x 402 yacht review

• Search forums
• Practical Boat Owner's Reader to Reader

X Yachts (X 402)

• Thread starter Hawkflier
• Start date 27 Oct 2010
• 27 Oct 2010

Hi guys after spending my summer yacht hunting and getting nowhere I am now following up on an X 402. As I will get but one chance to own my own yacht I can't afford a total mess-up. Can anyone direct me to a source of technical information on this yacht. I have contacted X Yachts for help but as this is not one of their current yachts I have yet to hear from them. Any views would be appreciated. I was previously looking at Sigmas (36 362 and 38) Dehlers 36 & 38 and came close to buying a Dromor Apollo 12 in Greece I either miss them or turn up problems that are best walking away from, or find that the price is just out of reach! Cheers guys  

I don't know the boat but this is what I found with a web search. http://www.sailingnetworks.com/design/details/d-x402 I don't know if you're generally familiar with what to expect from an X-Yacht. The fact that ten berths is quoted indicates she's designed for racing. SA/D is only 20.2 (OK, some forumites might consider that as on a par with being possessed by a devil but it isn't extreme at all). X-Yachts can generally be raced well. You do need to know how to get the best out of a fractional rig (which the X-402 appears to be) to sail one. They brand does tend to have a reasonable cruising fit out, with quality generally above a mainstream AWB but below the HR/Najad etc. Scandanavian standard, but still they're often described as racer-cruisers rather than cruiser-racers. Some will be racier than that, so if you're looking for a boat that can be cruised you'd want photos before spending too much on travelling to see the boat. Generally, I'm a big fan of X-Yachts and if I ever win the lottery I might well be phoning them. However, if you've a very cruisey background you might have a bit of a learning curve sailing one when it gets a bit windy. They're perfectly OK though if you trim the sails properly. Also get a few insurance quotes before you commit yourself. Some insurance companies seem to dislike them.  

Active member

Which one is it? I had 'a financial interest' in one in 1986, from new. Masthead rig - probably a mistake in hindsight. Until then I'd only raced mastheads, and with a far better boat I wanted to minimse the gradient of the learning curve. Skippered it for several thousand miles and got to know it very well. At that time, there was no other yachtbuilder offering such a well engineered product - if you wanted a lead keel in those days you could only go for a one-off. If you wanted winches that you might actually be able to wind, you paid for the upgrade. Not with X-Yachts. You sail a 402 on the instruments. Upwind you move the (huge) wheel just an inch or two (of rim movement) at most. Trying to avoid saying it, but it really is the best boat I have ever sailed. Only two downsides that I can remember. 1. Keep the cockpit tidy. It's embarassing when lots of rope falls into the wheel trench... 2. The halyard winches on the aft corners of the coachroof would start to cant forwards at maximum tensions. Probably fixed by now on the one you're looking at. If X-Yachts had not produced boats like these, Benetau et al would never have produced their 'F' ranges. pm if you want more.  

• 11 Oct 2014

Hi all, This is the only thread on the X-402 I could find. We are in the market for a fast cruiser to race occasionally, we have considered the x-402 or all the usual suspects to be found in Croatia (jeanneaus, elans, dehlers and beneteau )where we are looking. We tried the 402, and found her to be in lovely condition, my husband is very keen on her. However on the test sail We initially had light airs and all was well. When the sea breeze picked up a little I found she became very quickly overpowered and we found her difficult to handle with only three on board. The running backstay system was difficult to manage. I don't know how experienced our owner skipper was but he seemed to be keen to return to the marina as soon as there was a little breeze. I would be grateful for any opinions  

Members online

• countingcorgi4
• MontyMariner
• TipsyWaitress

Share this page

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

X-402 is a 39 ′ 7 ″ / 12.1 m monohull sailboat designed by Niels Jeppesen and built by X-Yachts between 1984 and 1990.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Based on the X 1 TON. (1986 Int. One Ton Cup winner). Available with masthead or fractional rig.

Embed this page on your own website by copying and pasting this code.

Discover Related Sailboats

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The X 402 is a 39.67ft fractional sloop designed by Niels Jeppesen and built in fiberglass by X-Yachts between 1984 and 1990.

