR watermakers, easy to service and operate.

At 72 dB, its noise level was the equivalent of the quieter large 12-volt machines.

With its light weight (25 lbs.) and tiny footprint-about 15-1/2″ x 15″ x 6″ high-the 40E would be the most suitable watermaker for a single sailor or a couple cruising on a small or very light boat-a multihull, for example-with limited electrical generating capacities, perhaps just a few solar panels and small batteries.

In an emergency, the motor can be disconnected from the 40E, and it can be operated manually by a handle, just like its Survivor 35 predecessor. Because virtually all the parts of the 40E are proprietary, including the pressure vessel, membrane, and pump, you will only be able to service the units with parts from PUR.

List price of the 40E is $2,220/$1,900 discount, with options analogous to those available for larger PUR machines.

Bottom Line: All three of these smaller watermakers are actually the core business for PUR, and fill specific niches where there is no competition. Although the 160e is an easily serviced watermaker, and is more efficient than average, its high price and noisy operation are drawbacks. If the installation flexibility of the 160E is not essential to you, we think there are other 12-volt watermakers of similar capacity and quality of construction that offer better value.

Caribbean Technology The Caribbean Technology YM-200 DC 12 made by Great Water is the highest-capacity 12-volt watermaker we tested. Its rated output of 10.2 gph at 800 psi significantly exceeds that of most of the watermakers in our test.

In many ways, this modular system mimics both the output and sophistication levels of more mainstream engine-driven or 110-volt systems, including a direct drive high-pressure pump, high and low pressure automatic shutoff, and a sophisticated remote operating panel including power switch, pressure regulator, and gauges for system pressure, product water flow, and brine flow.

Power is provided by a 1/2-hp. continuous-duty motor directly coupled to a stainless steel Wanner Hydracell industrial pump. An instruction manual for the pump leads you through the periodic maintenance required. A new oil venting system in the pump claims to have eliminated an earlier tendency of Wanner pumps to weep oil.

A Codeline pressure vessel holds a standard 2521 membrane. Because this is a modular system, high-pressure plumbing includes flexible hose rather than rigid tubing. All fittings are 316 stainless steel.

A Flojet boost pump is standard, allowing the system to be mounted above the waterline. This pump-actually designed as a shower drain pump-adds 3.6 amps to the current draw of the system.

A product flow rate of 10.2 gph is pretty much the absolute capacity of a 2521 membrane, and our test system had no trouble achieving that rate of flow. The downside is that to achieve this flow, the electrical demands of the system are much higher than any other watermaker we tested: 38 amps at 13 volts, or 48.4 watts per gallon.

You would never run this system without running the engine at the same time. The current draw is high enough to drop system voltage down instantly. In all fairness, for maximum efficiency none of the systems drawing 15 amps or more should be operated without running the engine at the same time.

Because of the high current draw, your charging system should be equipped with a big alternator if you choose this watermaker. To take advantage of the big alternators capacity, youll want a big bank of batteries. The system will probably need a 50-amp circuit breaker separate from the main panel, as many main panels do not have service wiring that is really heavy enough for this type of load.

You will also need heavy wiring between the circuit breaker and the systems electrical relay box. The manufacturer recommends 4-gauge wiring, which is heavy and may in some cases be difficult to run.

Obviously, a great deal of planning and thought is required before installing a system of this capacity and with these electrical requirements.

On the plus side, the fully modular design allows the system to be mounted in a surprisingly small space, essentially little more space than is required by a modular 6-gph system.

Weight of the YM-200 is 83 lbs.

The manual includes excellent system schematics, and reasonably thorough instructions for installation, operation, and maintenance of the watermaker.

As you might expect, the size of the pumps and motors result in a fairly noisy system: 80 dB at a distance of 1′ from the high-pressure pump-the big noisemaker in any system. Due to its weight, electrical needs, and noise, the best location for this watermaker is a sound-insulated engine room or compartment, as close as possible to the ships electrical supply.

Bottom Line: The best application for this system is a larger boat with existing electrical capacity, and lacks a genset or a means of installing an engine-driven watermaker.

With a list price of $3,500-which is sometimes discounted through dealers-this is not an expensive system. In fact, on a dollar cost per gallon of water produced per hour basis, this is the cheapest system of the entire lot to purchase. It is not an electrically efficient system, but if the maximum output in the minimum time is your primary criterion in a 12-volt watermaker, the Caribbean Technology is definitely worth considering.

Spectra 180 The Spectra 180, and a few variations on its basic version, are the only watermakers produced by Edinger Marine Services. It is radically different from other 12-volt watermakers, extracting a lot of freshwater with astonishingly low power consumption.

When you first see the Spectra 180, your first impression is that one component-a big DC motor to power the high-pressure pump-has been left out. In fact, the entire system is powered by a small 12-volt pump and motor-about 1/8-hp.-no larger than the water pressure pump on a 35-footer. This is possible due to the unique design of the Clark pump, a remarkably energy-efficient pump created specifically to power this watermaker.

The Clark pump is totally unlike any other high-pressure pump used in watermakers. To oversimplify, the Clark uses two opposing pistons and cylinders with a single connecting rod. System pressure is created by the connecting rod driving the piston into the opposite cylinder. Without a detailed technical explanation of exactly how any why this works, it is fair to say that compared to other methods of creating adequate pressure for reverse osmosis, this is a remarkably energy-efficient system.

The Spectra 180 is also different from other watermakers in that it uses a standard full-size membrane whose pressure vessel is just over 44″ long-almost twice the length of the pressure vessel containing the 2521 membrane used by all the other high-capacity systems in out tests. Mounting this much longer pressure vessel may present problems in some boats. The Clark Pump housing itself is almost as long as the pressure vessel for a 2521 membrane.

According to the manufacturer, they have torn down Clark pumps after 3,000 hours of operation and found no significant wear. In any case, the pump is easy to overhaul in the field by a reasonably proficient owner. An overhaul manual for the pump is part of the system documentation, which is basic but adequate.

This is a modular system, with a remote control panel that can allow basic operation without direct access to the other system components. Total weight is about 51 lbs.

Our test system was a factory demonstrator, configured as a self-contained frame system with some performance compromises compared to the correct, conventional modular installation. Instead of a single large membrane, our test system utilized two 2521 membranes, similar in flux area to the larger membrane.

From a pure electrical efficiency perspective, the Spectra 180 was the most impressive watermaker we tested. With a current draw of 8.6 amps at 13 volts, our test unit pumped out fresh water at the rate of almost 9.5 gph–almost as much as the Great Water system, which draws almost five times as much power. Thats only 11.8 watts per gallon, by light years the most electrically efficient machine in our test.

In addition, at a noise level of 65 dB, this was the quietest system.

The Spectra 180 is not perfect, however. The system runs at low pressure compared to other systems-just 600 psi with our 70F water temperature-and the product water, although perfectly acceptable, had the highest total dissolved solids in our tests. Since product water quality can vary with different membranes, we are reluctant to attach much significance to this slightly lower water quality, which was still well within standards for drinking water.

We have some concerns about the relatively low feed water flow rate through the big membrane. The more water that passes over a membrane, the better it likes it, according to most manufacturers. The Spectras flow rate of about 90 gph is quite small for the large membrane, and we do not know how the longevity of the membrane might be impacted by this.

The ends of the main block of our systems Clark pump were machined from bronze, and showed some signs of surface oxidation at the interface to the Delrin main block. According to the manufacturer, future editions of the Spectra will have stainless steel components in place of bronze.

Likewise, the pressure relief needle valve on our test system dribbled when it was barely cracked open. We were told that this component has also been re-designed.

Our test system utilized brass high-pressure fittings, rather than the type 316 stainless used by every other manufacturer. Some manufacturers claim that the only reason to use brass is to save money, while others admitted to us, a bit reluctantly, that they had never seen a brass high-pressure fitting with significant corrosion, and stainless was generally used for appearance and galvanic compatibility as much as for longevity purposes.

Given the cost of the Spectra 180, we think you should get type 316 stainless fittings, and type 316 pump block components. The price of the Spectra 180 is $4,650, the highest of any machine we tested. You pay a significant premium for a major increase in electrical efficiency. Service, parts, and options prices are similar to those of other manufacturers: $350 for a long-term offshore service kit, for example. The price of the installation kit-$275-strikes us as a bit high for such parts as the three-way servicing and diverting valves that some other manufacturers include in the price of the basic system.

According to the manufacturer, although the system is fully functional and in production, they are still looking at further developments, including a composite Clark pump that would have no metal components. Relatively few of these machines are in use in the field at this time, as the product is quite new to the market.

Bottom Line: The most attractive feature of this system is its energy efficiency. We are less impressed by its price, and by the fact that it would appear to be a system with some room for refinement. However, if being able to run a watermaker without running the engine at the same time is important to you, and if price is less important than electrical efficiency, the Spectra 180 would be the choice among the systems we tested.

Conclusions/Recommendations Because virtually every cruising boat has different needs, priorities, and installation requirements, no single high-capacity 12-volt watermaker is going to fit the bill for every sailor. These are all well-designed, fully functional machines. Each has specific advantages and disadvantages, which we have described.

All meet their manufacturers performance specifications in terms of electrical consumption and product water output. Variances of +/- 10% to 15% from the manufacturers specifications for performance are normal.

The variations in product water quality we found are not significant. All the watermakers produce water that meets international standards for potability. The quality of the water will vary over time with any watermaker and with any membrane. A simple hand salinity tester-available from most watermaker manufacturers-is all that is required for routine checking of water quality. Most owners who use their watermakers daily don’t even bother testing salinity. They start the machine, let it run for a few minutes, taste the water, and if it tastes good, divert it to the tank.

All watermakers have similar maintenance requirements, and all we tested are reasonably easy to service. Your choice of a specific system will be largely the result of specific requirements for your boat and your cruising. The key questions are the amount and shape of space you have for the watermaker, the existing or planned electrical generating and battery storage capacity of your boat, and the amount of water you must make in a specific time frame.

All watermakers are maintenance-intensive. To a large extent, the long-term, hassle-free operation of a watermaker is a function of where and how it is used, and how religiously routine maintenance is performed. None of these machines will stand abuse.

A freshwater flushing system is an important component of a watermaker installation. Of the machines tested, only Village Marine and SK Engineering offer a ready-made freshwater back flush system as an option. While it is an easy system to design and build for anyone capable of installing a watermaker, it should be offered and recommended as an option by other manufacturers as well.

None of these systems is beyond the installation capabilities of a reasonably handy boat owner. If space permits, a totally self-contained system such as Village Marines Little Wonder will be slightly easier to install, but the total difference in installation time between self-contained and modular systems should not be more than a few hours unless there are vexing component mounting problems to solve. Plumbing and wiring connections are essentially the same for modular and self-contained systems, although a modular system with a remote panel will certainly take the longest time to install because of the number of individual components that must be placed.

All installations require attention to detail, particularly when it comes to wiring. We would not recommend you install a watermaker as the first major project you undertake on your boat, since it will require putting in a through-hull, installing heavy-duty wiring, and completing some plumbing that may in some boats be more difficult than it may first appear.

While all watermakers are covered by manufacturers warranties, all specifically exclude damage due to abuse in operation, poor maintenance, or improper installation.

A watermaker is not a use-it-and-forget-it product. Its for those who live aboard. If you don’t use it regularly and maintain it properly, you are wasting your money, and you shouldnt own one. On the other hand, if you are willing to accept the responsibility of maintaining a fairly demanding piece of equipment, a 12-volt watermaker can give you-particularly if you are a cruising sailor who desires long-term independence from shore-a degree of freedom you may not otherwise find.

Contacts- Edinger Marine Service, Inc., 298 Harbor Dr., Sausalito, CA 94965; 415/332-3780, fax 415/332-8527. Great Water, Inc., 5148 Peach St. Erie, PA 16509; 814/838-0786, fax 814/838-8700. Ocean Link, 52 Maritime Dr., Portsmouth, RI 02871; 401/683-4434. PUR, Recovery Engineering, 9300 75th Ave. North, Minneapolis, MN 55428; 800/845-7873, fax 312/315-5505. SK Engineering, 4256 N. US 1, Suite 1, Ft. Pierce, FL 34946; 800/489-0852, fax 561/489-0808. Village Marine Tec., 2000 West 135th St., Gardena, CA 90249; 800/421-4503, fax 310/538-3048.

RELATED ARTICLES MORE FROM AUTHOR

Excellent article, thank you for the research and detailed info.

Agree! Thank YOU

I really appreciated reading your recommendation, especially power consumption from one manufacturer to the other.

I am some how confused with Spectra manufacturing and Katadyn. I thought it was all Katadyn for some time now. When was this test done?.

Great review, except it would have been helpful to have specific TDS figures for the output in each case.

The contact information for SK engineering is wrong. Went to some health insurance company that sounded like a scam.

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

Island Packet 370: What You Should Know | Boat Review

How To Make Starlink Better On Your Boat | Interview

Catalina 380: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Portable and Installed Watermakers
• FIND A DEALER >

• AC Electric
• Petrol (Gasoline)
• 12VDC Electric
• Control Panel
• Autoflush System
• Plumbing Install Kit
• Hydrotester
• Prefilter Cartridge
• Pickling Solution Mix
• Lift Pump Impeller
• RO Membranes
• High Pressure Hose
• Case Studies
• Testimonials
• Applications
• Desalination Theory
• Detailed Schematic
• Dealers List
• Dealers Map
• OEM Partners
• Troubleshooting
• Installation
• Manuals + Downloads
• Sales Enquiry
• Support Request

Rainman 12 Volt DC Water Maker

The 12VDC system is the Rainman watermaker that consumes the least power.

It’s a very simple and highly reliable system that can make up to 34 litres (9 gallons) of fresh potable water per hour.

Options exist for this system to be run completely portable without any plumbing or fully plumbed in with a minimum footprint installation.

Our 12VDC system is a great option if you don’t have AC power available to you but want to avoid the complexities and maintenance requirements of more efficient energy recovery systems.

Two Components – One Watermaker

The system is made up of a pressure supply unit (PSU) and a reverse osmosis unit (RO). Both parts are required to make a complete watermaker.

The PSU lifts the seawater, filters out the sediment and puts the system under high pressure, while the RO unit extracts fresh water from the stream of pressurised seawater. Most of the water goes out to waste as brine output, while about 20% of the volume is extracted as fresh potable water for your tanks.