79 units have been built..

The X 402 is a light sailboat which is a high performer. It is very stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat. The fuel capacity is originally small. There is a short water supply range.

X 402 for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data, modal title.

The content of your modal.

Personalize your sailboat data sheet

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

How to Perform Your Own Pre-Buy Inspection

C&C 40 Used Boat Review

Sabre 386 Used Boat Review

What You Can Learn on a Quick Test Sail

Preparing Yourself for Solo Sailing

Your New Feature-Packed VHF Radio

Preparing A Boat to Sail Solo

Solar Panels: Go Rigid If You have the Space…

Ground Tackle Inspection Tips

Shoe Goo II Excels for Quick Sail Repairs

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Is It Time to Get an Electric Dinghy Motor?

Worship Your Universal M-Series Diesel With the Marinized Kubota Block

Taking Care of Your 12-Volt Lead-Acid Battery Bank

Hassle-free Pumpouts

Battle of the Teak Cleaners — Snappy Teak-Nu vs. Star Brite

New Seacocks for the Offshore Sailor

Bottom Paint Care

Quick and Safe Sail Cleaning

Are E-bikes Worth the Extra Weight and Cost?

How to Handle the Head

The Day Sailor’s First-Aid Kit

How to Select Crew for a Passage or Delivery

Re-sealing the Seams on Waterproof Fabrics

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

An established European builder offers a strong offshore performer with good looks, a few interesting twists, and only one or two minor flaws.

A small blip on the radar screen of the U.S. sailing community, X-Yachts of Denmark celebrated its 25th anniversary in 2004 by totally revamping its product line. The company was formed in 1979 by owner/managers Niels Jeppeson, brother Lars, and Birger Hansen.

Niels Jeppesen established a reputation as the designer of high-performance sailing yachts prior to forming the company. In the ’80s, he was known in racing circles as the designer of successful IOR, IMS, and other rule–based hotrods. The firm’s production yachts enjoy the same reputation for performance, along with the addition of comfortable accommodations, and quality construction methods. The first production model was the 412, which was followed by a bevy of boats ranging in size from 32 to 61 feet, though X-Yachts primary market is 32 to 44-footers. In 2000, the company introduced the IMX 40, an IMS racer that accumulated an impressive number of wins on the circuits in Europe. Historically, X-Yachts has built 250 to 300 boats per year.

In 2004, the company revised its entire product line. Michael Frank, the U.S. importer of X-Yachts, said: “The change was prompted by the success of the X-43, a performance cruiser introduced in 2003. That yacht incorporated a number of evolutionary design features and deck arrangements borrowed from predecessor models,” a more plumb bow and narrower shape forward, for instance, coupled with proportionally longer waterline length. Frank said the new models reflect evolutionary updates in styling, interior layouts, cabinetry, deck layouts, and new keel and rudder profiles designed to enhance performance.

As a consequence, potential buyers began deferring purchases in anticipation of changes to other models, so the company accelerated the design process, eliminated some outdated models, and introduced new 46, 40, and 37 foot models, all of which were instant successes. Back orders now extend into 2005.

The company has been sufficiently successful in Europe, so it felt no compulsion about a major marketing push in the U.S. That situation is changing. X-Yachts has a small but loyal following on these shores, and Frank is adding to a network of dealerships in Connecticut, Annapolis, San Francisco, and Seattle in the face of the arrival of ETAP, Elan, Hanse, and other European builders making appearances stateside.

Design Except for three bootstripes at the waterline, the appearance of the X–40 seems like many of her competitors. Her high-aspect sail plan is accented by a three-quarter fractional rig and a boom that extends to the aft end of the cockpit, so she looks more traditional than new models with tall rigs and short booms. In profile, her bow is near-plumb, her sheer almost level, and her stern reversed. Her 12′ 5″ beam is so proportionate as to be almost unnoticeable, though it produces wide working surfaces under sail.

Her cabintop flows smoothly aft, the only interruption being a tiny elevation created by an instrument pod on the companionway hatch. Four long, slim ports help make her profile attractive.

On Deck The arrangement of deck hardware and lines includes two entirely new features. First: the mainsheet design (referred to as a “German mainsheet system” by the manufacturer) consists of four ball-bearing blocks for mainsheet and traveller controls, so trimming the sail does not require the strength of a weightlifter. The unique aspect is that the mainsail is trimmed from the cockpit coaming, rather than from the pit or atop the companionway. The mainsheet leads from the traveller up to the boom and then forward from the end of the boom to the mast where it then drops down to the deck on either side and disappears below the deck in a run near the shrouds. It reappears on either side of the cockpit at Anderson 40 winches located just aft of the primaries. The result is that there are fewer bodies and strings in the cockpit and the helmsman or trimmer can trim the mainsheet and traveler simultaneously, and ease the mainsheet quickly in a puff, without interfering with the headsail trimmer. These are all significant advantages, even on a cruising boat.

Load-adjustable Fredericksen genoa cars that allow fine-tuning the headsail without leaving the cockpit are standard equipment on the X-40. One option on our test boat was package of electric primary winches ($7,300) that replaced the two-speed Andersen 46 self-tailers that come as standard equipment.

For cruisers, a dodger lives on the cabintop in a fiberglass trough so it is nearly flush to the deck when not in use. An easily removable zippered synthetic leather cover protects it from the elements. When elevated, the height of the dodger is low enough for a 5′ 10″ driver to see over the structure, allowing the helmsman a 360-degree view while the crew is protected from the elements.

The company installs a tapered, triple-spreader, anodized aluminium mast that was specifically designed for this boat, rather than specifying a shorter version of spars used on other models. The mast-collar is integrated in the fiberglass deck structure, and mast blocks are mounted and secured in the deck structure. Shrouds are deadended in tip cups connected to a stainless steel tie rod under the deck that is connected to side stringers in the hull to produce a stable platform for the rig.

Standing and running rigging is higher quality than found on most production cruising yachts. The standing rigging is discontinuous stainless steel rod with rod turnbuckles. And main, genoa, and spinnaker halyards all are Spectra, producing strength that resists stretching. Halyards, reef lines, cunningham, vang and outhaul are led to two, five-part Spinlock XCS winch stoppers located on the cabintop.

The teak toerail is 1 1/4″ high from bow to mast, then diminishes to a height of 3/4″ from the mast to the stern. That is lower than seen on many oceangoing yachts, but it’s coupled with double lifelines run through eight stainless-steel stanchions, tall enough to meet EC and ORC safety requirements. Stainless steel mooring cleats are located fore and aft; additional cleats are an option.

With 9′ 1″ of fore and aft space on the cockpit centerline, and the wheel well aft at the stern, the cockpit has room for 6 crewmembers to lounge, and for a racing crew of 6 to 8 to maneuver. The helmsmen sits aft of or beside a 66″ diameter, leather-covered wheel attached to a rack-and-pinion steering system that we found quite responsive regardless of the point of sail.

Two shallow storage lockers are located in the center of the cockpit sole and two on the corners are adequate for storing small items and propane tanks. Passagemakers planning an extended cruise will be required to plan efficiently for the storage of additional gear.

The smallest of three portlights on the cabinside measures 17″ x 7″, the largest 27″ x 7″. Those, coupled with two portlights in the aft cabins and 20″ square hatches in the main saloon and forward stateroom, mean that this boat has adequate light and ventilation except in the steamiest climates. Hatches in the saloon and forward cabin are fitted with Oceanair units containing both flyscreens and blinds.

Bottom Line: This boat is well equipped with durable gear and deck hardware, and displays a few new wrinkles that we might like to see on other boats in this genre.

Accommodations Scandinavian boats are known for their woody interiors, quality of workmanship, and finishes, and the X-40 is no exception. And the spaces belowdecks are well organized for cruising or daysailing.

Interior lighting is provided by 11 halogen fixtures and two dome spotlights cleverly integrated and almost out of sight in the liner. An additional fixture is located at the chart table.

The main saloon on our test boat was finished with teak veneers that are hand polished to a satin finish and teak laminate floorboards, all accented by a bright white ceiling and overhead that reflect light to create a feeling of spaciousness.