Unlike the AC (electric) or petrol (gasoline) powered Rainman Watermaker, the 12VDC is compatible only with the single 40″ RO membrane.

• Comparison: 12 volt vs petrol watermaker »
• Comparison: 12 volt vs AC (electric) watermaker »

With recent advancements batteries, solar, and wind power, it is easier than ever to have sufficient useable amp-hours available for running your appliances.

Our 12VDC system requires 410 watts, or about 30 amps, to operate.

Installed or Portable

Our traditional system in the blue case can be used as either portable or installed. If you wish to install it, it becomes a two box installation. Various approaches that can be utilised include:

• Keep it portable, pulling it out and setting it up each time you wish to use it.
• Leave the unit in a locker, but pull out the hoses and throw overboard to make water, avoiding the need to move the system around on your deck.
• Keep the system portable, but use a cam-lock fitting to temporarily plumb the system into a teed deck wash fitting. This gives the benefits of an installed system while using your portable unit while underway.
• Fully plumb the system in, including the autoflush system.

It is worth noting that due to the lower output and shorter power cord of our 12VDC, most customers with this system will choose to fully install the watermaker.

Reverse Osmosis Unit

Due to the lower flow rate of the 12VDC PSU, only the single 40″ membrane configuration of the Economy RO unit is supported. This can either be in the traditional blue case or Naked in the easy mounting bracket.

This system will make 26-34 litres per hour (7-9gph).

More information about reverse osmosis »

Case or Naked

The system can be purchased either as the traditional blue case version or in the Naked configuration. The pricing, performance and power consumption are identical between the two options, so your specific requirements control which is best suited for your application. The table summarises the differences between the two options.

The optional control panel provides a remote management capability for your installed Rainman watermaker. It’s a highly presentable and functional add-on component that will enhance your Rainman user experience. 

It is an injection moulded ASA acrylic panel that remains true to Rainman’s reputation of elegant simplicity. 

• Integration with the Rainman autoflush system, triggers flush cycle after powering the watermaker off.
• Built in tri-colour LED salinity sensor indicates when water is good to route to your tank.
• Can be installed flush mounted, standalone with the included enclosure box, or even externally with the optional hatch.
• Simple installation with no high pressure fittings or high voltage wiring.
• Backwards compatible if you already have an installed electric naked or cased Rainman.

More information about the Rainman control panel »

Your Rainman watermaker is a very robust piece of equipment, but caring for certain aspects will prolong its life. Regularly flushing your Rainman with fresh water will maximise the life of your watermaker membranes.

The optional autoflush system incorporates a solid state programmable timer that will flush your Rainman watermaker after each use and every seven days thereafter. It incorporates built in protection if your boat loses power during or between flush cycles.

More information about the Rainman autoflush system »

Optional Accessories

While the base system will be sufficient for many customers, a number of options are available to get more out of your Rainman watermaker.

• The plumbing installation kit is included with the Naked Rainman systems, but can also be a very useful option if you plan to install your Cased Rainman units.
• A hydrotester will give you indication of the total dissolved solids (TDS) so you can know how your membranes are ageing.

Rainman desalinator optional accessories »

Spares and Consumables

Your new Rainman system will arrive with enough spares and consumables to keep you going for a while, so most customers do not need to order more with initial purchase. There are a variety of items you will need over time to keep your system running for many years.

Rainman Watermaker spare parts and consumables »

12VDC System Options Gallery

Cased Economy RO

1 x 40″ Membrane

Naked Economy RO

5 Best Watermakers for Sailboats

Last Updated by

Daniel Wade

June 15, 2022

With the right Watermaker, the ocean becomes an almost immeasurable supply of fresh and clean drinking water to keep you hydrated during your offshore sailing adventures.

Many sailors do spend a lot of their time and money on various parts of the sailboat including the sails, engine, electronics, and generators especially when preparing for long-distance voyages.

While there's absolutely nothing wrong with this, they often overlook one crucial part of general human survival: having an ample supply of fresh drinking water.

Whether you have freshwater drinking tanks on your sailboat or planning to cruise in areas where you can easily access clean drinking water, the hassle involved in having to come to the dock to fill the water tanks can be quite overwhelming.

This is exactly why you need to find the best watermakers for sailboats.

Like many other nautical technologies, watermakers have significantly advanced in the last few decades to become very efficient and more reliable. They're no longer a luxury on your sailboat but a necessity. Better still, watermakers have become relatively affordable and are meant to keep you hydrated as you explore areas that do not have clean and fresh drinking water.

In this article, we'll take a look at how watermaker systems work, highlight its benefits, and highlight the best sailboat watermakers on the market right now. At the end of this read, you should be able to choose the best watermaker for your sailboat.

Table of contents

Benefits of Having a Watermaker on Your Sailboat

The freedom and security that come with having full water tanks on your sailboat are of immense importance, especially if you're cruising in an area where fresh drinking water is hard to come by and quite expensive when you do. As such, having a watermaker aboard your sailboat is no longer a luxury like it used to be in the past. With a steady supply of fresh and clean water, your life on the sailboat will be a lot better. This is because you'll have enough clean water to drink, cook, wash, and shower, which is beneficial if you want to enjoy your sailing adventures.

Honestly speaking, many sailors do not actually need a watermaker. Well, if you're planning to sail just near the shores, then there's a chance that you can easily access fresh and clean water by the dock. But this can be limiting if you've been dreaming of going off the grid and sailing to some exotic and unknown places in the world.

With that in mind, a watermaker makes a lot of sense to most sailors. You won't have to worry about having to carry aboard gallons of fresh water for cooking and drinking during your voyage. You won't have to treat freshwater as a precious commodity that must last until you can refill at the next port. With a watermaker, you can simply go ocean crossing without worrying about running out of water.

A watermaker allows you to have a steady supply of fresh and clean water to keep everybody well-hydrated and healthy. You can clean the water anytime you feel like and all you have to do is replace the filter once in a while and you'll be good to go. In essence, a watermaker is probably one of the most important equipment to have aboard your sailboat, so installing it is of great importance if you're a serious sailor.

The Basics of Modern Marine Watermakers

Modern marine watermakers essentially follow the principle of reverse-osmosis to produce pure, drinking water from seawater. During this process and through very high pressure, seawater is forced through a semipermeable membrane that only allows freshwater molecules to pass through it but not salt, bacteria, or any other organic material. The newly made pure, drinking water is then piped to the sailboat's water tanks while the leftover (brine) is discharged overboard.

Even though marine watermakers may differ in the type of pump that's employed and how it is driven, this is one of the most important features in every watermaker. In most cases, water can be electrically pumped or powered directly off the boat's engine. If you have an AC generator or alternator on your boat, it would make much sense to use the AC output to drive the watermaker directly. You can also choose the DC-powered models if you rely on renewable energy from solar or wind. Alternatively, you can still go for AC-powered watermakers but you'll have to buy an inverter.

All in all, DC-powered watermakers are more efficient since they integrate a power-saving energy recovery system (ERS). You must, however, keep in mind that your energy consumption levels might be quite high if you're sailing in colder and saltier areas. This is because the water purification process might be a bit slower in such areas. As such, you should consider investing in a more high-powered watermaker system if you will be sailing in colder and saltier areas than if you're planning to sail more in warm and less salty areas.

As far as an engine-driven watermaker is concerned, you should mount the high-pressure pump on the engine so that it can be belt-driven using an automatic clutch. An engine-driven watermaker should be your first option if you want large quantities of fresh drinking water. This is more productive than AC or DC-powered watermakers. Even with a relatively small engine, this setup has an automatic regulator that constantly pumps the water. With that in mind, engine-driven watermakers are ideal if you want to reduce your energy consumption. To put it into perspective, an engine-driven watermaker can lower energy consumption by an enormous 80%, especially when compared with conventional AC or DC-powered watermaker systems.

How to Choose the Best Watermaker for Your Sailboat

There are many factors to consider when looking for the best watermakers for your sailboat. Here are the most important things to consider.

Your Freshwater Needs

One of the most important things to consider before spending your money on a watermaker is your freshwater needs. What quantity would be enough to keep you going on your sailing adventure? While the quantity might differ from one sailor to the other or from one boat to the other, you should consider the number of gallons that a particular watermaker can produce per day. This will help you in choosing the ideal watermaker; a model that will ensure that you never run out of water. Do not underestimate your water needs, especially if you're planning to sail with your children or if you're planning to stay on the boat for an extended period of time.

Do you have enough space on your vessel to accommodate the type of watermaker you're looking to buy? While most watermakers are designed to fit in the smallest of space, you should consider the actual size of the watermaker and find out whether you have enough space on your vessel to fix it.

Watermakers can run on electricity, renewable energy such as wind and solar (if you have them on your vessel), or both. When looking for the perfect watermaker, you should consider how to power it and whether or not the watermaker has low-energy consumption, which is definitely a great feature. Again, there are also engine-driven watermakers, so it's important to know exactly what you're going for.

Maintenance

Watermakers have a reputation for being difficult to maintain. Fortunately, the equipment and components have improved in the last few years so you should go for a model that's easy to maintain. You should use the watermaker in water bodies that look good, You should avoid using the watermaker in dirty harbors as you may have to change the filters every so often or even damage your watermaker altogether.

Best Watermakers for Sailboats

Let's take a look at the best watermakers available on the market right now.

The Ultra Whisper

Engineered by limited electrical options that can run on either DC or AC, THE Ultra Whisper by Sea Recovery is one of the best watermakers currently available on the market. In addition to being very quiet, this watermaker features an automatic operation that requires very minimal operator adjustment.

This watermaker is ideal for small powerboats and sailboats since it can serve as an efficient water supply. This model boasts about a 75% reduction in power consumption, especially when compared to other models.

• ‍ Smooth and quiet water production
• Can produce up to 2,280 liters per day
• Ideal for small boats
• It is energy efficient
• ‍ It might not be perfect for large boats

Echotec Watermaker

If you want a watermaker model that can produce 60 liters per hour flawlessly and with no maintenance apart from changing the filters, look no further than the Echotec Watermaker. This model is designed for ultra-reliable performance and easy customer installation.

This watermaker is made from high-quality components that can withstand the continuous harsh marine environment, making it one of the most durable watermakers on the market. This is essentially a series of modular watermakers ranging from 12-volt to 24-volt DC-powered models. They bring forth energy efficiency, a computerized energy recovery system, and ultimate reliability to ensure that you never run out of fresh drinking water while out there on the sea.

• ‍ Energy efficient
• Cost-effective
• ‍ Comes with a very low speed
• Not ideal for large boats

Spectra Katadyn PowerSurvivor

As a compact and energy-efficient watermaker, the Spectra Katadyn PowerSurvivor is arguably the most affordable watermaker currently available on the market. We are talking about a model that only requires 4 amps to desalinate water for your sailboat. It can produce 1.5 gallons of fresh drinking water per hour, which is an excellent return for a watermaker of its size.

It is also one of the most portable watermakers around. You can choose to either install it permanently or temporarily in case you want to take it somewhere else. This portability is also essential if you're looking for a space-saving model that can fit in the smallest of compartments. Its simple but rugged design is essential in ensuring that it can perform at its best even in harsh marine conditions. In terms of its power capabilities, this is the only model on the market that will convert to a hand-operated system or manual power if there's a power shortage.

• ‍ Portable and lightweight
• Rugged design to withstand harsh marine environments
• Efficient and reliable
• Can revert to manual power if there's a power shortage
• Perfect for off-grid sailing
• ‍ Gasoline or diesel can easily damage the semi-permeable membrane

Village Marine - Little Wonder Series

Whether you're looking for a watermaker for your small sailboat or looking for a watermaker that can efficiently serve those huge yachts, the Village Marine Little Wonder Series provides everything. This model is meant for experienced sailors who are looking for various capacity options. This watermaker weighs just about 69 pounds but can produce nearly 180 gallons of fresh drinking water each day.

Designed with a low RPM high-pressure pump, this model remains one of the most efficient and economical watermakers on the market. That's not all; this watermaker is designed with corrosion-resistant features and is one of the most serviceable watermakers in the game. It is reliable, quiet, and portable; all factors that make a watermaker great.

• ‍ Easy to operate
• Corrosion-resistant
• Easy to maintain
• Quiet and versatile
• ‍ It doesn't have automatic adjustment controls

Ventura 150 Watermaker

This is one of the most versatile watermakers on the market. It can use both electricity and renewable energy. This model is engineered to be lightweight and energy-efficient and its compact and modular design makes it a great option if you're looking for a watermaker that's easy to use and install in confined spaces.

The Ventura 150 watermaker is highly efficient as it can produce over 6 gallons of water an hour, which makes it quite perfect for small vessels. This sailboat watermaker features a controller that allows you to operate and monitor the device remotely. It also has the auto store button that will automatically flash the system after every five days.

This watermaker is quiet and surprisingly compact despite its ability to produce about 150 gallons of water per day. It also gives you the option of going for the automated manual or manual model.

• ‍ Very versatile
• Can use both electricity and renewable energy power
• It is smooth and quiet
• It is compact and lightweight
• ‍ The manual model has analog controls

To this end, it's easy to see that having an ideal watermaker aboard your vessel is one of the first crucial steps towards being self-sufficient and sustainable. With a watermaker, you'll be able to access fresh drinking water at all times when sailing even in far-flung places. Most of these models are well-constructed and incorporate some of the best technologies that make them efficient, reliable, and easy to install, use, and maintain.

So when it comes to choosing the best watermaker for your sailboat, it may all come down to what is ideal for you in terms of energy consumption, efficiency, the quantity of water produced, among many other things. With an ideal watermaker, you can remain off the grid for as long as you want without ever worrying about running out of water and this is of great importance in enjoying your sailing adventures.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Sailboat Upgrades

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

How To Choose The Right Sailing Instructor

August 16, 2023

Cost To Sail Around The World

May 16, 2023

Small Sailboat Sizes: A Complete Guide

October 30, 2022

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

7 Best Sailboat Watermakers For Liveaboards 2024

If you’re a liveaboard sailor looking for the best sailboat watermaker then you’ve come to the right place. In this blog post, we’ll take a look at some of the best watermakers on the market and show you how they can help make your sailing experience more enjoyable.