The length of the main saloon from the foot of the companionway to the main bulkhead is 11′ 2″. With 6′ 3″ of headroom and settees that measure 6′ 7″, a crew of six to eight will not feel cramped.

Two layouts are offered, both with the galley to starboard opposite the nav station, and dining area to starboard. Our test boat was fitted with two staterooms aft and the skipper’s quarters and head forward; an alternative is a two-stateroom, two-head version.

With one exception, both models provide comfortable accommodations. However, as with the X-332-Sport that we tested prior to its being replaced by an as yet unbuilt 35-footer, space in the aft stateroom (where the head is located on the X-332) is compromised by the intrusion of the cockpit lockers. As a result, though the forward sections of the staterooms have more than 6′ 4″ of headroom and room to dress, the space above the berth is low enough to be a headknocker.

Beyond that, the layout offers diners room to sup on a trapezoid shaped, leafed table measuring 47″ x 35″ fitted with a built-in bottle locker. Outboard on both sides of the saloon are enclosed cabinets designed for the storage of drinking glasses and the like. The table is positioned far enough to starboard to allow passage on the centerline with the leaf down. Diners seated to port can use its surface simultaneously—a good arrangement.

The nav station offers a seat facing forward, under which is a storage area, chart table, large electric panel and bulkhead with room for VHF, SSB radio, and other electronics. The papers and tools that inevitably accumulate at a nav station may be stored in the 2′ 3″ x 3′ 1″ table, outboard in an open cabinet, and in three drawers below the table, some of which will probably be reallocated for galley tools.

The galley is a typical L-shaped space with a four-cubic-foot, top-opening icebox (cooled by a Coolmatic 85 refrigerator unit) incorporated here. Storage is on shelves and in cabinets enclosed by Plexiglas sliding doors, and 10″-wide drawers that are ample for plates, cutlery, pots and pans. However, most dry goods will have to be housed in other areas. The twin stainless steel sinks are a plus, as are granite countertops measuring 20″ x 26″ and 14″ x 20″ that provide a chef with ample room to operate. Standard equipment includes a gimballed, stainless steel, Techimpex two-burner stove with oven. The freshwater system consists of hot and cold pressurized water with approximately 46 gallons of fresh water held in a plastic tank. Mixing water taps are fitted in the galley and head.

As with the deck arrangement, we found two subtle features adding to the vessel’s utility, of which other boat manufacturers could take note: The skipper’s quarters are forward in a stateroom surrounded by wood finished as nicely as the main saloon. Lockers and lounging chairs are located port and starboard, aft of a V-berth that measures 6′ 4″ on the centerline. Reading lights are located at pillow height on both sides of the hull. Space for storing bedding is located underneath the berth.

Unlike builders who simply tack open shelves to the hull sides, X-Yachts has cleverly attached storage cabinets running the entire length of the stateroom, a godsend for distance cruisers.

In the three-cabin version, each aft cabin has a double berth measuring 7′ 0″ on centerline; the staterooms are separated by a fixed bulkhead. Interestingly, other builders accomplish the split by inserting removable partitions to facilitate the removal of a box covering the aft end of the engine. X-Yachts takes the opposite approach, with a better result; a two-piece engine cover is easier to remove, and takes up less space in the compartment when removed, and the fixed bulkhead produces a better sound barrier between the staterooms.

The aft staterooms are also furnished with deep shelves running along the hull that are significantly wider and deeper than those seen on most boats, where they often seem to be cosmetic afterthoughts rather than functional units, unless enclosed by long nets.

The head is too small, but can be accessed from the main saloon and the forward stateroom. Measuring only 3′ 3″ x 3′, it is not much wider than the shoulders on a typical 6′ adult, but headroom is 6′ 1″.

Bottom Line: Considering the living spaces, their arrangement and apportionment, and the fit and finish of the interior, the X-40 lives up to the company’s reputation for producing a nicely finished product. The clever use of hull space for storage is a real plus, as is the arrangement of the engine box; but, a larger head would be a real plus for a 6′ 4″ full-bodied crew.

Construction X-Yachts has a history of building solid vessels designed to be used in heavy seas, or abused on the racecourse. Though the company is now building for a cruising market, the standard remains the same, as X-Yachts’ products are built in accordance with the European CE-Certification and meet the requirements of the CE-directive 94/25/CE for category A (ocean) recreational craft. Among the requirements are that a yacht must be designed to operate in waves up to 21 feet and winds of Beaufort force 10 (45 – 55 kph), or less. The company says the yachts fulfill the standard of the ABS Hull Certification that includes the hull, deck, keel, keel attachment to the hull, rudder, rudderstock and bearings, as well as bulkheads and frames.

Hull and deck are laminated in a sandwich construction consisting of isophthalic polyester resins and biaxial E-glass fabric surrounding a compressed Divinycell® core. Additional reinforcements of biaxial E-glass are laid in high stress areas around the keel and rudder. The hull-deck joint is secured with polyester resin and through-bolted.

Unlike most production builders that construct a grid support system of fiberglass, X-Yachts installs a steel frame constructed of hot-galvanized steel that absorbs the loads from keel, mast, and rig. A well-conceived addition is a hoist attachment point bedded in the grid that takes the guesswork out of hoisting the boat. Structural bulkheads are constructed of marine plywood in thicknesses of 1/3″ to 7/8″ that are bonded to both hull and deck.

The keel is a cast iron fin with a lead bulb enclosed in a layer of GRP; X-Yachts’ keels are faired with a polyester compound before leaving the factory, a contributor to balance and performance.

The rudder blade is constructed of biaxial fiberglass and Divinycell®. The rudderstock is solid aluminium, tapered at the ends to reduce weight, but strengthened by three welded wings. Upper rudder bearings are rollers, lowers are self-aligning.

The Yanmar 40 hp diesel engine is mounted on rubber shock absorbers; a 16″ folding propeller is standard. The engine panel, located in the cockpit, is recessed and enclosed in Plexiglas; standard gauges are tachometer, oil pressure alarm, water temperature, and hour meter. The X-40 carries approximately 20 gallons of fuel in an aluminium tank.

Price The company’s products are priced at the high end of the market and, according to Frank, “have the quality and value of J/Boats and Sabre Yachts,” which are considered to be among the best production boats manufactured in the U.S.

The base price for the X-40 with a 2 or 3 cabin layout is $287,100. However, a fully equipped boat with instruments and sails will carry a sticker price of $315,000 to $325,000, FOB the East Coast.

In lieu of the standard 6′ 5″ keel, a 5′ 6″ shoal draft alternative is available (for an additional $2,275), or you can opt for a 7′ 6″ deep draft keel (for $4,725).

Performance Based on a test sail of the X-332 Sport that took place shortly before the company discontinued production of that model, we had great expectations for the X-40. Despite sailing on the Chesapeake Bay in less than ideal conditions, she performed as well as advertised. For openers, we sailed with a borrowed mainsail that was 18″ short on the hoist and 12″ short on the foot. Thankfully, our test boat carried the standard 135% jib.

Sailing on flat water with the windspeed ranging from 0 to 6 knots, she managed to produce 5 knots of boatspeed on the GPS while pointing to within 35 degrees of the apparent wind, and duplicated that performance when we eased sheets. Though she had no stores aboard, we sailed with a crew of roughly 2,000 pounds. Few production boats in this size range will duplicate that performance. We consider this a fair test of her ultimate performance, since most modern boats will sail to their designed hull speed in 10 knots of wind, and can be reefed when the wind pipes up.

Under power, the X-40 motors at 7 knots at 2,300 rpm, and 8 knots at 3/4 throttle, and turns smartly in her own length. We were troubled by the sound of an electric motor after turning off the ignition until we learned that standard equipment includes a bilge blower on a timer that operates for two minutes after depowering—an excellent idea that’s likely borrowed from the powerboat industry.

Conclusions With more than two decades of experience, and a Scandinavian boatbuilding heritage, X-Yachts enjoys an excellent reputation in Europe that may be duplicated on these shores if Frank is able to build a nationwide distribution system.

This boat’s pluses include a well-conceived and equipped deck layout, a sensibly arranged interior down below with high-quality finish and joinery; and a hull shape and appendages that will produce fast bluewater passages. Though there are few, the negatives include a confining head and a big sticker price; the latter, admittedly, would likely be offset by a strong trade-in value.