There’s nothing quite like the freedom of sailing on the open water. If you’re a liveaboard sailor, though, you know that keeping your boat stocked with fresh water can be a challenge. That’s where sailboat watermakers come in handy.

Not only do they produce fresh water for drinking and cooking, but they also help keep your boat clean by providing water for showers and dishes.

In this blog post, we’ll take a look at the best sailboat watermakers available on the market today. We’ll discuss the pros and cons of each model so that you can make an informed decision before purchasing one for your boat.

So, whether you’re looking for a compact unit that is easy to install or a high-performance model that can handle large volumes of water, we have something for you. Keep reading to learn more.

How do marine watermakers work?

What are the benefits of having a watermaker on your sailboat.

• How do I choose a sailboat watermaker?

How big a water maker do I need?

How much does a sailboat watermaker cost, how much power does a watermaker use, how much space does a marine watermaker take up, maintaining your sailboat watermaker, the best sailboat watermakers for liveaboards.

As an Amazon Associate, we earn from qualifying purchases. We also earn from other affiliate programs. This means we may receive a small commission on products purchased through our links at no extra cost to you.

Marine watermakers are devices that convert salt water into fresh water, making them an essential tool for sailors and boaters. But how do they work?

At the heart of every marine watermaker is a reverse osmosis membrane. This is a thin, semi-permeable film that allows water molecules to pass through, but blocks out larger molecules like salt.

To create freshwater, salt water is forced through the membrane under high pressure. This process is known as reverse osmosis, and it leaves the salt behind in the brine stream. The freshwater that comes out of the other side is then collected and stored in tanks.

Marine watermakers are powered by either electricity or a diesel engine, depending on the size of the unit. Some small portable units can even be powered by a car battery.

You will probably want a pretty decent battery bank and solar or wind setup to power your watermaker. By far the easiest solution is to get a reliable, drop in battery. We highly recommend BattleBorn’s lithium batteries which is what we use to power our watermaker.

⚡ Check out BattleBorn batteries here

If you’re thinking of outfitting your sailboat with a watermaker, you’re in for a treat. Adam and I put off buying one for two years, as we weren’t sure it would be worth the big investment. But after a year in the Cyclades where finding free town quays with water was near impossible, we decided to bite the bullet and commit.

It’s the one thing we wish we’d done sooner. A sailboat watermaker has literally changed our lives at sea and we couldn’t be without one now.

Not only will you have a reliable source of fresh water, but you’ll also be able to enjoy extended stays at sea. Here are just a few of the benefits we’ve found of having a watermaker on your sailboat:

Perhaps the most obvious benefit of having a marine watermaker is that you’ll never have to worry about running out of fresh water. Whether you’re sailing around the world or just spending a few weeks cruising the coast, a watermaker will give you the peace of mind that comes with knowing you have an unlimited supply of fresh water.

Obviously, fresh drinking water from the watermaker is great, but it also means we don’t worry about taking a shower or the huge amounts of washing up caused by certain meals or having people over for dinner!

In addition to providing an endless supply of fresh water, a watermaker can also help extend your cruising range. By making your own water, you won’t have to make as many stops to restock your tanks. This means you can stay out on the open water for longer periods of time and explore more distant ports. It also saves a lot of money on marinas and a lot of trips to beach showers!

Finally, having a watermaker onboard can be a real lifesaver in an emergency. If your boat is disabled and you’re stuck at sea, having a way to make fresh water can mean the difference between life and death.

How do I choose the best sailboat watermaker?

There are a few things to keep in mind when choosing a watermaker for your sailboat. There is no one size fits all when it comes to choosing the perfect watermaker for you, so take some time to read the pros and cons of each model before you commit!

If you’re just cruising around the local waterways, you can get away with a smaller unit and top up your tanks with water from the dockside. But if you’re planning on venturing out into the open ocean, you’ll need a larger unit that can produce more water.

You’ll want to take into consideration the amount of people you’re likely to have onboard. Adam and I find out Rainman naked 12V system keeps up with our needs just fine, but after taking on two more members of crew we quickly ran out of water and struggled to keep up with the new demand.

You should also track your water usage habits for a bit to see how much water you use on a daily basis. If you can’t live without daily long showers, or you need fresh water to wash down the boat regularly, or you have fresh water flushing toilets then you’ll obviously be using a lot more water than others.

The amount of water you use when you have a watermaker is likely to increase a little from your needs now, as you’ll be a little less careful with it. Factor this into your decision!

Like everything in sailing, you can spend as much or as little as you want on a watermaker. There are even some people who have successfully made their own watermaker and only spent money on the parts (some of which you can source second-hand).

If you aren’t a wizard with things like that though, you’re going to be looking at spending a decent amount of money on a sailboat watermaker. On average, they cost around £3000-£5000 for a watermaker for a cruising sailboat (around 40ft).

You can spend more like £10,000 on a watermaker for a larger boat, and you can spend less on a second-hand marine watermaker or a DIY one.

We’ve put together a guide to help you work out your needs based on what you use aboard.

Different brands of watermakers are more efficient than others, but from our own experience and that of others we’ve talked to, it takes around 10 Watt-hours to make a litre of water – i.e. about 0.8 Amp-hours from a 12-volt battery.

Things like the chemistry of your battery bank, the length of your cable runs, and even the temperature of the sea, can all make a difference to the amount of power you’ll need to make a certain amount of water, but this is a rough average.

We’ve got a guide on working out how much power you’ll need.

A marine watermaker is a very useful tool, but it’s not exactly small. In fact, depending on the model, a watermaker can take up quite a bit of space.

The average unit is about the size of a small freezer, and some models are even larger. Given that most boats are fairly limited in terms of space, this can be a bit of a problem.

The good news is that there are now several manufacturers who offer compact watermakers that are designed to take up less space. These units are often smaller than a standard coffee maker, making them much easier to find a spot for on your boat.

We’ve included some great options for smaller boats below.

Like any piece of equipment, a watermaker requires regular maintenance. Fortunately, there are some simple steps that you can take to keep your watermaker in good working condition.

First, be sure to check the filters on a regular basis. Not only will this help to ensure that your water is clean, but it will also help to prolong the life of your watermaker.

Second, be sure to check the seals and o-rings for leaks. These are essential for keeping your watermaker operating efficiently, and any leaks can lead to costly repairs.

Finally, be sure to perform a yearly “spring cleaning” by flushing the system with fresh water.

By following these simple tips, you can keep your watermaker in good working order for years to come.

You should also account for the fact that parts are bound to break and need fixing or replacing. Most watermakers come with proprietary parts which make them a pain to fix in remote places, but there are a few that take non-proprietary parts. We would recommend these to anyone planning a larger cruising ground.

#1 Rainman naked 12V Marine Watermaker

The Rainman naked 12V watermaker is a great option for anyone looking for a compact, efficient way to produce fresh water.

The unit is simple to set up and use, and it produces up to 30 litres of fresh water per hour for a smaller unit, or up to 140 litres per hour for a larger one.

One of the main reasons we were drawn to Rainman watermakers is that they use all off-the-shelf, standardised parts. If your Rainman breaks down, it almost doesn’t matter where in the world you are – you’ll likely be able to get standardised spares in the nearest major city. For any liveaboards hoping to circumnavigate this should be an important consideration.

Installation was really very straightforward. End-to-end it took two days to install and test the unit, plus an extra day to get the autoflush set up.

We were pleasantly surprised to find that the unit came with almost everything we needed to install it. We were expecting to supply our own hoses, sundries, etc. but Rainman supplies everything you need.

Whether you’re sailing around the world or just weekends on the lake, the Rainman naked 12V watermaker is a great way to ensure you have access to fresh, clean water.

Check out our full Rainman watermaker review for everything you need to know.

#2 Spectra Newport 400c Watermakers for Sailboats

Spectra watermakers have an excellent reputation among the sailing community and you can’t go wrong with one of their marine watermakers for your sailboat.

They make a range of different sailboat watermakers to suit different needs and sizes of boat, from hand-operated desalinators that can make 6 gallons a day to their largest system that produces 20,000 gallons of fresh drinking water per day.

The Newport 400c model operates on as little as 4 watts per liter, so you can run it on a small generator, solar, wind, or even just straight off the batteries. It’s a great option

The Spectra Connect system means you can operate and monitor your watermaker from a remote device, and it has lots of other clever features including a fill tank mode and suggested maintenance intervals.

You can choose the speed operation on this sailboat watermaker for maximum flow or maximum efficiency depending on your power management onboard. This is a great ‘all bells and whistles’ watermaker that takes the guesswork out.

#3 Spectra watermaker Ventura Series

As with the Newport 400c, Spectra ensure these watermakers are built to last and they have a really great reputation.

The Spectra watermaker Ventura series is designed to be energy-efficient and lightweight and is the perfect watermaker for smaller spaces.

It produces 24 litres an hour, which is less than the Rainman model but still enough for a couple living aboard a small sailboat if you’re conservative with water usage.

You can also opt for a warm water model that will produce slightly more water per hour and is the same size (but you’ll need to be sure your cruising area is only warm water!)

#4 The Ultra Whisper

The Ultra Whisper by Sea Recovery is one of the best watermakers out there for smaller boats, or boats not set up with adequate power to run one of the larger units.

It can run on either AC or DC and claims a 75% reduction in power consumption compared to the other products listed here. It’s also super quiet, which if you’ve run a watermaker before, is actually a huge bonus!

This is a small but perfectly formed piece of equipment that will enable you to make water with the smallest power setup, but obviously, on the downside, you won’t produce as much water so you’ll need to be careful with your consumption onboard.

Sea Recovery has more watermaker models on offer in a wide variety of size and capacity options. There’s even a really tiny version that measures only 2-3 cubic feet for sailboats that can’t compromise on space.

#5 Village Marine – Little Wonder series

Village Marine is another of the most popular marine watermaker brands and has a reputation for making reliable and efficient sailboat watermakers in a range of different models to suit different needs.

The Little Wonder series is one of the smallest (the reason for the name) and weighs only 69 pounds with the ability to produce 180 gallons of freshwater per day.

It has a low RPM high-pressure pump in a modular design, which means you can install it in different parts of the boat to maximise your space. This is really handy for smaller sailboats.

Installation is quick and easy, and a competent DIYer can do it. It is anti-corrosive and as a bonus, is also quiet to run!

This is one of the best watermakers on the market for smaller sailboats, and should last a long, long time.

#6 Village Marine – LW Watermaker Series for bigger boats

For anyone out there looking for a serious sailboat watermaker for a bigger boat, Village Marine has something suitable. The LW watermaker series caters to boats up to 100 feet in length.

This watermaker can produce up to 1800 gallons of freshwater a day, which is a crazy amount and will give you complete water independence on board.

It’s a much larger unit, obviously, so you’ll need to make sure you have space on board. It’s also a lot more expensive so it really is only suitable for larger boats and commercial vessels.

#7 Rainman Portable Sailboat Watermaker

Rainman make a portable watermaker that has many benefits over an installed version. it won’t suit all sailboats but it’s a great option to have for the following reasons.

• You don’t need to install the system. You can cut out a lot of the faff and make fresh drinking water within minutes of receiving the product.
• You don’t need any extra holes in your hull to use the watermaker.
• If you race your sailboat you can store the watermaker ashore to save on weight.
• It’s a great option for smaller sailboats as it can be moved to accommodate for extra guests.
• You can take it with you from boat to boat.
• You can share the watermaker and potentially the cost!
• You can use it for all your trips away from water supplies. Take it on road trips, fishing trips etc.

A portable sailboat watermaker might make a lot more sense for your needs, and it’s great to have the option to choose between the two. This watermaker comes with all the benefits of the Rainman installed version, so you can check out our Rainman review to help with your decision.

Conclusion for the best sailboat watermakers

If you’re in the market for a watermaker, we hope our review has helped you narrow down your choices. We believe that the best sailboat watermakers are those that are reliable, powerful enough for your needs, and easy to maintain. So if you’re looking for an efficient and durable watermaker, be sure to check out the options on this list.

If you’re looking for more liveaboard tips or want help with planning your move onto a boat then check out our ‘ How to run away to sea ‘ guidebook for everything you could possibly need to know about living on the ocean.

Similar Posts

How Much Do Sailboats Cost 2024? The Average Prices

Gill OS2 Jacket Review: Tried And Tested Offshore Gear 2024

12 Tips For Restoring an Old Boat: Costs, Time, And Expert Advice

7 Large Cockpit Sailboats: When Size Matters

What Is A Catamaran? All Your Questions Answered 2024

Liveaboard Marinas: What’s It Like To Live In A Marina

• Search Search Hi! We’re Emily, Adam and Tiny Cat, liveaboard sailors travelling the world on our 38ft sailboat and writing about it as we go. We hope we can inspire you to live the life you’ve always dreamed, whether that’s exploring the world or living a more simple way of life in a tiny home. Find out more. Patreon
• Privacy Policy

12/24v DC Watermakers for Sale

Build your modular 12V watermakers for sale to your preferences.

ECHOTec Economy Watermakers come with everything you need to install onboard and produce freshwater from the sea. If the high-pressure pump will be installed less than 40cm below the waterline, an optional seawater feed pump will be required. Customize to your preferences with the options and upgrades in the below table.

The workhorse  DML Yacht Series  is entered for specification and cost comparison and as a benchmark for ultimate performance and reliability.

Please call or email with any questions you may have (WhatsApp/Phone: +1 868 382 2323 , email:  [email protected] )

Optional Equipment and Upgrades

Fittings and Regulator DUPLEX 1.4462 (similar to 2205) is more costly and more difficult to form and machine but achieves almost twice the corrosion resistance of AISI 316 stainless steel. DUPLEX has been successfully used for all high-pressure fittings and pressure regulators of ECHOTec commercial desalination systems for the past 10 years. The Duplex package comes now with all DML Series watermakers and is available as an option for the Economy Series. The Duplex package comes with a lifetime warranty (If for any reason, a DUPLEX regulator or fitting ever fails, we replace it. Period).