If we were in the market for a new 40-foot sloop, we’d give this boat a close look and consider it a legitimate performance cruiser, and—for the competitive skipper—a viable candidate for buoy or distance racing.

Contact – X-Yachts USA, 203/353-8118, www.x-yachts.com .

Also With This Article “Critics Corner: X-40”

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

Tayana 37: What You Should Know | Boat Review

Monitor Your Whole Boat From Home On A Mobile App

Beneteau 423: What You Should Know | Boat Review

Buying A Sailboat Is Scary! Yacht Broker Interview

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Forgot your password?

Enter the email address linked with your account and we'll send you a secure link to change your password.

X-Yachts of Denmark 40

Voula, greece, sailing yacht.

• Max Sleeping guests: 6
• Max Cruising guests: 7
• Boat type: Sailing Yacht
• Length: 40 ft (12 m)
• Bathrooms: 2
• Kitchens: 1
• Contact Owner
• Manufacturer: X-Yachts of Denmark
• Model: X-402
• Built in: 08 / 1990
• Engines: 1 x 36hp
• Fuel Type: Diesel
• Consumption: 4 L /Hour
• Water capacity: 400 L
• Fuel capacity: 90 L
• Max Cruising Speed: 7 knots

Beds: ( 6 )

Description:.

Leisure Sailing vacation with the "Swimming Pool" always following you...onboard! With this yacht, you are not jut chartering a Sailing Yacht but a unique sailing experience of the fabulous Saronic and Argolic Gulfs! Cruising the Athenian Riviera, the Saronic Gulf or the Greek islands onboard the yacht can include ancient sites, peaceful coves, lively or quaint town harbours; always in crystal-clear waters. A week or a longer holiday can allow you out in to the closer Cycladic islands. An ideal plan can be tailored to your group’s interests and sailing skills. Thrilling sailing or more conservative cruising is your choice. Always carefree and safe with your Skipper aboard, whose presence on board is mandatory. Learning how to sail is your added bonus! Our vessel is a fully refitted, fast and very well-equipped 40’’ performance sailing yacht, designed and made by Χ-Yachts of Denmark. The yacht is at all times skippered and your price includes the amount of 200Euros/day for the skipper's fees. Your skipper, Tolis, was born to Greek parents in Athens, with English and German education and with an MBA postgraduate University degree. He has owned, skippered, and raced 4 yachts to date since 1981 with over 50 trophies and distinctions to show for it. He is fully tri-lingual in English, German and Greek. Besides taking you to lovely places to enjoy swimming, eating and leisure Tolis can and will initiate you to the secrets of sailing.

Crew: ( 1 )

Crew languages:.

Use two fingers to move the map

Main marina:

Cancellation policy:, regulations:.

• Smoking not allowed indoors
• Not suitable for pets ?
• Events & Parties not allowed
• Not suitable for infants ?
• Check-in time: Flexible
• Check-out time: Flexible
• Day use check-out time: Flexible

We had a weekend in Athens and limited prior sailing boat experience; wanted to relax, experience a more localized tour, do a bit of snorkeling etc and found Tolis' listing. Visited Aegina island's many different spots including the Afair temple, Moni, Perdika and various areas to snorkel. Breakfast and lunch on board was excellently prepared by Brenda - we enjoyed thoroughly. Dinner was at a local Greek restaurant on Perdika which was also very good. The boat itself was lived-in with tweaks here and there that made it feel much more personalized than other stock boats. It was spacious for our party and well maintained. Through the weekend we got to learn (and help out) a little bit more about the art & science of sailing from both Tolis and Brenda which was both insightful and interesting. It was a great experience and checked all the boxes we had in mind.

Response from Apostolos:

Thank you Glenn for your fair and accurate review.

Your message has been sent!

Apostolos will contact to you as soon as possible to answer any questions regarding this listing.

Your messages have been sent!

The owners will contact to you as soon as possible to answer any questions regarding your trip.

Your message has been sent! Send message to other similar listings.

Apostolos will contact you shortly. In the meantime, we suggest you send a message to the following similar boats, so you have more options before choosing the ideal one for your trip.