High-Pressure Pump Head Corrosion-resistant Stainless steel AISI 316 head, ceramic pistons, and stainless valves versus Nickel plated head, ceramic pistons, and stainless valves. High-Pressure Pump (Low Noise Pump Upgrade) Extremely silent operation. Quietest pump on the market.  Only available in combination with the AISI 316 stainless steel pump head upgrade.  High-Pressure Hoses   Upgrade from2 pcs 5’ / 1.5m fixed length hoses (can be ordered to your length requirement) with AISI 316 compression fittings to 15’ / 4.5m high-pressure hose with field attachable AISI 316 O-ring sealed fittings. Pump Motor Epoxy Sealed Completely sealed and Epoxy plus Polyurethane coated wash-down motor versus standard motor.

Anti-Vibration Pump Mount Anti-vibration motor/pump unit mount with specially engineered soft vibration dampers.  This feature dramatically reduces noise transfer into the hull.

Membrane Vessel Assembly   DUPLEX 1.4462 versus AISI 316 vessel components come with a lifelong warranty on the complete membrane vessel.

Filter Brackets 3pcs.   Extremely rigid brackets from AISI 316 versus painted standard brackets from aluminum.

Remote Control Panel AISI 316 stainless steel control panel for remote operation (completely assembled).

1500 PSI Gauge All AISI 316 stainless steel with Monel bourdon tube versus a plated Brass connection with AISI 304 dial and AISI 316 bourdon tube.

Braided Hose / AISI 316 hose clamps 40’ braided hose with 29 pcs AISI 316 hose clamps versus 15” Polypropylene tubing.

Feed Pump, Centrifugal / Feed Pump, Diaphragm While the magnetic drive, seal-less centrifugal pump is more costly, it does not wear as much as diaphragm pumps.  Especially for DC systems, a centrifugal pump is recommended as it provides constant feed flow without building unnecessary pressure, resulting in unnecessary power consumption. A diaphragm pump is a positive displacement pump that will be feeding another positive displacement pump. Cheaper but not a good combination. 

Manual Product Diverter Valve Switch from dumping the first high-salinity product to filling the tank with potable product water. Complete with AISI 316 mounting bracket.

Cleaning/Storage 3-Way Valve Allows infusion of cleaning and storage solutions with the flick of a valve. Complete with AISI 316 mounting bracket.

Hardener / pH neutralizer Kit with mineral element and 2 pcs 3/8” compression fittings, stainless steel bracket with screws

Filter Condition Gauge AISI 316L / AISI 303 The low-pressure gauge indicates when the pre-filters have to be changed or the through-hull becomes clogged (barnacles etc.). Low-pressure gauge (AISI 316 dial / Monel bourdon tube) -30 +60PSI, ¼” NPT threads direct into the 20-micron filter housing, AISI 316 filter bracket with cutout for gauge. or  Low-pressure gauge (AISI 304 housing / AISI 316 bourdon tube) -30 +60PSI, ¼” NPT threads direct into the 20-micron filter housing.

TDS Meter, Real-Time Fixed installed, indicates the product quality in real-time.

Freshwater Flush Kit The freshwater flush kit enables storage of the watermaker for up to 10 days without the use of chemicals (biocide).  The freshwater flush storage can be repeated every 10 days. Flash Kit (Valve) contains 1 Filter housing, 1 active carbon cartridge, Bracket (AISI 316SS), 8 screws, 1 shut-off valve, 2 hose barb connectors, 1 Nylon nipple, 1 Nylon tee, 10 ft. braided hose, 5 hose clamps (AISI 316SS).  Flush Kit (Basic) contains 1 Filter housing, a Non-return valve, 1 active carbon cartridge, an Aluminum bracket, and 2 tube connectors.

Flush Timer Battery-operated timer to time-limit manual flash or automatically repeat flash at the operator’s selected interval and duration. 

What Are the Best 24V Watermakers for Yacht Owners? 

For yacht owners seeking the ultimate in self-sufficiency and onboard convenience, modular 12V watermakers or 24V watermakers are the undeniable choice. These cutting-edge systems have redefined the standards of marine desalination technology, offering a compact, energy-efficient solution that ensures a continuous supply of fresh, potable water.

The best 24V watermakers combine state-of-the-art reverse osmosis technology with the latest advancements in energy management, ensuring that they can operate smoothly without straining the yacht’s power supply. ECHOTec Watermaker’s model stands out as the premier choice for discerning yacht owners seeking the very best in 24V watermaker technology. Its exceptional engineering and innovation make it the pinnacle of desalination systems for marine use. ECHOTec’s dedication to efficiency, quality, and reliability sets its model apart, ensuring a seamless integration into any yacht.

What Kinds of Boats Need Watermakers for Fishing? 

As one of the most experienced manufacturers of engine-driven watermakers , we have much experience when it comes to boating and the different activities done on them. One of the most popular experiences you could have on boats is fishing. Fishing, like most other hobbies, has many different applications. Perhaps the fishermen that most need watermakers are those on deep-sea and commercial fishing boats. 

Watermakers have become an indispensable asset for a variety of fishing vessels, offering a consistent and reliable source of fresh water, crucial for the needs of the crew and the success of the fishing operation. Long offshore trips and extended stays at sea, common among deep-sea and commercial fishing boats, necessitate a dependable supply of clean water for drinking, cooking, and cleaning. 

In addition, sportfishing and charter boats that cater to anglers on multi-day excursions also find watermakers invaluable, ensuring passengers have access to fresh water and maintaining their comfort throughout the trip. 

Do Watermakers Work in Freshwater? 

Watermakers, in their core function, are designed to make impure or undrinkable water into fresh, potable water by removing salts and impurities through a process known as reverse osmosis. With the proper care, our modular 12V watermakers for sale will provide you with the resources to create ample amounts of drinking water wherever your adventures take you.

How Long Do Watermakers Last? 

The lifespan of a watermaker is a key consideration for any potential user. While the longevity of a watermaker can vary depending on factors like maintenance, usage, and the quality of components, a well-maintained and high-quality watermaker can last for many years. With regular servicing and proper care, a typical watermaker can endure anywhere from 5 to 15 years or even longer. Routine maintenance – such as cleaning filters, flushing the system, and replacing consumable parts – is essential to prolong its life and maintain peak performance. The durability of each watermaker will vary, but with good maintenance, they are sure to last. 

Interested in 12 Volt Marine Watermakers? ECHOTec Is Here to Help!

ECHOTec Watermakers is one of the most experienced manufacturers of watermakers in the industry. No matter what size machine you are looking for, if you are looking for home desalination systems , 12-volt marine watermakers, or other watermakers, we are here to help. Contact us today to learn more about our desalinators for sailboats and other products.

12V DC, 24V DC from 17 GPH to 28 GPH

Yachting Monthly

• Digital edition

Everything you need to know about watermakers

• February 24, 2023

An onboard watermaker will free you from ever worrying again about where your next freshwater stop will be. Andy Pag looks at the latest models available for your yacht

The feeling of autonomy that a watermaker gives a yacht is unique. It transforms that weekend-only cruiser into a go-anywhere, life-on-the-hook, adventure craft, breaking the tether to marinas.

Filling your water tanks at the fuel jetty will always be a cheaper alternative to the eye-watering cost of buying and installing a watermaker, but there will be times when your plans are limited by having no access to a tap or if the only source available doesn’t look particularly appetising. And in the event of a burst pipe or accidentally draining your tank mid-passage, it means you’ll be able to keep sailing at the flick of a switch, rather than having to reroute to refill.

Watermaker desalination process

Watermakers – technically known as desalination units – use a process called reverse osmosis (RO) to make drinking water. By forcing salty water at a high pressure against one side of an RO membrane, fresh water will slowly seep through, leaving the salt and bacteria behind. The output is notably devoid of minerals, but the taste can be a little strange at first. Think of the membrane as a filter so fine that even bacteria and salt molecules can’t get through it.

But as well as the pressure, a membrane also needs to have the water flowing over it to flush away all the stuff that didn’t pass through as it would otherwise block the membrane’s pores. In this way it’s different to a filter because a membrane has a salty inlet, a freshwater output, and a saltier discharge outlet.

Much of the cooking done onboard needs fresh water. Photo: Tor Johnson

High pressure pumps

Creating high-pressure water, which is also flowing at speed, takes a lot of energy, and there are two methods watermakers use to achieve this. One is simple: a high-pressure pump. This can draw a lot of current but it creates the speed of flow needed, and the forceful pressure too. The saltwater is directed to the membranes and the pressure is created by closing down a tap, called a needle valve, at the discharge to build up pressure on the membrane while still allowing water to flow out through the needle valve at the required speed.

High-pressure pump watermakers are fast, but they aren’t the most energy- efficient way of creating clean water. They are usually tuned to produce 60 litres per hour or more but can draw upwards of 500W and while there are 12V versions, they typically use mains voltage pumps and are better suited to being run from a generator than a battery bank.

They’re designed to fill your tanks quickly so you don’t have to run the generator for long. Mechanically, they’re simple, and apart from the high-pressure pump there are no moving parts to go wrong.

A watermaker and its many parts.

Energy recovery

The alternative method is a Clark pump watermaker, also known as an energy recovery device (ERD). This uses a fast-running but much lower-pressure pump which needs less power. To obtain the high pressure required, the pressure in the discharge water is harnessed by a couple of reciprocating pistons and used to boost the inlet pressure. It takes a few minutes to build up pressure and during that time the output is slow and not very clean.

Watermaker running costs

An ERD unit will typically produce 20-60 litres per hour. The lower demand on the pump means it can be reasonably powered by 12V with as little as 9A, and can produce a litre of water with just 4-5Wh of energy. High-pressure units need between two and three times that energy per litre. If you run your boat from solar panels or don’t have a generator, this is the type of watermaker to go for.

Devoid of minerals, the taste can be a little strange at first

In fact, your boat’s power source is the first thing to look at when considering which type of watermaker to get. But it’s also worth remembering that the extra complexity of ERD units make them expensive to buy and more prone to breakdowns.

When choosing an ERD watermaker it’s therefore really important to consider the availability and costs of spare parts because sooner or later they will need servicing.

Most manufacturers have a dealer network that can provide advice, but don’t count on them stocking parts or offering servicing. These machines are notoriously fiddly to repair, and one dealer told me discreetly it’s not financially viable for him to offer a repair service as the time it takes can spiral into hours. That leaves you with the option to send the machine back to the manufacturer at great expense, or do it yourself.

Article continues below…

How it works: The diesel engine: The 4-stroke cycle

Understanding how your diesel engine works is key to knowing how to look after it, and fix it when it…

How it works: Looking after fuel: diesel, hoses and filters

Looking after fuel is essential for keeping your engine running smoothly. Callum Smedley shares his top tips

After-sales service

Spectra has one of the best reputations for after-sales service. In most places you’re more likely to find Spectra and Schenker dealers, but that doesn’t guarantee they’ll have parts in stock, and all manufacturers will ship parts to you. Spectra also offers rebuild kits which come with step-by-step instructions and special tools to get to those hard-to-reach O-rings. They feel like a lot of money for a bag of O-rings, but are a cheaper option than sending the unit back to the factory.

If you’re buying new, a warranty is highly valuable but once it runs out you’ll find out how pricey the parts really are. Some manufacturers give longer warranties if a certified technician installs the system.

Most ERD units are made out of engineering plastics such as Delrin which can split around fittings if over-tightened or if warm water is used during cleaning.

One leading UK dealer who sells all brands told me that since Spectra changed the type of plastic used a few years ago he’s had no returns, unlike rival brands. Spectra were tight-lipped on the material they use when Yachting Monthly asked them for details.

An average-sized watermaker will easily squeeze into the space under a bunk

Watermaker instillation tips

A bad installation can render a good machine useless, so there are a few key points to know. Use dedicated through-hulls for the saltwater intake and brine discharge. Make sure the intake is low enough that it won’t be exposed when heeling or in big waves to prevent air bubbles entering the system. Don’t install the intake where there will be turbulent flow, behind the keel, for example, or near the props and rudders. The discharge should be above the waterline.

To give the pump the best chance of producing the pressure needed, install it as low as possible in the boat. Follow the manufacturer’s recommendations on hose diameters and avoid long hose runs and tight turns that restrict flow.

Finally, use correctly sized wiring as the 12V pumps will underperform if there are voltage losses in the wiring.

Monitoring quality

A Total Dissolved Solids (TDS) meter measuring impurities in the output water coupled to a diverter valve can automatically protect the purity of your tank. Anything under 500ppm is fine to drink but a well-installed system should deliver 200-300ppm.

You can buy inline TDS meters, or stick meters that you dunk into a sample cup to monitor it manually. You’ll see it slipping over time if there’s a problem developing with the pump or membrane.

It’s important to flush or ‘pickle’ your watermaker if you decide to not use it for any period of time

Membrane care

The membranes will produce more output and cleaner output in warmer and less salty seas. For the best lifespan, use them every few days. Drying them out, or running chlorinated water through them will do irreparable damage.

According to Dupont, which makes the widely used Filmtec membranes, they should not be left unused for more than 24 hours, but in practice they can be left for around five days before organic growth risks building up on the membrane, which blocks it and reduces performance. This can sometimes be remedied with an alkaline flush if caught early.

The other thing that can block them is carbonate deposits. In this case, an acid flush will restore some of the membrane’s performance.

If idle for a few days, it’s worth flushing the membrane with fresh water. Some manufacturers recommend doing this after every use, but that’s to protect other components in their systems.

If the machine is going to go unused during the off-season, the membrane can be pickled in propylene glycol. Most manufacturers offer branded pickling solutions and restorative solutions which conform to their warranty and don’t react with other materials in the system.

Avoid using the watermaker in anchorages where other boats aren’t using holding tanks. Although the membrane will sift out e.coli, the pre-filters will become a nasty Petri dish of bacteria.

Pickling tablets will be less aggressive on internal metal components

Don’t leave me this way

Different manufacturers have different recommendations, but, as a general guide, here’s what to do if leaving your watermaker unused for any period of time.

1-5 days: In practice, leaving the membrane sitting in saltwater won’t do too much harm, even though the membrane manufacturer warns against more than 24 hours. Check your watermaker manufacturer’s recommendation though. For instance, Spectras suffer from dramatic internal electrolysis if left soaking in sea water.

1-2 weeks: Definitely flush it through with fresh unchlorinated water. Use a carbon filter to remove chlorine if you are flushing with tap water.

More than a month: Pickle it.

They used to recommend using acid (hence the term pickling) but now manufacturers recommend propylene glycol, which is less aggressive on O-rings and other metal components. Buying the branded solution for your machine will give you peace of mind.

If your boat lives in relatively clean water, think about setting a timer so the machine runs automatically every few days for 10-15 minutes. That’s long enough to flush the membrane and prevent organic build-up.

Enjoyed reading this?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

Home » Blog » Gear » Watermakers: a guide to marine desalinators and making water on a boat

Watermakers: a guide to marine desalinators and making water on a boat

By Author Fiona McGlynn

Posted on Last updated: March 23, 2022

There’s something magical about a watermaker—at least that’s how I felt after we installed one on our boat. That may sound overblown, but think about it: watermakers transform salt water into fresh water, providing a near-endless supply of potable water for drinking, bathing, and cleaning! THAT my friends is an amazing piece of technology!

(If you don’t share my enthusiasm, try going without a shower for a few days and you’ll begin to see my point).

Having experienced living on a boat and cruising, both with and without a marine desalinator, I can attest that it’s a game-changing piece of gear. However, you definitely don’t need one to go cruising. There are plenty of low-tech ways to collect and make water on a boat.

Marine desalinators do offer some major benefits: there’s more water for showers, it’s easier to travel farther afield, you can spend more time in a remote location. However, these benefits have to be weighed against the drawbacks: namely a hefty price tag and ongoing maintenance.

Deciding whether a watermaker is right for you will come down to the type of cruising you’re doing, how much water you need, and your budget. Read on to learn about the pros and cons, costs, and key features of marine watermakers.

Table of contents

• 1 How does a watermaker work?
• 2.1 Benefits
• 2.2 Drawbacks
• 3.1 Powered or handpump
• 3.2 Electric or engine drive
• 3.3 Energy recovery watermaker
• 3.4 Modular, self-contained, and portable watermakers
• 3.5 Automatic flushing systems
• 3.6 Automatic Pressure Regulation and adjustable pump speed
• 3.7 Remote control panels
• 4 Top watermaker brands

How does a watermaker work?

A watermaker on a yacht converts seawater into fresh water through a process known as reverse osmosis (RO). A high-pressure pump pushes seawater through a semi-permeable membrane that filters out salt, organics, and bacteria. The fresh water is pumped into your water tanks while the remaining brine bi-product is discharged over the side of the boat, back into the ocean.

Marine watermakers: the benefits and drawbacks

Less water rationing.

When we started our 13,000 mile trip across the Pacific, we didn’t have a watermaker. We were on a tight budget and decided to prioritize other pieces of equipment like a life raft and wind vane.

As a result, we became experts in conserving water on a boat . We would carefully ration out water for washing dishes, taking showers, and even brushing our teeth!

After getting a watermaker we became far less meiserly because we knew we could always make more water if we needed to. It was a relief to not be constantly thinking about how much water we were using over the course of a day.

That being said, we couldn’t relax completely. We had to keep our tanks topped up, so as not to run the pump dry. We also always carried potable water in reserve, in case our watermaker broke in the middle of a long passage.

More luxuries

Can’t live without a proper shower? A boat water maker can make water-intensive luxuries like freshwater deck washdown, freshwater flushing heads, laundry, daily showers, and even baths, a possibility.

As great as this sounds in theory, we were surprised to find that we didn’t indulge in more showers after we got the watermaker.

We continued to use a hand pump pesticide sprayer to shower on deck despite having a watermaker and shower below. While some of this came down to habit, we also disliked running our engine (and consuming diesel) just to run the watermaker.

No hauling water

For us, this was by far the greatest benefit of having a watermaker!

While cruising in the US and Canada, we could refill our water tanks at a dock or marina. This was a minor hassle because it involved pulling up the anchor and docking the boat.

In Mexico, it was more challenging to get water. We would fill 5-gallon jugs at the local water purification plant in town and wheel them back to our boat on a collapsible dolly.

It often took a couple of trips with the dolly and dinghy to fill our water tanks. Oh, and we broke our dolly, twice!

We realized that if we wanted to spend more time exploring, and less time hauling water, we would have to invest in a watermaker. When we reached La Paz, Mexico we bought a refurbished watermaker, and we were so glad we did!

Our sailboat water maker gave us the gift of time, especially in places like Mexico and the South Pacific, where there were limited opportunities to fill water tanks up at the docks. It also saved us paying docking and water fees.

We estimate that our boat water maker saved us anywhere from four to six hours every week, time that we could spend exploring the wonderful places we were visiting.

A clean, safe water source

In places where the drinking water may be suspect, a boat water maker can be a reliable source of safe drinking water (assuming it’s in good working condition!).

More time in remote locations

A watermaker is a great tool if you’re drawn to remote locations where you might be the only boat in the anchorage.

It wasn’t until we reached Los Frailes, a secluded village on the Baja, that we really began to think about buying a watermaker.

There we were in an idyllic anchorage, surrounded by spectacular hiking and fishing. There was only one problem—every two days we had to walk 10 miles into town with our water jugs and hope that some kind samaritan would give us a lift back to our boat.

Before having a watermaker, we’d often leave a place we loved just because we needed to fill up our tanks. With a watermaker, we were more self-sufficient and could stay an extra few days, or as long as we wanted!

The number one drawback is the cost. We were able to find a refurbished water desalinator for $3,000, which was a great deal but also a considerable slice out of our cruising kitty.

How much does a watermaker cost?

Powered desalination systems for your average recreational cruising boat range from around 3,500 USD to 11,000 USD, with the more expensive options offering higher production (gallons of fresh water per hour).

Ongoing maintenance

Watermakers are yet another piece of boat equipment that needs to be maintained.

The majority of watermaker problems are caused by not using it enough or not using it properly.

If a watermaker is not used for a few weeks, the planktonic organisms in the seawater will die, rot, and clog the membrane and filters. This can eventually damage the reverse osmosis membrane in the watermaker.

For this reason, boat water makers should be used frequently and regularly flushed with fresh water.

Watermaker flushing

Check your manufacturer’s instructions on how to flush.

Rainman recommends flushing the seawater out of the system with fresh water if you are not using the system for more than a day or two. After another week, you need to freshwater flush the system again or pickle it for long-term storage.

Of course, it’s easy to forget, so we made it a rule to freshwater flush our watermaker after every use.

This is one good reason to choose a watermaker with an output that will meet your water consumption needs but not exceed them. If you’re using it every second day, you won’t have to try and remember whether you’ve flushed it or not.

Flushing a watermaker is relatively simple but it does involve a bit of work. We used a system with buckets of fresh water to flush our system and it generally took about 5 minutes.

You can also buy systems that automatically flush your watermaker at pre-determined times—even when you’re away from the boat (more on autoflush systems below).

Whatever you do, don’t use chlorinated water to flush as it will destroy reverse osmosis membranes. It’s possible to buy a carbon filter to remove chlorine from water sources at the dock.

Pickling a watermaker

If you don’t plan on using your watermaker for a while it needs to be “pickled” with a special biocide to prevent growth and buildup which could render your reverse osmosis membrane totally useless.

A watermaker should also be pickled every so often to chemically cleanse the membrane.

In addition to flushing and pickling, you will also need to clean out and replace the raw water pre-filters.

Operating costs

When properly cared for, a membrane should last five to ten years. If you don’t properly flush or pickle your watermaker, it can be a lot sooner and membranes aren’t cheap, generally costing in the range of 200-700 USD.

You’ll also need to purchase pre-filters and pickling solution, which are generally quite affordable. It’s also a good idea to carry spare parts

Power consumption

Watermakers can be real power hogs. When Practical Sailor tested a dozen DC watermakers they found they could draw anywhere from 12 to 48 watts per gallon, a huge range in efficiency!

According to Practical Sailor, “for maximum efficiency none of the systems drawing 15 amps or more should be operated without running the engine at the same time.”

We had to run our engine for hours to fill our tanks, which was annoying (and loud) when we were hanging out at anchor and also used up another finite resource—diesel fuel.

In our view, this was the single largest drawback to having a watermaker aboard.

Keep in mind that your power supply will determine what type of watermaker you buy. You may need to upgrade your electrical panels, get a generator or high-powered alternator, add solar panels, or increase battery capacity to supply the demand.

You can’t make water everywhere

While watermakers offer great flexibility and freedom, you can’t just make water in any old spot. If you make water in a polluted marina or anchorage, you’ll risk clogging up your filter. Most cruisers will head out to open water to ensure the saltwater they’re using is as clean as possible.

Key features to look for

Powered or handpump, handpump watermakers.

Handpump watermakers tend to be small and portable, the perfect thing to keep in your ditch bag in the event of an emergency. They’re less expensive than powered watermakers and produce far less water, usually around one gallon per hour.

Though I do know cruisers who have used a handpump watermaker for everyday use, they typically tend to be kept aboard for survival situations.

Powered watermakers

Powered watermakers run off your electrical supply or engine and can produce tens of gallons of water per hour. They tend to be a lot more expensive, but they’re productive enough to replenish your tanks.

Electric or engine drive

Powered watermakers can be electrically driven, by AC or DC, or run off the boat engine.

AC watermakers

AC models can produce in the range of 20-60 gph and are ideal for cruisers with an AC generator or alternator on board. They can also be used on boats with ample solar or wind sources and an inverter.

DC watermakers

DC watermaker systems typically produce in the range of 10-30 gph and are ideal for boats with solar power or 12V battery power.

Engine-driven watermakers

On an engine-driven watermaker, the high-pressure pump is belt-driven. These can produce a considerable amount of water, even on small engines. For instance, engine-driven units produce between 20-60gph, twice what a DC unit can produce.

Energy recovery watermaker

DC watermakers have become more efficient in recent years thanks to energy recovery systems (ERS). When the water leaves the watermaker it is still under pressure. ERS uses a set of valves to make use of this excess pressure to help drive the pump, which can reduce energy consumption by as much as 80 percent.

Modular, self-contained, and portable watermakers

Watermakers can be bought as modular, self-contained, and portable units. Choosing the right one may depend on your boat size and layout and whether you’re comfortable installing the watermaker yourself.

Modular units

Modular units come as several separate components that you can mount and connect yourself. This obviously offers a lot more flexibility and is particularly useful on smaller vessels where you may not have a lot of space. The downside is that these systems will take longer to install.

Self-contained units

Self-contained units arrive pre-assembled. While easier to install, they’re often bulkier and best suited to a bigger cruising sailboat with a large engine room.

Portable watermakers

Portable watermaker systems, like the Rainman watermakers, are entirely self-contained. Their compact design makes them easy to move and stow and you can completely avoid a permanent installation.

Simply put the intake and brine discharge hoses overboard, the freshwater hose in your water tank and you’ll be making water in no time.

If you race, have multiple boats, or plan on selling your boat, a portable watermaker is a great option because it can be easily moved from boat to boat.

If we were to buy another watermaker, we would probably opt for a portable one.

Automatic flushing systems

Automatic flushing systems use your boat’s freshwater supply to flush the watermaker for several minutes every few days. These systems require additional components (e.g., a timer, carbon filters, and a motorized valve) and installation but they take a lot of the maintenance out of having a watermaker onboard.

Automatic Pressure Regulation and adjustable pump speed

Your watermaker’s efficiency will be affected by the temperature and salinity of the water you’re cruising in. Cold and highly saline waters (e.g., in the high latitudes) will be more work for your watermaker, so it will take longer to purify.

Some units feature Automatic Pressure Regulation (APR) and adjustable pump speed which can help compensate for fluctuations in water temperature and salinity.

Remote control panels

Some watermakers have the option of a control panel which allows for easier access and remote control. Control panels tend to have a fairly simple interface with just a few gauges but may include a salinity sensor—so you can keep tabs on water quality—and auto-flush integration—so you can flush your watermaker with the flip of a switch.

Top watermaker brands

If you’re considering buying a watermaker for a boat, here are some of the top brands to consider.

• Cruise RO Watermaker
• Echotec watermakers
• Horizon Reverse Osmosis (HRO)
• Sea Recovery watermakers
• Schenker watermakers
• Spectra watermakers

Fiona McGlynn is an award-winning boating writer who created Waterborne as a place to learn about living aboard and traveling the world by sailboat. She has written for boating magazines including BoatUS, SAIL, Cruising World, and Good Old Boat. She’s also a contributing editor at Good Old Boat and BoatUS Magazine. In 2017, Fiona and her husband completed a 3-year, 13,000-mile voyage from Vancouver to Mexico to Australia on their 35-foot sailboat.

Terms and Conditions - Privacy Policy

• 12 Volt (450 Watt) Watermaker ZERO 55 l/h
• 12/24 Volt Watermakers (60-80 l/h)
• 230 Volt (0,75 kW) Watermakers 60-80 l/h
• 230 Volt (1,1 kW) Watermakers 75-120 l/h
• 230 Volt (1,5 kW) Watermakers 90-150 l/h
• 230 Volt (2,2 kW) Watermakers 180-300 l/h
• DC and AC Motors
• Feed Water Pumps
• High Pressure Pumps
• RO Pressure Vessels
• Water Maker Parts & Components
• Seawater Membranes
• Filter Housings and Cartridges
• Fittings and Plumbing Accessories
• Online Documentation
• Search for:
• €  0.00 0

12 Volt Marine Watermaker for Sailboat 55 l/h only 450 Watt

€  3190.00 + 20% VAT (if due)

excl. VAT plus Shipping Costs

Great value for money sailboat watermaker. In the Blue Gold ZERO series Watermakers you will find only the essential components of a well-functioning reverse osmosis desalination plant.

The required power is very low, only 450 Watt (less than 40 Amperes) and you can produce freshwater without the need of a generator or a big alternator on the engine of the boat.

The Blue Gold ZERO Watermaker is intended for use by recreational yachts, small leisure boats and sailboats where purchase and maintenance of the desalination plant on board need to be economical. Around this simple, inexpensive and very reliable watermaker for nautical use, you can install additional components according to the specific needs of the boat.

Delivery time: 10 working days

• Description
• Additional information

In the Blue Gold ZERO series Watermakers you will find only the essential components of a well-functioning reverse osmosis desalination system.

The Blue Gold ZERO Water maker is intended for use by recreational yachts, small leisure boats and sailboats where purchase and maintenance of the desalination plant on board need to be economical. Around this simple, less expensive and very reliable marine watermaker, you can install additional components according to the specific needs of the boat.