About your trip

• Smoking allowed on deck
• Not suitable for pets
• Not suitable for infants
• Suitable for children

Security deposit: $ 536 ?

Please bring your own swimming towels

Payment Options

Confirm and pay.

• Bank Transfer
• Or Another Method

It is important that you first contact a BednBlue representative as there may be a delay in completing the transaction and we must ensure that the listing remains available for you.

BednBlue asks everyone to confirm a few things before travelling or chartering.

BednBlue asks everyone to confirm a few things before contacting other members.

You'll only have to do this once.

Your email address has not been confirmed yet. Please check your inbox and click on the link that has been sent to you.

Enter the 4-digit confirmation code below:

Code hasn't arrived?

You can retry in .

The code you entered is incorrect. Please try again.

This helps the captain to recognize you when you check in, so make sure your face is shown.

A profile photo helps owners get to know you and enhances trust, so make sure your face is shown.

cropping...

Booking Advisor Form

Fill in the form below and you will soon receive suggestions with the ideal yachts for your trip.

Sleeping guests

Cruising guests

Your form has been submitted successfully!

A travel expert will contact you shortly to suggest the ideal yachts for your trip.

• Booking Advisor

Let a travel expert suggest the ideal yachts for your trip.

Increase your bookings

Stand out from the competition and attract more bookings.

• Help Center
• Terms of Service
• Privacy Policy
• Rent a Boat in Greece
• Deciding to list
• Add listing
• About Listing
• Sailing Distance Calculator

X-40 Standard

Sailboat specifications.

• Last update: 3rd April 2020

X-40's main features

X-40's main dimensions, x-40's rig and sails, x-40's performances, x-40's auxiliary engine, x-40's accommodations and layout, x-40's saloon, x-40's fore cabin, x-40's aft cabin.

Similar sailboats that may interest you:

Yacht Summary

• Manufacturer: X-Yachts
• Model: X-402
• Build Number: 50
• Build Year: 1986
• Lying: VENEZIA, Italy
• Price: Sold
• Dealer: X-Yachts France
• Contact: Jean-Luc Chalant
• Phone: +33 (0) 494 45 37 33
• Email: [email protected]

Owner's Comments

The X-402 is a "vintage racing " yacht with marine and comfortable interrior. Fast cruising for a very bargain price !

Standard Specification

Standard X-402 brochure

Exterior Details

• White hull repainted with darkblue stripes
• Osmosis treatment
• Grey antiskip gelcoat on the deck
• Electric windlass
• Teak in the cockpit
• Steering wheel

Sail Handling

• 6 ST Winchs LEWMAR
• Spinnaker deck fitting with spinnaker pool
• Dacron Main 3 reef 2010 + lazy bag and lazy jack
• Furling genoa,
• Spinnaker x 2

Mast & Rigging

• Aluminium mast, racing version
• Standing riging replaced 2010
• Spinnaker pool
• Inner forestay
• Headsail furler

Hatches / Portlights / Ventilation / Sprayhood

Accommodation.

• 3 cabins layout with 1 bathroom
• VOLVO 28 HP Refit 2010
• Fresh water pressure
• Hot water with boiler
• Battery charger

Electronics

• SIMRAD IS 15 Log, speed deepth
• Computer + Max Sea chartplotting
• Autopilot NKE 6000

Join our Mailing List

Join our monthly email mailing list to get all the latest information and news from X-Yachts directly in your inbox.

Yachting Monthly

• Digital edition

• Dick Durham
• September 23, 2010

The X-412 is built for both comfort and speed. So does she rate as the perfect cruising boat ? Dick Durham finds out

Product Overview

Overall rating:, manufacturer:, price as reviewed:.

Lean and hungry-looking she may be, but there is nothing wanting in her performance, below decks living, or construction. The spade rudder may put some buyers off, but it has a minimal keel skeg and is so well built it is unlikely to be a safety issue. Rob cruises her happily with wife Jo and their four-month-old baby Isabella. She’s a beautiful boat and will inspire, but she’s not for the faint-hearted.

Short presentation of boats in the club..

Photo  ( Gallerie with 5-6 photos)