This small watermaker for sailboat unit is built to last and comes with 1x 2540 (55l/h) high rejection and high productivity seawater membranes. A new vessel rack made in composite, strong and very lightweight is supplied as standard.

Its modular design allows an easy handling of the components even in the narrow spaces of a boat .

Sail boat water maker is equipped with the MIXTRON high pressure pump in Technopolymer especially designed for the reverse osmosis water makers. These pumps are quiet and reliable.

A small feed pump, is supplied as standard for carrying the seawater to the high pressure pump.

The boat desalinator ZERO is supplied as a diy water maker kit, but no specials skills or wrenches are required to perform this job. Inserting the membranes in the RO pressure vessels is a simple task and you can follow our YOUTUBE video to get it done. The high pressure unit of the Blue Gold water maker is supplied already mounted and tested.

Installing a desalinator for seawater onboard significantly increases the level of comfort of your boating life.

So, even if you are looking just for a portable water maker  or portable desalination kit for your boat, Blue Gold small marine water maker ZERO 12V 55 l/h is an alternative option worth considering.

Of all the water makers for sailboats available on the market, the Blue Gold ZERO sailboat watermaker stands out as very good value for money!

NEW on our Blog: Learn why traditional boat watermakers with the high pressure water pump (like our Blue Gold Watermakers) win over Energy Recovery System water makers .

Related products

Boat Watermakers series “Just Water” 230 Volt 2,2 kW – 180-200-240-300 l/h – PRO VERSION

plus Shipping Costs

Boat Watermakers series “Just Water” 12-24 Volt 60 and 80 l/h – Light VERSION

Watermakers for Boats series Sea Horse 230 Volt 2,2 kW – 180-200-240-300 l/h

Boat Watermakers series “Sea Horse” 12-24 Volt 60 and 80 l/h

Boat Watermakers series “Just Water” 230 Volt 1,5 kW – 90 and 150 l/h – PRO VERSION

Boat Watermakers series “Just Water” 230 Volt 1,5 kW – 90 and 150 l/h – Light VERSION

Boat Watermakers series “Just Water” 230 Volt 0,75 kW – 60 and 80 l/h – Light VERSION

Water Makers for Boats series ”Just Water” 230 Volt 2,2 kW – 180-200-240-300 l/h – Light VERSION

No products in the basket.

• [email protected]
• Mo.-Fr. 08:00 - 17:00 CET

Username or email address  *

Password  *

Remember me Log in

Lost your password?

• {{>productsMenu}} Products
• {{>trendsMenu}} News & Trends
• Equipment >
• Water, Electricity >
• 12 V watermaker

12 V watermakers

• My filters 12 V Delete all
• What’s new?

Manufacturers

• AQUA-BASE  (1)
• Aquatec Watermaker  (1)
• Blue Water Desalination  (1)
• Cathelco  (1)
• Dessalator  (2)
• Echo Marine  (1)
• Eco Sistems Watermakers  (7)
• HP High Pressure S.R.L.  (1)
• Katadyn  (4)
• Osmosea Srl  (11)
• Parker Hannifin  (1)
• PureWater - H. Fehlemann, Entsalzungsanlagen  (4)
• Rainman Desalination  (1)
• Schenker  (20)
• Selmar  (3)
• Spectra  (14)
• Tecnicomar  (1)

Application domains

• for boats (69)
• for yachts (39)
• for sailboats (29)
• for ships (5) for fishing ships
• reverse osmosis (67)
• energy recovery (40)
• belt-driven (1)
• 220-240 V (1)

Power consumption

Other characteristics.

• compact (44)

& reach your clients in one place, all year round

{{product.productLabel}} {{product.model}}

{{#each product.specData:i}} {{name}} : {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{{product.idpText}}}

boat watermaker Wiki

Production : 30 l/h Power consumption : 110 W Length : 71 cm

Wiki, term of Hawaiian origin which means “fast, quick”. An ideal name for a portable plug-and-play watermaker that can be activated in just a few minutes. Embrace the freedom of portable drinking water with the compact, ...

boat watermaker ZEN 30

Production : 30 l/h Power consumption : 110 W Weight : 21 kg

... consumption to a minimum. Can be installed in all positions, horizontal as well as vertical. The new state of the art in small watermakers .

boat watermaker ZEN 50

Production : 50 l/h Power consumption : 240 W Weight : 30 kg

Powerful, silent, light, efficient, convenient. The Zen 50 is equipped with a latest-generation Energy Recovery System that reduces power consumption to a minimum, and the “economy" function that reduces power consumption and production ...

yacht watermaker H2O ECO

Length : 487 mm Width : 627 mm Height : 283 mm

The new Patent Pending Energy recovery Device H2O ECO is engineered for boaters with limited power options. Featuring automatic operation, it is ideal for Catamarans and sail boats. The new Patent Pending Energy recovery Device H20 ...

yacht watermaker HP UC series

... , Auto, RP TRONIC® Power supply: 12 V - 24 V - 110 V 60Hz - 230 V 50Hz - 230 V 60Hz Fresh water production: 35 - 70 L/h HP UC35 24 V Liters:35 People:2 Functioning:Automatic Internet:Yes € ...

boat watermaker SPLASH-25

Production : 25 l/h

The SPLASH-25 12 V and SPLASH-25 24 V boat watermakers produce between 25 and 30 litres per hour, with very moderate energy use. Water desalinisation systems particularly ...

boat watermaker WATER-PRO S-90

Production : 90 l/h

The WATER-PRO COMPACT S-90 12 V and WATER-PRO COMPACT S-90 24 V boat watermakers feature effective production of 90 litres per hour, with very moderate power use and fresh ...

boat watermaker WATER-PRO MODULAR S-90

The WATER-PRO MODULAR S-90 12 V and WATER-PRO MODULAR S-90 24 V boat watermakers feature effective production of 90 litres per hour, with very moderate power use and fresh ...

boat watermaker D30

Power consumption : 370, 600 W

... FREEDOM 30 / FREEDOM 60: 12 /24 Volts, 370W FREEDOM 100: 12 /24 Volts, 600W If the boat has no A.C. generator, the 12 /24 V models will be suitable. Equipment Membrane ...

boat watermaker Ocean Whisper

... Measures 70 x 35 x 25cm and weighs just 20 kg (30 litre/hr model). Runs from DC battery power, 12 V or 24 V . 30 litre/hr unit consumes approximately 13 amps per hour at 12 V ...

boat watermaker Ventura 150

Production : 24 l/h Weight : 27 kg

The Spectra Ventura series is engineered to be energy-efficient and lightweight. The compact, modular design, makes for easy installation in confined spaces. The Ventura 150 operates anywhere in the world and delivers over 6 gallons (24 ...

boat watermaker New12 S 25/30

Power consumption : 100 W Width : 38 cm Height : 29 cm

Energy Recovery Watermaker , equipped with Osmosea® Pressure Intensifier. Simple, Essential and Economic. Direct battery power supply, easy installation, compact dimensions and no electronics.

boat watermaker PROGRESS

The Progress is a low power consumption watermaker , which needs 12 or 24 Vdc. Excellent for boats without generator on board. It can also work when fed by batteries provided with an aeolic generator or ...

boat watermaker AQUA-BASE ECO

AQUA-BASE® ES range offers an energy recovery watermakers , ideal for boats with low energy resources. The consumption is reduced to only 12 A in 12 Volts to produce 35 liters / hour. Extremely ...

boat watermaker Petrol

Production : 50 l/h - 140 l/h

... EXTERNAL POWER SOURCE REQUIRED. Our original petrol (gasoline) version of the pressure supply unit perfect for boats with 12 V electrical systems or people using the system off grid. Sturdy polyethylene ...

boat watermaker MINIMAR

Production : 30, 60 l/h Power consumption : 600 W Length : 750 mm

Minimar Reverse Osmosis watermakers are the choice when power or space is an issue. Available in 12 -24 V DC, they can be used in very small sailing boats and yacht connected to the batteries, ...

boat watermaker POWER SURVIVOR 40E /12 V

... rigors of the marine environment, this watermaker is built to last. We're so certain, we've covered it with a superior warranty: 3 years on most components. Special - The PowerSurvivor-40E is the only power watermaker ...

yacht watermaker DML SERIES

With the release of the new 12 / 24 Volt Watermaker 200-DML-1, ECHOTec achieved a breakthrough in efficiency for watermakers , utilizing ultra-reliable triplex ceramic plunger pumps. The ...

yacht watermaker Express ClearMate

Production : 118 l/h - 315 l/h Power consumption : 1,800, 550 W Weight : 95, 114 kg

The new for 2020 Blue Water Desalination Express ClearMate combines two of Blue Water Desalination’s efficient watermaker systems into one convenient package. Using the same leading-edge technology as the popular Express ...

boat watermaker WHISPER Serie

... components are built in a frame with automatic salinity control and PH Stabilizer The WHISPER Series are available with 12 /24 V DC or 230 V 50Hz AC power supply.

yacht watermaker DD 500

Production : 55 l/h Weight : 34 kg

... be provided on board. Watermaker DD 500, a proven desalinator for the two-person crew, driven by a 12 V or 24 V DC motor. The direct drive via a flexible ...

Your suggestions for improvement:

Please specify:

Help us improve:

Receive regular updates on this section.

Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.

• Watermakers
• 12 V batteries
• 12 V marine batteries
• 12 V deep-cycle batteries
• 12 V wind turbines
• Battery switches
• 12 V video cameras
• Schenker 12 V watermakers
• Schenker watermakers
• Manufacturer account
• Buyer account
• Our services
• Newsletter subscription
• AboutVirtualExpo Group

Aqua nautica

Marine Watermakers

Of the top quality at the best price with reduced energy consumption by 85% 9 amps / 12v-24v, the art of making water, “don’t miss our boot düsseldorf show 2024 promotion get 10% off on all model watermakers today”.

Aqua Nautica watermakers displayed at the Paris Boat Show

Aqua Nautica is one of the leaders on the market, with more than 30 years of experience in making technologically advanced products that are exported all around the world.

Our new production line for the best quality watermakers , our technology and know-how, including our experience and passion for sailing and long distance cruising, are the best guaranty that we know how to make clean water from sea water.

We make reliable and quality energy recovery watermakers at an affordable price with Clark pump . This pump lowers energy consumption as much as 85% compared to conventional watermakers.

Why Aqua Nautica Watermakers?

• Superior quality at most affordable price
• 12V – 24V models
• 85% less energy consumption then standard hi-pressure watermakers
• No need for generator.
• Quiet operation.
• Very little maintenance.
• Total absence of vibration
• Simple to use: no need to adjust pressures. Entirely hydraulically operated, the machine is automatically self-regulating according to operating conditions
• Very easy installation

Watermaker Aqua Nautica AN-25

Promo price: €3960 €3564 excl tax.

25 liters / hr. (6.6 U.S. gal./hr) 9 amps / 12 VDC 4,5 amps / 24 VDC

The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33g/ltr.

Watermaker Aqua Nautica AN-30

Price: €4180 €3762 excl tax .

30 liters / hr. (7.9 U.S. gal./hr) 13 amps / 12 VDC 6,5 amps / 24 VDC

The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33g/ltr. Silent operation.

Watermaker Aqua Nautica AN-50

Price: €4840 €4356 excl tax.

50 liters / hr. (13.2 U.S. gal./hr) 18 amps / 12 VDC 9 amps / 24 VDC

Watermaker Aqua Nautica AN-55

Price: €4950 €4455 excl tax.

53 liters / hr. (14.5 U.S. gal./hr) 17 amps / 12 VDC 8,5 amps / 24 VDC

Watermaker Aqua Nautica AN-65

Price: €5060 €4554 excl tax.

65 liters / hr. (17.1 U.S. gal./hr) 23 amps / 12 VDC 11,5 amps / 24 VDC

Watermaker Aqua Nautica AN-100

Price: €6300 €5670 excl tax.

100 liters / hr. (26.4 U.S. gal./hr) 35 amps / 12 VDC 17,5 amps / 24 VDC

How to buy watermakers?

Aqua Nautica watermakers can be purchased through our distribution network and delivered almost anywhere in the world. To purchase the device, contact your geographically nearest distribution center or authorized distributor

Aqua Nautica Energy Recovery pump

Recover and effectively re-use the energy wasted in conventional reverse osmosis. The waste brine stream contains up to 90% of the used energy. By recovering this energy, we are able to dramatically reduce the power needed to desalt seawater.

How it works?

An energy recovery device (Clark pump) transfers the energy normally wasted in conventional systems at the membrane exit, and passes it to the incoming raw water, dramatically lowering the power required to operate the system.

Excellent reliability and simplicity

Is reached through serious design choices and years of experience. Easy to use and no specific skills are requested.

Best watermakers on market

We make reliable and quality energy recovery watermakers at an affordable price.

FRENCH DESIGN

Components we use are produced by some of the best companies in the world: Membrane pumps  –  Shurflo , Motors – Amer motor , Sealing materials – SKF , Rotary Wane pumps – Fluid-o-Tech , Pressure Tanks – Zilmet , Membranes –  DOW Filmtec , Relief valves; Fittings – AGNEP , Pressure gauges – WIKA , Hoses – ZEC , Clark pumps – Aqua Nautica . In our production we use most advanced CNC machines .

Testimonials

“I was among the first to purchase an Aqua Nautica watermaker at the Paris boat show, a 25l/h model. It is easy to install, I installed it myself, and it responds flawlessly to all our needs. needs fresh water while in summer we sail in the Mediterranean.” 😊

“The Aqua Nautica watermaker is a robust and reliable device. Its big advantage, for me, is that there are no electronics at all, no additional adjustments or risk of electronic failure. Their service in line is fast, with clear and precise instructions, videos and photos. As for the device, anyone can repair it mechanically, even on the high seas.”!

“I searched with many different manufacturers, but I couldn’t find a device that was as cheap or of better quality anywhere. Aqua Nautica’s prices are up to 30% to 40% cheaper, and the The device is of better quality than many more expensive brands.”

V. P. 

  “I purchased an Aqua Nautica watermaker in the Adriatic three summers ago on the recommendation of a charter agency who use them on all their boats. The winterization process is simple and easy.”

“My Aqua Nautica watermaker is the most important crew member on my round-the-world sailing trip.”

[email protected]

+381 11 3435330

+381 64 1424414

© 2024 Aqua Nautica

KE+ Electronic Engine Controls: Prices are Low – Don't be Slow!

• Watermakers

Spectra Watermakers

Spectra Newport 400 Watermaker Automated Connect Series 12V/24V System

Write a review.

• Create New Wish List

Description

Warranty information, spectra newport np400c watermaker automated connect series 12v/24v dc system.

The Spectra Newport 400 Automated Connect 12Volt or 24Volt produces 17 gallons (64 liters) of water per hour. The Newport 400c operates on as little as 15 watts per gallon (4 watts per liter), making it possible to run your system on a small generator, solar, wind, batteries. Multi-speed capacity allows machine operation on high mode for maximum product flow or low mode for maximum efficiency, making it ideal for onboard power management. The system will automatically switch to low mode to extend the prefilter life in challenging feed water. The system comes standard with the Spectra Connect controller. Add the Z±ION Membrane Protection System to extend storage times for up to 30 days.  Because Spectra has MAP pricing on all its systems, we can only offer a low price directly.

• Completely automated  - With the Spectra Connect controller
• Lower power consumption  - Batteries, Solar or Wind Power
• Whisper quiet  - One of the most quiet watermakers on the market
• Commercial grade diaphragm -  Pumps with run-dry protection
• From the Arctic to the Equator  - Designed to operate efficiently in all water
• System includes -  Complete unit, handheld TDS tester, plumbing, set of filters, product sample valve
• Z-Ion Compatible
• Also -  Manual bypass for diversion valve, commercial grade continuous duty motor, optional additional local display

Specifications:

• Production / Hr:  17gal (64l) every hour
• Production / Day:  400gal (1514l) a day
• Weight:  110lbs (50kg)
• Power Requirement:  12v DC @ 24A  or  24v DC @ 12A
• Salt Rejection:  99.2%
• Temperature Range:  110F - 36F
• System Warranty:  1 Year
• Clark Pump Warranty : 1 Year, Lifetime with installation by a Spectra Dealer

Spectra Connect Controller:

The Newport 400 Connect includes the Spectra Connect Controller. The Connect Controller is the updated display replacing the old MPC display on models like the NP-MK IIZ. The new part allows you to control and monitor your watermaker from your cell phone, anywhere in the world. And anywhere in your boat with the mountable connect controller. Spectra Connect adds new features that were unavailable on the previous MPC models, including:

• Tank full switch
• Remote TFT color touch screen panel
• Product water quality & temp. sensor
• Battery voltage readout ready to connect to ships local network
• Operation, monitor, configure from computer, smart phone or tablet
• Data logging & technician access page features

Options for Newport Connect Systems:

• Z-Ion Protection System - Z-ION-NP
• High Capacity Intake Module - KIT-NP-MK2-HCFU
• Additional Remote Spectra Connect Display - KIT-SC-RMPNL
• Spectra Connect Wi-Fi Access Point - EL-SC-AP
• Tank Level Sensors (max 2) - KIT-SC-TNKSS
• Tank Low Switch

The Newport 400C System includes:

• Seawater strainer
• Boost pump module with service valve
• Dual pre‐filter housing with 5 and 20 micron filter elements
• Spectra Magdrive feed water pump
• Two accumulators
• Spectra Connect remote display with 100’ cable
• Automatic back wash fresh water flush with charcoal filter
• Composite Spectra High Pressure Pump
• One 40 inch high rejection/high yield spiral wound reverse osmosis membrane or
• Two 20 inch high rejection/high yield spiral wound reverse osmosis membranes for the compact system
• Spectra free flow ultra efficient high pressure vessel assembly
• One built‐in 3‐way valve and quick‐disconnect for cleaning and flushing procedures
• 25 feet LP product tubing
• 25 feet suction hose
• 25 feet reinforced sea water hose
• All required tube fittings and hose clamps
• One SC‐1 storage chemical
• Complete installation and operation manual
• Warranty registration card

Downloads and Resources:

• Newport 400C Manual [ PDF ]
• Newport 400C Data Sheet  [ PDF ]
• Save Money with a Spectra Watermaker  [ PDF ]

Customers usually purchase the following with their watermaker:

• Spectra Filters and Cruise Kits
• Spectra Chemicals
• ZION-MAN for Manual Systems
• ZION-AUTO for Automated Systems

Related Parts:

• Newport NP-400R Remote Manual
• Newport NP-400RS Remote Manual Compact
• Newport NP-400C Connect
• Newport NP-400cS Connect Compact
• Newport NP-700R Remote Manual
• Newport NP-700C Connect
• Newport NP-1000R Remote Manual
• Newport NP-1000C Connect
• Tech Support:  View Our Tech Support Page
• Stock Inquiry:  Stock Inquiry Page
• No sales tax on purchases outside of California
• Built to Order - Average 30 day lead time
• Distributed by Spectra Watermakers
• Replaces the part number NP-MK IIZ-400

International Customers: We Ship Worldwide, Shipping Cost May Quote Too High on Our Web Site,  contact us  for a quote.

Videos hide videos show videos.

Spectra Watermakers Review - Seatech Marine Products

Spectra Watermakers customers give their first hand review of ...

Related Products

Spectra Newport 700 Watermaker Automated Connect Series 24V DC System

Spectra Newport 1000 Watermaker Automated Connect Series 24V DC System

Spectra Newport 400 Watermaker Automated Connect Compact Series 12V/24V System

Spectra Newport 400R Watermaker Remote Manual Series 12V/24V System

Spectra Watermakers Newport 400RS Remote Compact Series 12V/24V System

115V / 230V & DC12V

Rainman watermaker.

The Rainman Watermaker AC model, it uses an onboard power source like a generator or inverter to power the unit. This configuration can be ordered in either 115V(US) or 230V(Europe).  Please contact us if you are unsure which power configuration to order. AC Systems are capable of up to 37 GPH.

The 12V DC model requires 30 amps around 410 watts. DC system are capable of 7-9 GPH.

ORDER YOUR RAINMAN SYSTEM

Complimentary supply kit.

Your Rainman Watermaker will be delivered with a complimentary supply kit of consumables to cover your first few months of use, nothing more required,  everything is included.

All consumables are non proprietary, so you will be able to get stock locally, even without a dealer!

TWO COMPONENTS – ONE SYSTEM

The rainman watermaker consists of two components. the pressure supply unit and the reverse osmosis membranes. together they make a complete rainman watermaker desalination system..

PRESSURE SUPPLY UNIT (PSU)

The Pressure Supply Unit(PSU) is selected based on your power supply onboard. The PSU pumps the seawater in, filters out dirt and sediment then puts the system under high pressure for operation. A set of membranes connect to the PSU to extract drinking water from the seawater,  which is the basic operation of the system.

REVERSE OSMOSIS MEMBRANE

(psu) unit options.

115V Rainman systems are designed to operate drawing around 12 amps – around 1250 watts steady state power consumption. A generator as small as a Honda EU2000i will work for this system

230V Rainman systems draw approx 6 amps – around 1250 watts steady state power consumption. A generator as small as the Honda EU20i will work for this system. Your preferred plug can be selected upon order.

12V DC systems require around 30 amps to operate – around 410 watts. The Rainman system is ideal for folks wanting to avoid the complexities and maintenance of more efficient energy recovery systems.

MEMBRANE OPTIONS

HIGH OUTPUT

The high output membrane is the flagship model – designed specifically for the Rainman Electric  Pressure Supply Units. With the High Output Case, you can expect to produce between 26 – 37 GPH. This is our most popular and highest output option.

An ideal companion for the electric PSU if you are short on space, and do not require the higher output that the High Output membrane provides. This compact case, together with the Rainman Electric PSU is capable of producing between 13 – 18 Gallons Per Hour.

The most economical companion to the Electric PSU. With the Economy Membrane, you can expect production rates between 13 – 18 Gallons Per Hour*. This is also the only membrane compatible with the 12V DC Rainman system (*7-9 GPH at 12V)

SYSTEM SELECTION GUIDE

How can we help you.

Empowering Your Marine Adventures

Contact number

We are monthly supporters. click below to donate..

• HVAC & Refrigeration Services
• Marine Solar
• Marine Electrical Systems
• Solar Frame Fabrication
• Standing Rigging & Forms
• Running Rigging & Forms
• Lifeline Rigging & Forms
• Anchor Chain & Rode Form
• DIY Marina Wet Slips
• Haul-Out Facilities
• Sailboat Arches
• Stern Arch & Davit Install
• Blue Wave USA
• Cyclops Load Sensors
• Robline Ropes
• Marlow Ropes
• Mantus Marine
• Tides Marine – SailTrack
• Anchor Chain and Rode
• Waterline Design
• Furlex Furling Systems
• Selden GX & CX Furlers
• Selden SMF System
• Bamar Products
• Hood Furling Systems

• Victron & Solar Panel Store
• Kilovault Batteries
• Custom Fabricated Frames & Arches
• Mabru Air Conditioners
• Velair Air Conditioners
• Rainman Watermakers
• Spectra Watermakers
• RuuviTag Pro
• Integrel Solutions
• Manuals/Catalogues
• Account details

ARCH INSTALLATION TIPS

• Measure where you think The arch feet are going to land on the back of the boat, pick either the front or back leg landing positions and measure the span. Check for backing plate/nut access at these positions.
• Assemble the arch laying on dock and slide the sides into the bridge evenly until the leg span you measured is Approx 5-6” wider than your goal span. Tape the joints at the bridge using masking tape to stop it sliding further in when you are test fitting.
• Measure the “drop” from where you think the forward legs will land and the aft legs will land and trim the forward legs. Accordingly. I usually leave them a couple inches longer than I think they need to be, and do the final trim once I’m at the mocking up stage.
• Assemble the arch feet and install them, using string to secure them to the arch legs using a rolling hitch.
• Use a block and tackle or a truckers hitch to squeeze the legs together to match the span you are aiming for. No more than 6”.
• Hoist arch into position using topping lift or main halyard  (and two people) and test fit. At this point you can measure exactly how much you need to trim off the forward legs to make the arch fit level.
• If the arch needs to sit lower, once you have it level, you can trim both legs the same amount. Keep in mind that as the arch gets shorter the span will narrow slightly due to the geometry of the arch.
• Once you like the position, mark the feet in their positions using sharpie and lower the arch back to the dock. Release the block and tackle and drill/bolt the bridge. Drill and epoxy/bolt the feet into position.
• Hoist the arch again and check all landing positions on feet one final time. Mark bolt holes on gelcoat and move arch out of the way for drilling. Try to pick the forward or aft feet and do them in pairs, pick whichever set you think will allow you to bolt it down securely then pivot the arch back or forward to do the other pair after (check orientation of arch feet for pivot ability).
• Through bolt all feet and tighten. If fitting to an uneven surface, back fill the area behind the plate with thickened epoxy.
• Tighten all bolts on foot bases.

Salt Creek Marina and Yard Rules & Regulations (DIY & Storage)

“Common Sense, Compliance with Laws, Consideration Toward Others” (January 1, 2023)

This agreement shall be effective on the date hereunder by and between the undersigned Owner or Agent of the vessel(s) hereinafter (“Vessel Owner”) described below and Salt Creek Marina, Inc. and The Yacht Rigger LLC located at 107 15th Ave SE, St. Petersburg, FL 33701.

8/21/2023 UPDATE – If a hurricane system becomes a named storm and your boat is in one of our wet slips you MUST move it back to its original berth. The boat is not allowed to stay. The owner is responsible for planning with their preferred captain, or The Yacht Rigger has two captains on staff.

1. Fees: The Yacht Rigger and Salt Creek Marina reserves the right to change its rates upon one (1) months’ notice.

• Monohull DIY Dry Storage will be $900 monthly or $225 weekly, with a minimum of 1 week required. After the first 4 weeks, the rate will increase by $50 per week, for the remainder of the boat’s duration.
• Monohull Wet Slip will be $1,100 monthly or $275 weekly, with a minimum fee of $100.
• Catamaran Wet Slip will be $2200 monthly or $550 weekly.
• Haul / Block / Relaunch – One Time Charge $12 per foot
• Emergency Haulout – $25 per foot
• Short Haul – – – Special Haul to be scheduled by The Yacht Rigger or approved contractor only + $175 contractor fee (includes normal haul out rate)

2. Insurance: Vessel owners must provide insurance with Salt Creek listed as additional insurer on their vessel before arrival. Vessels must always be insured.

3. Hurricane & Summer Storm Season: June 1 – November 30 Haul out boats for storage or DIY work on the hard during this time are required to remove all canvas (including but not limited to Bimini, sail covers, dodgers, e.g.) as well as all sails on the boom or furlers. Remove all moveable equipment: canvas, sails, dinghies from davits, cushions, water toys, grills, biminis, roller furling sails, etc. Canvas and sails must be stored below and not on deck. Lash down everything you cannot remove tillers, wheels, booms.

4. Live Aboard – Wet Slip Only (Yacht Rigger Only Rule): Starting January 1st, 2024, customers may NOT stay on their vessel during electrical refit work or other major modifications or upgrades down below. Due to the nature of these projects requiring major upheaval down below within your living space and the need for our teams to work efficiently. Rigging and “above deck” type work will permit liveaboards. As much as we would love to accommodate liveaboards during this time, it is simply too inefficient for us and expensive for you, the customer. For vessels with excessive items on board preventing efficient work, we will provide on-site storage pods at market rates.

5. Third Party Warranties: This includes any warranty claim that is to be made against the original manufacturer or seller of the vessel or product. Should a warranty claim arise, The Yacht Rigger will estimate the job accordingly. It will then be up to the customer to obtain approval from the applicable 3rd party (boat manufacturer, spar manufacturer, etc.). If approved & immediately upon completion of the warranty issues, the customer is solely responsible for the payment of the work completed. It is then the responsibility of the customer to be reimbursed by the applicable 3rd party.

6. Yard Hours: The boatyard hours are 8:00am to 6:00pm, Monday- Sunday. The boatyard gate locks at 6:00pm. You may come check on your vessel, re-secure rigging, canvas and pump out water during business hours. Please check in with the office if you are near closing hours.

7. Utilities: Boatyard provides power & water to vessel owners as a part of their agreement so long as the owner fully adheres to all Rules and Regulations. When you are finished with the water hoses, turn them off and place them back neatly in the area you found them. Please ask a Salt Creek Marina Boatyard Employee for access to either option.

8. Outside Contractors/ Subcontractors With Management approval (determined individually) contractors may work on a storage vessel for a fee of $40 a day in addition to monthly storage/dockage fee. The owner shall be responsible for informing the office of any subcontractor working on the vessel for any purpose whatsoever. The subcontractor shall submit insurance before any work can commence. Salt Creek Marina and/or The Yacht Rigger reserves the right at its sole discretion to stop unsafe work practices and if deemed necessary to order the offending worker(s) to leave the site at the Owner’s/Skipper’s sole risk and expense.

9. Supplies: All paint including but not limited to, bottom paint, primer or barrier paint, haul or topside paint, varnish or otherwise any paint being applied to your vessel must be purchased through the Boatyard or approved by Management. This policy is for safety and environmental protection purposes of all persons operating in the Boatyard. Paint will normally arrive within 24hrs of purchase.

10. Paint Spraying: There shall be no spraying in the Boatyard under any condition. Any person spraying any paint will be immediately expelled and fines levied.

11. Cleanliness: All vessel owners shall be responsible for keeping their area clean and professional. The Boatyard reserves the right to charge the vessel owner for any cleanup required to comply with RR. All debris associated with boat repair activities must be disposed of daily. A dumpster is located near the parking area.

12. Disposal: There is a designed disposal station of 55 gal drums for oil and one for oily rags and filters located near the office door. PLEASE DO NOT PUT GASOLINE IN THESE DRUMS.

13. Facilities: Bathrooms are provided as a courtesy to all Customers. We will make our best efforts to keep it clean but reserve the right to limit access any time. Please use the outside sink for heavy clean up and use the indoor head/sink for bathroom purposes only. The Yacht Rigger has its own set of facilities to be used by its staff and customers. Please do not use SCM facilities.

14. Parking: Park in the designated parking area. Vehicles should be parked clear of travel lift path, not in storage areas, on the seawall or blocking boats. Salt Creek Marina and/or The Yacht Rigger is not responsible for vehicles that are damaged by equipment or conditions in the yard

15. Regarding noise outside of the scope of work not being completed, i.e., radio/stereo volume, please be respectful of neighboring boat owners’ tenants.

16. Salt Creek Marina and/or The Yacht Rigger is not responsible for any theft or loss of items left on or around the vessel.

17. The yard takes no responsibility for accidents, injury, or death to any persons in or working within the yard at any time. All people wishing to enter the boatyard for any reason do so at their own risk.

18. Failure to comply with these rules and conditions can result in additional charges if Salt Creek Marina and/or The Yacht Rigger personnel are required to do site cleanup operations and/or will be asked to remove your boat from the marina.

19. Additional Rules:

• Owners are not permitted to test engines, run water for AC or other purposes while on the hard. All electricity and water shall be for the sole purpose of working on their vessel and disconnected when unoccupied.
• There are to be no mobile AC / Heater Units or Refrigeration Units to be run on the hard.
•  No unfurling of sails will be permitted at any time, under any circumstance.
• There is to be no hot work, flame cutting, welding etc. to be done in the yard.
• Jack stands and blocking may only be used and moved by employees of Boatyard.
• Boatyard reserves the right to move vessels when needed without permission or notifying owners.
• Any trailer, dingy, mast, or other personal property not directly attached to the vessel must be pre-approved, additional charges will apply if approved.
• Packages – you are welcome to send packages to our address here, but please make sure they state your name and “CO The Yacht Rigger” and limit your packages to 5 a week.

Any modifications outside of these rules will be determined individually by Management. REMEMBER THESE RULES & REGULATIONS ARE FOR EVERYONE’S BENEFIT. PLEASE HELP KEEP THIS BOAT YARD A CLEAN & SAFE WORKPLACE. ** Salt Creek reserves the right to change these rules at any time.

Use coupon code to activate discount. Add to coupon code box on your cart page.

Our products are proudly manufactured here in Fort Lauderdale, Florida USA!

• Afghanistan (USD $)
• Åland Islands (USD $)
• Albania (USD $)
• Algeria (USD $)
• Andorra (USD $)
• Angola (USD $)
• Anguilla (USD $)
• Antigua & Barbuda (USD $)
• Argentina (USD $)
• Armenia (USD $)
• Aruba (USD $)
• Ascension Island (USD $)
• Australia (USD $)
• Austria (USD $)
• Azerbaijan (USD $)
• Bahamas (USD $)
• Bahrain (USD $)
• Bangladesh (USD $)
• Barbados (USD $)
• Belarus (USD $)
• Belgium (USD $)
• Belize (USD $)
• Benin (USD $)
• Bermuda (USD $)
• Bhutan (USD $)
• Bolivia (USD $)
• Bosnia & Herzegovina (USD $)
• Botswana (USD $)
• Brazil (USD $)
• British Indian Ocean Territory (USD $)
• British Virgin Islands (USD $)
• Brunei (USD $)
• Bulgaria (USD $)
• Burkina Faso (USD $)
• Burundi (USD $)
• Cambodia (USD $)
• Cameroon (USD $)
• Canada (USD $)
• Cape Verde (USD $)
• Caribbean Netherlands (USD $)
• Cayman Islands (USD $)
• Central African Republic (USD $)
• Chad (USD $)
• Chile (USD $)
• China (USD $)
• Christmas Island (USD $)
• Cocos (Keeling) Islands (USD $)
• Colombia (USD $)
• Comoros (USD $)
• Congo - Brazzaville (USD $)
• Congo - Kinshasa (USD $)
• Cook Islands (USD $)
• Costa Rica (USD $)
• Côte d’Ivoire (USD $)
• Croatia (USD $)
• Curaçao (USD $)
• Cyprus (USD $)
• Czechia (USD $)
• Denmark (USD $)
• Djibouti (USD $)
• Dominica (USD $)
• Dominican Republic (USD $)
• Ecuador (USD $)
• Egypt (USD $)
• El Salvador (USD $)
• Equatorial Guinea (USD $)
• Eritrea (USD $)
• Estonia (USD $)
• Eswatini (USD $)
• Ethiopia (USD $)
• Falkland Islands (USD $)
• Faroe Islands (USD $)
• Fiji (USD $)
• Finland (USD $)
• France (USD $)
• French Guiana (USD $)
• French Polynesia (USD $)
• French Southern Territories (USD $)
• Gabon (USD $)
• Gambia (USD $)
• Georgia (USD $)
• Germany (USD $)
• Ghana (USD $)
• Gibraltar (USD $)
• Greece (USD $)
• Greenland (USD $)
• Grenada (USD $)
• Guadeloupe (USD $)
• Guatemala (USD $)
• Guernsey (USD $)
• Guinea (USD $)
• Guinea-Bissau (USD $)
• Guyana (USD $)
• Haiti (USD $)
• Honduras (USD $)
• Hong Kong SAR (USD $)
• Hungary (USD $)
• Iceland (USD $)
• India (USD $)
• Indonesia (USD $)
• Iraq (USD $)
• Ireland (USD $)
• Isle of Man (USD $)
• Israel (USD $)
• Italy (USD $)
• Jamaica (USD $)
• Japan (USD $)
• Jersey (USD $)
• Jordan (USD $)
• Kazakhstan (USD $)
• Kenya (USD $)
• Kiribati (USD $)
• Kosovo (USD $)
• Kuwait (USD $)
• Kyrgyzstan (USD $)
• Laos (USD $)
• Latvia (USD $)
• Lebanon (USD $)
• Lesotho (USD $)
• Liberia (USD $)
• Libya (USD $)
• Liechtenstein (USD $)
• Lithuania (USD $)
• Luxembourg (USD $)
• Macao SAR (USD $)
• Madagascar (USD $)
• Malawi (USD $)
• Malaysia (USD $)
• Maldives (USD $)
• Mali (USD $)
• Malta (USD $)
• Martinique (USD $)
• Mauritania (USD $)
• Mauritius (USD $)
• Mayotte (USD $)
• Mexico (USD $)
• Moldova (USD $)
• Monaco (USD $)
• Mongolia (USD $)
• Montenegro (USD $)
• Montserrat (USD $)
• Morocco (USD $)
• Mozambique (USD $)
• Myanmar (Burma) (USD $)
• Namibia (USD $)
• Nauru (USD $)
• Nepal (USD $)
• Netherlands (USD $)
• New Caledonia (USD $)
• New Zealand (USD $)
• Nicaragua (USD $)
• Niger (USD $)
• Nigeria (USD $)
• Niue (USD $)
• Norfolk Island (USD $)
• North Macedonia (USD $)
• Norway (USD $)
• Oman (USD $)
• Pakistan (USD $)
• Palestinian Territories (USD $)
• Panama (USD $)
• Papua New Guinea (USD $)
• Paraguay (USD $)
• Peru (USD $)
• Philippines (USD $)
• Pitcairn Islands (USD $)
• Poland (USD $)
• Portugal (USD $)
• Qatar (USD $)
• Réunion (USD $)
• Romania (USD $)
• Russia (USD $)
• Rwanda (USD $)
• Samoa (USD $)
• San Marino (USD $)
• São Tomé & Príncipe (USD $)
• Saudi Arabia (USD $)
• Senegal (USD $)
• Serbia (USD $)
• Seychelles (USD $)
• Sierra Leone (USD $)
• Singapore (USD $)
• Sint Maarten (USD $)
• Slovakia (USD $)
• Slovenia (USD $)
• Solomon Islands (USD $)
• Somalia (USD $)
• South Africa (USD $)
• South Georgia & South Sandwich Islands (USD $)
• South Korea (USD $)
• South Sudan (USD $)
• Spain (USD $)
• Sri Lanka (USD $)
• St. Barthélemy (USD $)
• St. Helena (USD $)
• St. Kitts & Nevis (USD $)
• St. Lucia (USD $)
• St. Martin (USD $)
• St. Pierre & Miquelon (USD $)
• St. Vincent & Grenadines (USD $)
• Sudan (USD $)
• Suriname (USD $)
• Svalbard & Jan Mayen (USD $)
• Sweden (USD $)
• Switzerland (USD $)
• Taiwan (USD $)
• Tajikistan (USD $)
• Tanzania (USD $)
• Thailand (USD $)
• Timor-Leste (USD $)
• Togo (USD $)
• Tokelau (USD $)
• Tonga (USD $)
• Trinidad & Tobago (USD $)
• Tristan da Cunha (USD $)
• Tunisia (USD $)
• Türkiye (USD $)
• Turkmenistan (USD $)
• Turks & Caicos Islands (USD $)
• Tuvalu (USD $)
• U.S. Outlying Islands (USD $)
• Uganda (USD $)
• Ukraine (USD $)
• United Arab Emirates (USD $)
• United Kingdom (USD $)
• United States (USD $)
• Uruguay (USD $)
• Uzbekistan (USD $)
• Vanuatu (USD $)
• Vatican City (USD $)
• Venezuela (USD $)
• Vietnam (USD $)
• Wallis & Futuna (USD $)
• Western Sahara (USD $)
• Yemen (USD $)
• Zambia (USD $)
• Zimbabwe (USD $)
• Portable Watermaker Lithium Powered
• Portable Watermaker AC Powered
• Portable Watermakers

+1-954-800-8800

Offer Details*: Online orders available for in-store pick up or $40 shipping fee. Must show proof of purchase upon arrival. Offer only while supply lasts.

Our 12 Volt DC watermaker system produces 17 gallons per hour of freshwater. Like all SeaWater Pro units, this unit features manual controls in lieu of super-fancy computerized less reliable and expensive units. The optional remote control panel measures 10 x 10 inches. The optional stainless pump does not last longer, it just looks better after 2 years. The system comes with everything you need to make water. Simple and easy to install.  Strainer is not included.

• One switch operation without electronics.
• 1 Water Desalination Membrane
• 12 volt DC Industrial Motor
• High and low-pressure pumps
• 3 filter unit, 5 microns, 20 microns, & carbon 
• Automatic Switching (rinse-run)
• Rinse timer Included (backwash)
• High and low-pressure hoses
• Patented pressure regulator

Watermaker: DC 12 Volt, 600 Watts, 17 GPH Single Membrane

Couldn't load pickup availability

Phone Number

Pick up address, check out these related products, latest articles, charting your course: your first steps into the exciting world of the sea industry, perks of staying hydrated with a portable watermaker while camping, prepping your boat for hurricane season with seawater pro.

Your Cart is Empty

But your water tank doesn't have to be :)

• Choosing a selection results in a full page refresh.

First refuelling for Russia’s Akademik Lomonosov floating NPP

!{Model.Description}

The FNPP includes two KLT-40S reactor units. In such reactors, nuclear fuel is not replaced in the same way as in standard NPPs – partial replacement of fuel once every 12-18 months. Instead, once every few years the entire reactor core is replaced with and a full load of fresh fuel.

The KLT-40S reactor cores have a number of advantages compared with standard NPPs. For the first time, a cassette core was used, which made it possible to increase the fuel cycle to 3-3.5 years before refuelling, and also reduce by one and a half times the fuel component in the cost of the electricity produced. The operating experience of the FNPP provided the basis for the design of the new series of nuclear icebreaker reactors (series 22220). Currently, three such icebreakers have been launched.

The Akademik Lomonosov was connected to the power grid in December 2019, and put into commercial operation in May 2020.

Electricity generation from the FNPP at the end of 2023 amounted to 194 GWh. The population of Pevek is just over 4,000 people. However, the plant can potentially provide electricity to a city with a population of up to 100,000. The FNPP solved two problems. Firstly, it replaced the retiring capacities of the Bilibino Nuclear Power Plant, which has been operating since 1974, as well as the Chaunskaya Thermal Power Plant, which is more than 70 years old. It also supplies power to the main mining enterprises located in western Chukotka. In September, a 490 km 110 kilovolt power transmission line was put into operation connecting Pevek and Bilibino.

Image courtesy of TVEL

• Terms and conditions
• Privacy Policy
• Newsletter sign up
• Digital Edition
• Editorial Standards

Turn Your Curiosity Into Discovery

Latest facts.

How To Protect Children From Junk Food Marketing

12 Intriguing Facts About Balatro

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact: